Publications de Miguel Fernández Ruiz
Articles de revue avec comité de lecture
2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
2022
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Design of slender and squat reinforced concrete members with shear reinforcement
Pejatovic M., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, 17 p.
DOI : 10.1002/suco.202200887
2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Fernández Ruiz M.
Engineering Structures, 231, 2021, 17 p.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer
Monserrat López A., Fernández Ruiz M., Miguel Sosa P.
Engineering Structures, 2021, 17 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
2020
A detailed view on the rebar-to-concrete interaction based on refined measurement techniques
Cantone R., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 226, 2020, 19 p.
Tensile response of textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 258, 2020, 22 p.
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.
Structural Concrete, 1, 2020, 28 p.
Influence of Load Duration on Shear Strength of Reinforced Concrete Members
Tasevski D., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.
Concrete compressive strength: From material characterization to a structural value
Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2020, 21 p.
Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields
Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 215, 2020, 14 p.
Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.
Structural Concrete, 2020, pp. 1-17.
Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack
Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.
2019
Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.
ACI Structural Journal, 116, 2019, 261-274.
Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions
Tasevski D., Fernández Ruiz M., Muttoni A.
Structural Concrete, 20, 2019, 971-985.
From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.
Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence
Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.
Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.
2018
Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates
Tasevski D., Fernández Ruiz M., Muttoni A.
Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.
Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model
Simões J. T., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2018, pp. 191-216.
A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.
2017
The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions
Muttoni A., Fernández Ruiz M., Simões J. T.
Structural concrete, 2017, pp. 1-17.
An analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements
Cavagnis F., Fernández Ruiz M., Muttoni A.
Structural concrete, Vol. 19, 2017, pp. 49-64.
Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement
Ribas González C. R., Fernández Ruiz M.
Structural concrete, 18, 2017, pp. 720-732.
Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures
Fernández Ruiz M., Muttoni A.
Structural concrete, 2017, pp. 1-11.
Measurements of internal cracking in punching test slabs without shear reinforcement
Einpaul J., Fernández Ruiz M., Muttoni A.
Magazine of Concrete Research, 2017, 13 p.
Response of RC panels accounting for crack development and its interaction with rebars
Hars E., Niketic F., Fernández Ruiz M.
Magazine of Concrete Research, 2017, 23 p.
2016
Performance of punching shear reinforcement under gravity loading: Influence of type and detailing
Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.
Punching shear capacity of continuous slabs
Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.
Study on Influence of Column Size and Slab Slenderness on Punching Strength
Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.
Strength of reinforced concrete footings without transverse reinforcement according to limit analysis
Simões J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 112, UK, 2016, pp. 146-161.
Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete
Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Structural Concrete, 17 No. 5, 2016, pp. 799-810.
Punching shear tests on compact footings with uniform soil pressure
Simões J. T., Bujnak J., Fernández Ruiz M., Muttoni A.
Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.
2015
Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models
Muttoni A., Fernández Ruiz M., Niketic F.
ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.
Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects
Fernández Ruiz M., Muttoni A., Sagaseta J.
Engineering structures, Vol. 99, UK, 2015, pp. 360-372.
Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement
Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.
Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.
Influence of moment redistribution and compressive membrane action on punching strength of flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 86, UK, 2015, pp. 43-57.
Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 89, 2015, pp. 191-203.
Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 103, UK, 2015, pp. 157-173.
2014
Shear Strength of Arch-Shaped Members without Transverse Reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 111, No. 1-6, USA, 2014
How simple can nonlinear finite element modelling be for structural concrete?
Argirova G., Fernández Ruiz M., Muttoni A.
Informes de la Construcción, Vol. 66, Spain, 2014, 8 p.
Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading
Micallef K., Sagaseta J., Fernández Ruiz M., Muttoni A.
International Journal of Impact Engineering, Vol. 71, 2014, pp. 17-33.
Influence of prestressing on the punching strength of post-tensioned slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Engineering structures, 2014, pp. 59-69.
