Recent IBETON publications
Peer reviewed Journal Articles
2024
Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures
Malja X.
Thesis dissertation, Switzerland, 2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
Model uncertainty in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures
Malja X., Nussbaumer A., Muttoni A.
Structural Concrete, 2024
Recalibration of partial safety factors for permanent loads
Malja X., Nussbaumer A., Muttoni A.
2024
Experimental investigation of dowel action in reinforcing bars using refined measurements
Pejatovic M., Muttoni A.
Structural Concrete, 2024
2023
Bond of steel reinforcement based on detailed measurements: Results and interpretations
Corres E., Muttoni A.
Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.
Flat slab response for seismic and cyclic actions prediction with numerical models
Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.
Engineering structures, 289, 2023, 19 p.
Bond deterioration of corroded reinforcements in SFRC: Experiments and 3D laser scanning
Wang X. L., Liu Y. Q., Yoo D. Y.
Cement and Concrete Composites, Vol. 137, 2023, 19 p.
Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches
Ravasini S., Vecchi F., Belletti B., Muttoni A.
Engineering Structures, 284, 2023, 18 p.
Punching tests on edge slab-column connections with refined measurements
Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.
Engineering Structures, Vol. 288, 2023, 24 p.
Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear
Yu Q., Simões J. T., Muttoni A.
Engineering Structures, 2023
2022
Design of slender and squat reinforced concrete members with shear reinforcement
Pejatovic M., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, 17 p.
DOI : 10.1002/suco.202200887
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Explainable ensemble learning model for predicting steel section-concrete bond strength
Wang X. L., Chen A. R., Liu Y. Q.
Construction and Building Materials, 352 (2022), 2022, 16 p.
Enhancement of the punching shear verification of slabs with openings
Borges dos Santos J., Muttoni A., Melo G. S.
Structural Concrete, 2022, pp. 1-18.
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
2021
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer
Monserrat López A., Fernández Ruiz M., Miguel Sosa P.
Engineering Structures, 2021, 17 p.
The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Fernández Ruiz M.
Engineering Structures, 231, 2021, 17 p.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
2020
A state of the art of flat-slab frame tests for gravity and lateral loading
Coronelli D., Muttoni A., Pascu I. R., Ramos A.P., Netti T.
Structural Concrete, 2020, 18 p.
A detailed view on the rebar-to-concrete interaction based on refined measurement techniques
Cantone R., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 226, 2020, 19 p.
Tensile response of textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 258, 2020, 22 p.
Concrete compressive strength: From material characterization to a structural value
Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2020, 21 p.
Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields
Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 215, 2020, 14 p.
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.
Structural Concrete, 1, 2020, 28 p.
Influence of Load Duration on Shear Strength of Reinforced Concrete Members
Tasevski D., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.
Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack
Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.
Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.
Structural Concrete, 2020, pp. 1-17.
2019
Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence
Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.
Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.
From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.
Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.
ACI Structural Journal, 116, 2019, 261-274.
Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions
Tasevski D., Fernández Ruiz M., Muttoni A.
Structural Concrete, 20, 2019, 971-985.
2018
Parametric analysis on punching shear resistance of reinforced-concrete continuous slabs
Belletti B., Muttoni A., Ravasini S., Vecchi F.
Magazine of Concrete Research, 2018, 14 p.
Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates
Tasevski D., Fernández Ruiz M., Muttoni A.
Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.
Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model
Simões J. T., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2018, pp. 191-216.
Mechanical Model for Drift-Induced Punching of Slab- Column Connections without Transverse Reinforcement
Drakatos I.-S., Muttoni A., Beyer K.
ACI Structural Journal, V. 115 No. 2, Farmington Hills, USA, 2018, pp. 463-474.
A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.
2017
Response of RC panels accounting for crack development and its interaction with rebars
Hars E., Niketic F., Fernández Ruiz M.
Magazine of Concrete Research, 2017, 23 p.
Measurements of internal cracking in punching test slabs without shear reinforcement
Einpaul J., Fernández Ruiz M., Muttoni A.
Magazine of Concrete Research, 2017, 13 p.
An analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements
Cavagnis F., Fernández Ruiz M., Muttoni A.
Structural concrete, Vol. 19, 2017, pp. 49-64.
Internal force distribution in RC slabs subjected to punching shear
Shu J., Belletti B., Muttoni A., Scolari M., Plos M.
Engineering Structures, 153 (2017), 2017, pp. 766-781.
Test and lower bound modeling of keyed shear connections in RC shear walls
Sorensen J. H., Herfelt M. A., Hoang L. C., Muttoni A.
Engineering Structures, 155 (2018), 2017, pp. 115-126.
Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement
Ribas González C. R., Fernández Ruiz M.
