Publications de Miguel Fernández Ruiz

Article de revue

2007

Champs de contraintes pour le béton structural

Muttoni A., Fernández Ruiz M.

Tracés, Vol. 133, n°5, Lausanne, Switzerland, 2007, pp. 17-21.

Articles de conférence

2008

Detail design of the MPU Heavy Lifter

Ludescher H., Haugerud S. A., Fernández Ruiz M.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008, pp. 931-937.

2007

Shear strength predictions according to the critical shear crack theory and the Swiss code SIA 262 (2003)

Muttoni A., Fernández Ruiz M.

Workshop on assessment methods for determining the shear strength of existing structures, Rotterdam, Netherlands, 2007, 14 p.

Rapports

2016

Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction

Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.

Rapport OFROU, N° 680, Switzerland, 2016, pp. 134.

2009

Dimensionnement et vérification des dalles de roulement des ponts routiers

Fernández Ruiz M., Vaz Rodrigues R., Muttoni A.

Rapport OFROU, N° 636, Bern, Switzerland, 2009, 53 p.

2006

Résistance ŕ l'effort tranchant des poutres précontraintes ŕ âmes minces

Fernández Ruiz M., Hars E., Muttoni A.

Rapport OFROU, N° 606, Bern, Switzerland, 2006, 68 p.

Livre

2008

Poinçonnement des planchers-dalles : nouveaux acquis et applications pratiques

Muttoni A., Fernández Ruiz M., Burdet O.

Journée d'étude EPFL, 10 septembre 2008, Lausanne, Switzerland, 2008, 102 p.

Chapitres de livre

Comportement mécanique des dalles et planchers-dalles en béton armé

Muttoni A., Guandalini S., Fernández Ruiz M.

Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 13-28.

Exemples de renforcement contre le poinçonnement

Muttoni A., Fernández Ruiz M.

Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 67-74.

2007

Poinçonnement des ponts-dalles

Muttoni A., Fernández Ruiz M., Guandalini S.

Documentation SIA, 4. FBH/ASTRA Studientagung 'Neues aus der Brückenforschung', D0223, Bern, Switzerland, 2007, pp. 85-94.

Document d'enseignement

2011

Champs de contraintes et méthode des bielles et tirants - Applications dans la conception et le dimensionnement des structures en béton armé

Muttoni A., Fernández Ruiz M., Kostic N.

EPFL - IBETON, Lausanne, Switzerland, 2011, 117 p.

Articles de revue avec comité de lecture

2017

The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions

Muttoni A., Fernández Ruiz M., Simőes J. T.

Structural concrete, 2017, pp. 1-17.

Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures

Fernández Ruiz M., Muttoni A.

Structural concrete, 2017, pp. 1-11.

2016

Performance of punching shear reinforcement under gravity loading: Influence of type and detailing

Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.

Punching shear capacity of continuous slabs

Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.

Study on Influence of Column Size and Slab Slenderness on Punching Strength

Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.

Strength of reinforced concrete footings without transverse reinforcement according to limit analysis

Simőes J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 112, UK, 2016, pp. 146-161.

Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete

Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.

Structural Concrete, 17 No. 5, 2016, pp. 799-810.

Punching shear tests on compact footings with uniform soil pressure

Simőes J. T., Bujnak J., Fernández Ruiz M., Muttoni A.

Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.

2015

Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models

Muttoni A., Fernández Ruiz M., Niketic F.

ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.

Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects

Fernández Ruiz M., Muttoni A., Sagaseta J.

Engineering structures, Vol. 99, UK, 2015, pp. 360-372.

Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement

Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.

Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.

Influence of moment redistribution and compressive membrane action on punching strength of flat slabs

Einpaul J., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 86, UK, 2015, pp. 43-57.

Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads

Natário F., Fernández Ruiz M., Muttoni A.

Engineering structures, 89, 2015, pp. 191-203.

Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results

Cavagnis F., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 103, UK, 2015, pp. 157-173.

2014

Shear Strength of Arch-Shaped Members without Transverse Reinforcement

Campana S., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, V. 111, No. 1-6, USA, 2014

How simple can nonlinear finite element modelling be for structural concrete?