On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers
Faria D. M. V., Einpaul J., Ramos A.P., Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 73, Netherlands, 2014, pp. 366-377.
Shear strength of RC slabs under concentrated loads near clamped linear supports
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 76 (2014), 2014, pp. 10-23.
Punching of flat slabs supported on rectangular columns
Sagaseta J., Tassinari L., Fernández Ruiz M., Muttoni A.
Engineering Structures, 77, 2014, pp. 17-33.
2013
Post-Punching Behavior of Flat Slabs
Fernández Ruiz M., Mirzaei Y., Muttoni A.
ACI Structural Journal, V. 110, USA, 2013, pp. 801-812.
Background to the Model Code 2010 Shear Provisions - Part II Punching Shear
Muttoni A., Fernández Ruiz M., Bentz E. C., Foster S. J., Sigrist V.
Structural Concrete, Ernst & Sohn, Vol.14, No. 3, Berlin, Germany, 2013, pp. 195-203.
Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 51, 2013, pp. 200-210.
Background to the Model Code 2010 Shear Provisions - Part I: Beams and Slabs
Sigrist V., Bentz E. C., Fernández Ruiz M., Foster S. J., Muttoni A.
Structural Concrete, Vol. 14, No 3, Berlin, Germany, 2013, pp. 204-214.
Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics
Campana S., Fernández Ruiz M., Anastasi A., Muttoni A.
Magazine of Concrete Research, Vol. 56, No. 6, UK, 2013, pp. 386-404.
Design for punching of prestressed concrete slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Structural Concrete, Vol. 14, No. 2, Lausanne, Switzerland, 2013, pp. 157-167.
Concrete shells – Towards efficient structures: Construction of an ellipsoidal concrete shell in Switzerland
Muttoni A., Lurati F., Fernández Ruiz M.
Structural Concrete, 2013
Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges
Rupf M., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 56, 2013, pp. 357-371.
2012
Effect of load distribution and variable depth on shear resistance of slender beams without stirrups
Pérez Caldentey A., Padilla P., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 109, USA, 2012, pp. 595-603.
Experimental Investigation on Punching Strength and Deformation Capacity of Shear-Reinforced Slabs
Lips S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 109, USA, 2012, pp. 889-900.
Levels-of-approximation approach in codes of practice
Muttoni A., Fernández Ruiz M.
Structural Engineering International, Vol. 2, Zurich, Switzerland, 2012, pp. 190-194.
The levels-of-approximation approach in MC 2010: application to punching shear provisions
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 13, No 1, 2012, pp. 32-41.
La teoría de la fisura crítica como base teórica para el diseño de losas frente a punzonamiento en el nuevo Código Modelo 2010 (The Critical Shear Crack Theory as a physical model for punching shear design and its implementation into new Model Code 2010)
Fernández Ruiz M., Sagaseta J., Muttoni A.
Hormigón y Acero, n° 263, Spain, 2012, pp. 49-63.
Punching shear strength of steel fibre reinforced concrete slabs
Maya Duque L. F., Fernández Ruiz M., Muttoni A., Foster S. J.
Engineering Structures, Vol. 40, UK, 2012, pp. 93-94.
2011
Authors’ closure on discussion by A. Windisch of paper “Strengthening of flat slabs against punching shear using post-installed shear reinforcement”
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, Vol. 108 N° 3, USA, 2011, pp. 382-383.
Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement
Sagaseta J., Muttoni A., Fernández Ruiz M., Tassinari L.
Magazine of Concrete Research, Vol. 63 No. 6, UK, 2011, pp. 441-457.
Authors’ closure on discussion by A. Windisch of paper “Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement”
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, Vol. 108 N° 4, 2011, pp. 505-506.
Crushing and Flexural Strength of Slab-Column Joints
Guidotti R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 33 n° 3, 2011, pp. 855-867 .
2010
Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 107, n° 5, Reston, USA, 2010, pp. 516-525.
Interaction between Bond and Deviation Forces in Spalling Failures of Arch-Shaped Members without Transverse Reinforcement
Fernández Ruiz M., Plumey S., Muttoni A.
