Publications récentes de l'IBETON
Articles de revue avec comité de lecture
2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
2023
Bond of steel reinforcement based on detailed measurements: Results and interpretations
Corres E., Muttoni A.
Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.
Flat slab response for seismic and cyclic actions prediction with numerical models
Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.
Engineering structures, 289, 2023, 19 p.
Bond deterioration of corroded reinforcements in SFRC: Experiments and 3D laser scanning
Wang X. L., Liu Y. Q., Yoo D. Y.
Cement and Concrete Composites, Vol. 137, 2023, 19 p.
Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches
Ravasini S., Vecchi F., Belletti B., Muttoni A.
Engineering Structures, 284, 2023, 18 p.
Punching tests on edge slab-column connections with refined measurements
Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.
Engineering Structures, Vol. 288, 2023, 24 p.
Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear
Yu Q., Simões J. T., Muttoni A.
Engineering Structures, 2023
2022
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Explainable ensemble learning model for predicting steel section-concrete bond strength
Wang X. L., Chen A. R., Liu Y. Q.
Construction and Building Materials, 352 (2022), 2022, 16 p.
Enhancement of the punching shear verification of slabs with openings
Borges dos Santos J., Muttoni A., Melo G. S.
Structural Concrete, 2022, pp. 1-18.
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
2021
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer
Monserrat López A., Fernández Ruiz M., Miguel Sosa P.
Engineering Structures, 2021, 17 p.
The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Fernández Ruiz M.
Engineering Structures, 231, 2021, 17 p.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
2020
A state of the art of flat-slab frame tests for gravity and lateral loading
Coronelli D., Muttoni A., Pascu I. R., Ramos A.P., Netti T.
Structural Concrete, 2020, 18 p.
A detailed view on the rebar-to-concrete interaction based on refined measurement techniques
Cantone R., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 226, 2020, 19 p.
Tensile response of textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 258, 2020, 22 p.
Concrete compressive strength: From material characterization to a structural value
Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2020, 21 p.
Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields
Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 215, 2020, 14 p.
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.
Structural Concrete, 1, 2020, 28 p.
Influence of Load Duration on Shear Strength of Reinforced Concrete Members
Tasevski D., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.
Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack
Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.
Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.
Structural Concrete, 2020, pp. 1-17.
2019
Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence
Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.
Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.
From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.
Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.
ACI Structural Journal, 116, 2019, 261-274.
Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions
Tasevski D., Fernández Ruiz M., Muttoni A.
Structural Concrete, 20, 2019, 971-985.
2018
Parametric analysis on punching shear resistance of reinforced-concrete continuous slabs
Belletti B., Muttoni A., Ravasini S., Vecchi F.
Magazine of Concrete Research, 2018, 14 p.
Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates
Tasevski D., Fernández Ruiz M., Muttoni A.
Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.
Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model
Simões J. T., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2018, pp. 191-216.
Mechanical Model for Drift-Induced Punching of Slab- Column Connections without Transverse Reinforcement
Drakatos I.-S., Muttoni A., Beyer K.
ACI Structural Journal, V. 115 No. 2, Farmington Hills, USA, 2018, pp. 463-474.
A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.
Articles de conférence avec comité de lecture
2022
Evaluation of the model uncertainty of action effects in statically indeterminate systems
Malja X., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.
A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques
Hernández Fraile D., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
2019
Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs
Belletti B., Ravasini S., Vecchi F., Muttoni A.
6th International Symposium on Life-Cycle Civil Engineering (IALCCE), Ghent, Belgium, 2019, pp. 2745-2752.
New perspectives for design of lightweight structures by using textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
fib Symposium, Krakow, Poland, 2019, 8 p.
The potential of textile reinforced concrete for design of innovative structures
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.
Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.
2018
Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions
Muttoni A., Fernández Ruiz M., Simões J. T.
fib Congress, Melbourne, Australia, 2018, 10 p.
Experimental research on Textile Reinforced Concrete for the development of design tools
Valeri P, Fernández Ruiz M., Muttoni A.
12th fib PhD Symposium, Prague, Czech Republic, 2018
Pedagogy through artisanal construction of thin-walled concrete elements: a dialogue between engineering and architecture
Valeri P, Guaita P., Baur R., Fernández Ruiz M.
IV Int. Conference on structural engineering education without borders, Madrid, Spain, 2018
Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.
Phd - Symposium, Prague, 2018
Modern experimental research techniques for a consistent understanding of aggregate interlocking
Tirassa M., Fernández Ruiz M., Muttoni A.
Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.
Design of concrete structures using structural optimization based on the stress field method
Yu Q., Muttoni A., Fernández Ruiz M.
12th fib International PhD Symposium in Civil Engineering, 2018
Articles de conférence
2022
Validation of bond models for the crack width estimation based on detailed measurements
Corres E., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.
Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions
Corres E., Muttoni A.
Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.
Experimental investigation of dowel action using advanced measurement techniques
Pejatovic M., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.
Rapport
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
Thèses
2023
Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures
Yu Q.
EPFL Thesis n° 10 159, Switzerland, 2023, 170.
2022
Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures
Monney F.
EPFL PhD Thesis, n° 8824, Lausanne, Switzerland, 2022, 184 p.
2021
The mechanics of shear failures in RC slabs based on refined measurements
Cantone R.
EPFL PhD Thesis, n° 7555, Lausanne, Switzerland, 2021, 160 p.
On the compressive and bond strength of reinforced concrete as structural properties
Moccia F.
EPFL PhD Thesis, n° 7765, Lausanne, Switzerland, 2021, 215 p.
2020
The transfer of forces through rough surface contact in concrete
Tirassa M.
EPFL PhD Thesis, n°7804, Lausanne, Switzerland, 2020, 239 p.
A Contribution to the Design of Textile Reinforced Concrete Structures
Valeri P
EPFL PhD Thesis, n°7490, Lausanne, Switzerland, 2020, 132 p.
2019
Time-dependent strength of concrete in compression and shear
Tasevski D.
EPFL PhD Thesis, n°9559, Lausanne, Switzerland, 2019, 149 p.
2018
The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement
Simões J. T.
EPFL PhD Thesis, n°8387, Lausanne, Switzerland, 2018, 223 p.