Structural concrete, 18, 2017, pp. 720-732.
The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions
Muttoni A., Fernández Ruiz M., Simões J. T.
Structural concrete, 2017, pp. 1-17.
Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures
Fernández Ruiz M., Muttoni A.
Structural concrete, 2017, pp. 1-11.
2016
Internal slab-column connections under monotonic and cyclic imposed rotations
Drakatos I.-S., Muttoni A., Beyer K.
Engineering Structures, 123, 2016, pp. 501-516.
Punching shear tests on compact footings with uniform soil pressure
Simões J. T., Bujnak J., Fernández Ruiz M., Muttoni A.
Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.
Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete
Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Structural Concrete, 17 No. 5, 2016, pp. 799-810.
Punching shear capacity of continuous slabs
Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.
Performance of punching shear reinforcement under gravity loading: Influence of type and detailing
Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.
Strength of reinforced concrete footings without transverse reinforcement according to limit analysis
Simões J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 112, UK, 2016, pp. 146-161.
Study on Influence of Column Size and Slab Slenderness on Punching Strength
Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.
2015
Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 103, UK, 2015, pp. 157-173.
Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models
Muttoni A., Fernández Ruiz M., Niketic F.
ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.
Experimental investigation of soil - structure interaction for transition slabs of integral bridges
Burdet O., Einpaul J., Muttoni A.
Structural Concrete, 16, 2015, pp 470-479.
Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement
Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.
Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.
Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects
Fernández Ruiz M., Muttoni A., Sagaseta J.
Engineering structures, Vol. 99, UK, 2015, pp. 360-372.
Derivation of the σ-w relationship for SFRC from prism bending tests
Amin A., Foster S. J., Muttoni A.
Structural Concrete, 2015, pp. 93-105.
Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 89, 2015, pp. 191-203.
Influence of moment redistribution and compressive membrane action on punching strength of flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 86, UK, 2015, pp. 43-57.
Peer reviewed Conference Papers
2022
Evaluation of the model uncertainty of action effects in statically indeterminate systems
Malja X., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.
A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques
Hernández Fraile D., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
2019
Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs
Belletti B., Ravasini S., Vecchi F., Muttoni A.
6th International Symposium on Life-Cycle Civil Engineering (IALCCE), Ghent, Belgium, 2019, pp. 2745-2752.
New perspectives for design of lightweight structures by using textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
fib Symposium, Krakow, Poland, 2019, 8 p.
The potential of textile reinforced concrete for design of innovative structures
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.
Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.
2018
Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions
Muttoni A., Fernández Ruiz M., Simões J. T.
fib Congress, Melbourne, Australia, 2018, 10 p.
Experimental research on Textile Reinforced Concrete for the development of design tools
Valeri P, Fernández Ruiz M., Muttoni A.
12th fib PhD Symposium, Prague, Czech Republic, 2018
Pedagogy through artisanal construction of thin-walled concrete elements: a dialogue between engineering and architecture
Valeri P, Guaita P., Baur R., Fernández Ruiz M.
IV Int. Conference on structural engineering education without borders, Madrid, Spain, 2018
Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.
Phd - Symposium, Prague, 2018
Modern experimental research techniques for a consistent understanding of aggregate interlocking
Tirassa M., Fernández Ruiz M., Muttoni A.
Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.
Design of concrete structures using structural optimization based on the stress field method
Yu Q., Muttoni A., Fernández Ruiz M.
12th fib International PhD Symposium in Civil Engineering, 2018
2017
Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression
Moccia F., Fernández Ruiz M., Muttoni A.
fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 1234–1242.
Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals
Tirassa M., Fernández Ruiz M., Anciaux G., Muttoni A.
2017 fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 740-448.
Analytical model for slab-column connections subjected to cyclically increasing drifts
Drakatos I.-S., Beyer K., Muttoni A.
16th World Conference on Earthquake Engineering, Santiago, Chile, 2017
2016
Approaches for suitable modelling and strength prediction of reinforced concrete slabs
Cantone R., Belletti B., Muttoni A., Fernández Ruiz M.
fib Symposium, Cape Town, South-Africa, 2016, pp. 21-23.
Compressive membrane action effects on punching strength of flat RC slabs
Cantone R., Belletti B., Manelli L., Muttoni A.
Key Engineering Materials, 8th International Conference on Concrete under Severe Conditions - Environment and Loading, CONSEC 2016, Vol. 711, Lecco, Italy, 2016, pp. 698-705.
Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions
Tasevski D., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.
Punching shear strength and behaviour of compact reinforced concrete footings
Simões J. T., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.
2015
Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete
Tasevski D., Fernández Ruiz M., Muttoni A.
10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.