ACI Structural Journal, V. 107, USA, 2010, pp. 346-354.
Strengthening of flat slabs against punching shear using post-installed shear reinforcement
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, V. 107 N° 4, USA, 2010, pp. 434-442.
Durchstanzen von Flachdecken bei hohen Stützenlasten
Guidotti R., Fernández Ruiz M., Muttoni A.
Beton- und Stahlbetonbau, 105, Berlin, Germany, 2010, 19-26.
2009
Discussion of paper 'Influence of Flexural Reinforcement on Shear Strength of Prestressed Concrete Beams' by E. I. Saquan and R. J. Frosch
Fernández Ruiz M., Campana S., Muttoni A.
ACI Structural Journal, Vol. 106, No. 6, Farmington Hills, USA, 2009, pp. 907-908.
Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 106 N° 4, Farmington Hills, USA, 2009, pp. 485-494.
Aplicaciones de los campos de esfuerzos cortantes en el análsis y dimensionamiento de losas de hormigón armado - Applications of shear fields for analysis and design of reinforced concrete slabs
Fernández Ruiz M., Muttoni A.
Hormigón y Acero, Vol. 60 n° 252, Spain, 2009, pp. 73-88.
Modelling techniques to capture the backbone envelope behaviour of coupling beams subjected to seismic loading
Brena S. F., Fernández Ruiz M., Kostic N., Muttoni A.
Studi e ricerche, Starrylink, Vol. 29, Brescia, 2009
2008
Shear strength of thin-webbed post-tensioned beams
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol.105, No 3, USA, 2008, pp. 308-317.
Shear strength of members without transverse reinforcement as function of critical shear crack width
Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 105, No 2, Farmington Hills, USA, 2008, pp. 163-172.
Discussion of paper 'Factors affecting strength of elements designed using strut-and-tie models'
Muttoni A., Kostic N., Fernández Ruiz M.
ACI Structural Journal, 104-S36, USA, 2008, pp. 233-235.
Nachträgliche Durchstanzbewehrung zur Verstärkung von Stahlbetonflachdecken
Muttoni A., Fernández Ruiz M., Kunz J.
Bauingenieur, Springer VDI Verlag, Vol. 83, Germany, 2008, pp. 503-511.
Shear strength of R/C bridge cantilever slabs
Vaz Rodrigues R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 30, Netherlands, 2008, pp. 3024-3033.
2007
Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges
Muttoni A., Fernández Ruiz M.
ASCE Journal of Bridge Engineering, 12, USA, 2007, pp. 646-653.
Analytical modelling of the pre- and post-yield behaviour of bond in reinforced concrete
Fernández Ruiz M., Muttoni A., Gambarova P.
ASCE Journal of Structural Engineering, Vol. 133, N° 10, Reston, USA, 2007, pp. 1364-1372.
On Development of Suitable Stress Fields for Structural Concrete
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 104, No 4, Farmington Hills, USA, 2007, pp. 495-502.
A re-evaluation of test data on bond in R/C by means of FEM modeling
Fernández Ruiz M., Muttoni A., Gambarova P.
Studi e ricerche, Starrylink, pub., V. 27, Brescia, Italy, 2007, pp. 113-134.
Relationship between nonlinear creep and cracking of concrete under uniaxial compression
Fernández Ruiz M., Muttoni A., Gambarova P.
Journal of Advanced Concrete Technology, Vol. 5, No 3, Japan, 2007, pp. 383-393.
Dimensionamiento y verificación del hormigón estructural mediante el método de los campos de tensiones
Muttoni A., Fernández Ruiz M.
Hormigón y Acero, No 243, Spain, 2007, pp. 93-102.
Article de revue
Champs de contraintes pour le béton structural
Muttoni A., Fernández Ruiz M.
Tracés, Vol. 133, n°5, Lausanne, Switzerland, 2007, pp. 17-21.
Articles de conférence avec comité de lecture
2022
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
2019
The potential of textile reinforced concrete for design of innovative structures
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.
Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.
New perspectives for design of lightweight structures by using textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
fib Symposium, Krakow, Poland, 2019, 8 p.
2018
Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions
Muttoni A., Fernández Ruiz M., Simões J. T.
fib Congress, Melbourne, Australia, 2018, 10 p.
Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.
Phd - Symposium, Prague, 2018
Experimental research on Textile Reinforced Concrete for the development of design tools
Valeri P, Fernández Ruiz M., Muttoni A.
12th fib PhD Symposium, Prague, Czech Republic, 2018
Pedagogy through artisanal construction of thin-walled concrete elements: a dialogue between engineering and architecture
Valeri P, Guaita P., Baur R., Fernández Ruiz M.
IV Int. Conference on structural engineering education without borders, Madrid, Spain, 2018
Modern experimental research techniques for a consistent understanding of aggregate interlocking
Tirassa M., Fernández Ruiz M., Muttoni A.
Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.
2017
Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression
Moccia F., Fernández Ruiz M., Muttoni A.
fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 1234–1242.
Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals
Tirassa M., Fernández Ruiz M., Anciaux G., Muttoni A.
2017 fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 740-448.
2016
Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions
Tasevski D., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.
Punching shear strength and behaviour of compact reinforced concrete footings
Simões J. T., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.
Approaches for suitable modelling and strength prediction of reinforced concrete slabs
Cantone R., Belletti B., Muttoni A., Fernández Ruiz M.
fib Symposium, Cape Town, South-Africa, 2016, pp. 21-23.
2015
Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete
Tasevski D., Fernández Ruiz M., Muttoni A.
10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.
Fire Design of Concrete Structures based on a Levels-of-Approximation Approach
Fernández Ruiz M., Gómez Navarro M.., Bamonte P.
fib Symposium 2015, Copenhagen, Denmark, 2015, 9 p.
Limit Analysis for Punching Shear Design of Compact Slabs and Footings
Simões J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.
fib Symposium, Copenhagen, Denmark, 2015, 13 p.
Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads
Natário F., Fernández Ruiz M., Muttoni A.
fib Congress, Copenhagen, Denmark, 2015, 9 p.
2014
Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)
Mata Falcón J., Fernández Ruiz M., Muttoni A.
VI Congreso ACHE, Madrid, Spain, 2014, 10 p.
Punching strength of actual two-way slabs
Muttoni A., Fernández Ruiz M., Einpaul J.
4th fib Congress, Mumbai, India, 2014, 6 p.
Strength of arch-shaped members in bending and shear
Campana S., Fernández Ruiz M., Muttoni A.
4th fib Congress, Mumbai, India, 2014, 9 p.
Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs
Backes M.-R., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 403-408.
Punching resistance and flexural behaviour of continuous flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 425-436.
2013
Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement
Rupf M., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013
Punching shear design in MC2010: incorporating new knowledge and grounding design expressions on physical models
Muttoni A., Fernández Ruiz M.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Enhanced safety with post-installed shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
2012
Punching shear strength of R/C slabs subjected to fire
Bamonte P., Fernández Ruiz M., Muttoni A.
Proceedings of the 7th International Conference on Structures in Fire - SiF2012 (Eds. M. Fontana, A. Frangi, M. Knobloch), 2012, pp. 689-698.
Influence of geometric, strain and size effects on bond in structural concrete
Muttoni A., Fernández Ruiz M.
Bond in Concrete 2012, Brescia, Italy, 2012, pp. 15-21.
2011
New provisions for punching shear in Model Code 2010 based on the Critical Shear Crack Theory
Sagaseta J., Tassinari L., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 155-158.
Behaviour and design of slab-column joints
Guidotti R., Fernández Ruiz M., Muttoni A.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 399-402.
Applications of bent-up bars as shear and integrity reinforcement in R/C slabs
Tassinari L., Lips S., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 631-634.
2010
Performance and Design of Punching-Shear Reinforcing Systems
Fernández Ruiz M., Muttoni A.
3rd fib International Congress, N° 437, Washington D.C., USA, 2010, 14 p.
Applications of Stress Fields to Assess the Behavior and Strength of Coupling Beams subjected to Seismic Actions
Brena S. F., Fernández Ruiz M., Muttoni A.
3rd fib International Congress, n° 534, Washington D.C., USA, 2010, 10 p.
Design through an incremental approach: the Swiss experience
Muttoni A., Fernández Ruiz M.
Joint IABSE-fib Conference, Dubrovnik, Croatia, 2010, 8 p.
2009
Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement
Sagaseta J., Fernández Ruiz M., Muttoni A.
fib Symposium London 2009, London, UK, 2009, 8 p.
2008
Influence of tensile properties of UHPFRC on size effect in bending
Spasojevic A., Redaelli D., Fernández Ruiz M., Muttoni A.
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 303-310.
Shear strength in one- and two-way slabs according to the critical shear crack theory
Muttoni A., Fernández Ruiz M.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
Enhanced safety with post-installed punching shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
2007
Computer-aided development of stress fields for the analysis of structural concrete
Fernández Ruiz M., Muttoni A., Burdet O.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 591-598.
Experimental investigation on the load-carrying capacity of thin webs including post-tensioning tendons
Fernández Ruiz M., Muttoni A., Hars E.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 483-490.
2018
Design of concrete structures using structural optimization based on the stress field method
Yu Q., Muttoni A., Fernández Ruiz M.
12th fib International PhD Symposium in Civil Engineering, 2018
Articles de conférence
2008
Detail design of the MPU Heavy Lifter
Ludescher H., Haugerud S. A., Fernández Ruiz M.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008, pp. 931-937.
2007
Shear strength predictions according to the critical shear crack theory and the Swiss code SIA 262 (2003)
Muttoni A., Fernández Ruiz M.
Workshop on assessment methods for determining the shear strength of existing structures, Rotterdam, Netherlands, 2007, 14 p.
Rapports
2022
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
2016
Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction
Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.
Rapport OFROU, N° 680, Switzerland, 2016, 134 p.
2009
Dimensionnement et vérification des dalles de roulement des ponts routiers
Fernández Ruiz M., Vaz Rodrigues R., Muttoni A.
Rapport OFROU, N° 636, Bern, Switzerland, 2009, 53 p.
2006
Résistance à l'effort tranchant des poutres précontraintes à âmes minces
Fernández Ruiz M., Hars E., Muttoni A.
Rapport OFROU, N° 606, Bern, Switzerland, 2006, 68 p.
Livre
2008
Poinçonnement des planchers-dalles : nouveaux acquis et applications pratiques
Muttoni A., Fernández Ruiz M., Burdet O.
Journée d'étude EPFL, 10 septembre 2008, Lausanne, Switzerland, 2008, 102 p.
Chapitres de livre avec comité de lecture
2010
Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13
Bentz E. C., Foster S. J., Fernández Ruiz M., Muttoni A., Sigrist V., Walraven J. C.
Fédération Internationale du Béton, Bulletin 56, Lausanne, Switzerland, 2010
Shear in slabs and beams: should they be treated in the same way?
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 105-128.
The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 31-60.
Chapitres de livre
2008
Exemples de renforcement contre le poinçonnement
Muttoni A., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 67-74.
Comportement mécanique des dalles et planchers-dalles en béton armé
Muttoni A., Guandalini S., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 13-28.
2007
Poinçonnement des ponts-dalles
Muttoni A., Fernández Ruiz M., Guandalini S.
Documentation SIA, 4. FBH/ASTRA Studientagung 'Neues aus der Brückenforschung', D0223, Bern, Switzerland, 2007, pp. 85-94.
Document d'enseignement
2011
Champs de contraintes et méthode des bielles et tirants - Applications dans la conception et le dimensionnement des structures en béton armé
Muttoni A., Fernández Ruiz M., Kostic N.
EPFL - IBETON, Lausanne, Switzerland, 2011, 117 p.