Shear strength evaluation of RC bridge deck slabs according to CSCT with multi – layered shell elements and PARC_CL Crack Model
Belletti B., Scolari M., Muttoni A., Cantone R.
IABSE Conference Geneva 2015, Geneva, Switzerland, 2015, pp. 1158-1165.
Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads
Natário F., Fernández Ruiz M., Muttoni A.
fib Congress, Copenhagen, Denmark, 2015, 9 p.
Limit Analysis for Punching Shear Design of Compact Slabs and Footings
Simões J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.
fib Symposium, Copenhagen, Denmark, 2015, 13 p.
Fire Design of Concrete Structures based on a Levels-of-Approximation Approach
Fernández Ruiz M., Gómez Navarro M.., Bamonte P.
fib Symposium 2015, Copenhagen, Denmark, 2015, 9 p.
Conference Papers
2022
Validation of bond models for the crack width estimation based on detailed measurements
Corres E., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.
Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions
Corres E., Muttoni A.
Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.
Experimental investigation of dowel action using advanced measurement techniques
Pejatovic M., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.
Reports
2024
Créativité, rigueur et passion - Creativity, rigour and passion
Muttoni A., Guandalini S., Hars E., Jungwirth J., Plumey S., Vaz Rodrigues R., Spasojevic A., Redaelli D., Kostic N., Mirzaei Y., Guidotti N., Dreier D., Tassinari L., Lips S., Clément T., Campana S., Rupf M., Natário F., Einpaul J., Drakatos I.-S., Brantschen F., Backes M.-R., Niketic F., Cavagnis F., Simões J. T., Tasevski D., Valeri P, Tirassa M., Moccia F., Cantone R., Monney F., Yu Q., Pejatovic M., Malja X., Hernández Fraile D., Corres E.
IBETON, Switzerland, 2024, 178 p.
2022
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
2016
Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction
Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.
Rapport OFROU, N° 680, Switzerland, 2016, 134 p.
Theses
2024
Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns
Hernández Fraile D.
EPFL PhD Thesis, n° 10680, Lausanne, Switzerland, 2024, 282 p.
2023
Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures
Yu Q.
EPFL Thesis n° 10 159, Switzerland, 2023, 170.
2022
Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures
Monney F.
EPFL PhD Thesis, n° 8824, Lausanne, Switzerland, 2022, 184 p.
2021
The mechanics of shear failures in RC slabs based on refined measurements
Cantone R.
EPFL PhD Thesis, n° 7555, Lausanne, Switzerland, 2021, 160 p.
On the compressive and bond strength of reinforced concrete as structural properties
Moccia F.
EPFL PhD Thesis, n° 7765, Lausanne, Switzerland, 2021, 215 p.
2020
The transfer of forces through rough surface contact in concrete
Tirassa M.
EPFL PhD Thesis, n°7804, Lausanne, Switzerland, 2020, 239 p.
A Contribution to the Design of Textile Reinforced Concrete Structures
Valeri P
EPFL PhD Thesis, n°7490, Lausanne, Switzerland, 2020, 132 p.
2019
Time-dependent strength of concrete in compression and shear
Tasevski D.
EPFL PhD Thesis, n°9559, Lausanne, Switzerland, 2019, 149 p.
2018
The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement
Simões J. T.
EPFL PhD Thesis, n°8387, Lausanne, Switzerland, 2018, 223 p.
2017
Development of a consistent approach for design and assessment of structural concrete members using stress fields and strut-and-tie models
Niketic F.
EPFL PhD Thesis, n° 7911, Lausanne, Switzerland, 2017, 193 p.
Shear in reinforced concrete without transverse reinforcement: from refined experimental measurements to mechanical models
Cavagnis F.
EPFL PhD Thesis, n° 8216, Lausanne, Switzerland, 2017, 223 p.
Stress fields for the interaction of in-plane and out-of-plane forces in reinforced concrete shell elements
Backes M.-R.
Thèse EPFL, N°7474, Lausanne, Switzerland, 2017, 167 p.
2016
Influence of bond and anchorage conditions of the shear reinforcement on the punching strength of RC slabs
Brantschen F.
Thèse EPFL, n°7315, Lausanne, Suisse, 2016, 186 p. .
Seismic behaviour of slab-column connections without transverse reinforcement
Drakatos I.-S.
Lausanne, Switzerland, 2016, 196 p.
Punching Strength of Continuous Flat Slabs
Einpaul J.
EPFL PhD Thesis, n°6928, Lausanne, Switzerland, 2016, 209 p.
2015
Static and Fatigue Shear Strength of Reinforced Concrete Slabs Under Concentrated Loads Near Linear Supports
Natário F.
EPFL PhD Thesis, n° 6670, Lausanne, Switzerland, 2015, 201 p.