Argirova G., Fernández Ruiz M., Muttoni A.

Informes de la Construcción, Vol. 66, Spain, 2014, 8 p.

Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading

Micallef K., Sagaseta J., Fernández Ruiz M., Muttoni A.

International Journal of Impact Engineering, Vol. 71, 2014, pp. 17-33.

Influence of prestressing on the punching strength of post-tensioned slabs

Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.

Engineering structures, 2014, pp. 59-69.

On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers

Faria D. M. V., Einpaul J., Ramos A.P., Fernández Ruiz M., Muttoni A.

Construction and Building Materials, Vol. 73, Netherlands, 2014, pp. 366-377.

Shear strength of RC slabs under concentrated loads near clamped linear supports

Natário F., Fernández Ruiz M., Muttoni A.

Engineering structures, 76 (2014), 2014, pp. 10-23.

Punching of flat slabs supported on rectangular columns

Sagaseta J., Tassinari L., Fernández Ruiz M., Muttoni A.

Engineering Structures, 77, 2014, pp. 17-33.

2013

Post-Punching Behavior of Flat Slabs

Fernández Ruiz M., Mirzaei Y., Muttoni A.

ACI Structural Journal, V. 110, USA, 2013, pp. 801-812.

Background to the Model Code 2010 Shear Provisions - Part II Punching Shear

Muttoni A., Fernández Ruiz M., Bentz E. C., Foster S. J., Sigrist V.

Structural Concrete, Ernst & Sohn, Vol.14, No. 3, Berlin, Germany, 2013, pp. 195-203.

Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement

Campana S., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 51, 2013, pp. 200-210.

Design for punching of prestressed concrete slabs

Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.

Structural Concrete, Vol. 14, No. 2, Lausanne, Switzerland, 2013, pp. 157-167.

Concrete shells – Towards efficient structures: Construction of an ellipsoidal concrete shell in Switzerland

Muttoni A., Lurati F., Fernández Ruiz M.

Structural Concrete, 2013

Background to the Model Code 2010 Shear Provisions - Part I: Beams and Slabs

Sigrist V., Bentz E. C., Fernández Ruiz M., Foster S. J., Muttoni A.

Structural Concrete, Vol. 14, No. 3, Berlin, Germany, 2013, pp. 204-214.

Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges

Rupf M., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 56, 2013, pp. 357-371.

Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics

Campana S., Fernández Ruiz M., Anastasi A., Muttoni A.

Magazine of Concrete Research, Vol. 56, No. 6, UK, 2013, pp. 386-404.

2012

Effect of load distribution and variable depth on shear resistance of slender beams without stirrups

Pérez Caldentey A., Padilla P., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 109, USA, 2012, pp. 595-603.

Experimental Investigation on Punching Strength and Deformation Capacity of Shear-Reinforced Slabs

Lips S., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 109, USA, 2012, pp. 889-900.

Levels-of-approximation approach in codes of practice

Muttoni A., Fernández Ruiz M.

Structural Engineering International, 2012 Vol. 2, Zurich, Switzerland, 2012, pp. 190-194.

The levels-of-approximation approach in MC 2010: application to punching shear provisions

Muttoni A., Fernández Ruiz M.

Structural Concrete, Vol. 13, No 1, 2012, pp. 32-41.

La teoría de la fisura crítica como base teórica para el diseńo de losas frente a punzonamiento en el nuevo Código Modelo 2010 (The Critical Shear Crack Theory as a physical model for punching shear design and its implementation into new Model Code 2010)

Fernández Ruiz M., Sagaseta J., Muttoni A.

Hormigón y Acero, n° 263, Spain, 2012, pp. 49-63.

Punching shear strength of steel fibre reinforced concrete slabs

Maya Duque L. F., Fernández Ruiz M., Muttoni A., Foster S. J.

Engineering Structures, Vol. 40, UK, 2012, pp. 93-94.

2011

Authors’ closure on discussion by A. Windisch of paper “Strengthening of flat slabs against punching shear using post-installed shear reinforcement”

Fernández Ruiz M., Muttoni A., Kunz J.

ACI Structural Journal, Vol. 108 N° 3, USA, 2011, pp. 382-383.

Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement

Sagaseta J., Muttoni A., Fernández Ruiz M., Tassinari L.

Magazine of Concrete Research, Vol. 63 No. 6, UK, 2011, pp. 441-457.

Authors’ closure on discussion by A. Windisch of paper “Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement”

Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, Vol. 108 N° 4, 2011, pp. 505-506.

Crushing and Flexural Strength of Slab-Column Joints

Guidotti R., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 33 n° 3, 2011, pp. 855-867 .

2010

Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement

Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 107, n° 5, Reston, USA, 2010, pp. 516-525.

Interaction between Bond and Deviation Forces in Spalling Failures of Arch-Shaped Members without Transverse Reinforcement

Fernández Ruiz M., Plumey S., Muttoni A.

ACI Structural Journal, V. 107, USA, 2010, pp. 346-354.

Strengthening of flat slabs against punching shear using post-installed shear reinforcement

Fernández Ruiz M., Muttoni A., Kunz J.

ACI Structural Journal, V. 107 N° 4, USA, 2010, pp. 434-442.

Durchstanzen von Flachdecken bei hohen Stützenlasten

Guidotti R., Fernández Ruiz M., Muttoni A.

Beton- und Stahlbetonbau, 105, Berlin, Germany, 2010, 19-26.

2009

Discussion of paper 'Influence of Flexural Reinforcement on Shear Strength of Prestressed Concrete Beams' by E. I. Saquan and R. J. Frosch

Fernández Ruiz M., Campana S., Muttoni A.

ACI Structural Journal, Vol. 106, No. 6, Farmington Hills, USA, 2009, pp. 907-908.

Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 106 N° 4, Farmington Hills, USA, 2009, pp. 485-494.

Aplicaciones de los campos de esfuerzos cortantes en el análsis y dimensionamiento de losas de hormigón armado - Applications of shear fields for analysis and design of reinforced concrete slabs

Fernández Ruiz M., Muttoni A.

Hormigón y Acero, Vol. 60 n° 252, Spain, 2009, pp. 73-88.

Modelling techniques to capture the backbone envelope behaviour of coupling beams subjected to seismic loading

Brena S. F., Fernández Ruiz M., Kostic N., Muttoni A.

Studi e ricerche, Starrylink, Vol. 29, Brescia, 2009

2008

Shear strength of thin-webbed post-tensioned beams

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol.105, No 3, USA, 2008, pp. 308-317.

Shear strength of members without transverse reinforcement as function of critical shear crack width

Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 105, No 2, Farmington Hills, USA, 2008, pp. 163-172.

Discussion of paper 'Factors affecting strength of elements designed using strut-and-tie models'

Muttoni A., Kostic N., Fernández Ruiz M.

ACI Structural Journal, 104-S36, USA, 2008, pp. 233-235.

Nachträgliche Durchstanzbewehrung zur Verstärkung von Stahlbetonflachdecken

Muttoni A., Fernández Ruiz M., Kunz J.

Bauingenieur, Springer VDI Verlag, Vol. 83, Germany, 2008, pp. 503-511.

Shear strength of R/C bridge cantilever slabs

Vaz Rodrigues R., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 30, Netherlands, 2008, pp. 3024-3033.

2007

Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges

Muttoni A., Fernández Ruiz M.

ASCE Journal of Bridge Engineering, 12, USA, 2007, pp. 646-653.

Analytical modelling of the pre- and post-yield behaviour of bond in reinforced concrete

Fernández Ruiz M., Muttoni A., Gambarova P.

ASCE Journal of Structural Engineering, Vol. 133, N° 10, Reston, USA, 2007, pp. 1364-1372.

On Development of Suitable Stress Fields for Structural Concrete

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol.104, No4, Farmington Hills, USA, 2007, pp. 495-502.

A re-evaluation of test data on bond in R/C by means of FEM modeling

Fernández Ruiz M., Muttoni A., Gambarova P.

Studi e ricerche, Starrylink, pub., V. 27, Brescia, Italy, 2007, pp. 113-134.

Relationship between nonlinear creep and cracking of concrete under uniaxial compression

Fernández Ruiz M., Muttoni A., Gambarova P.

Journal of Advanced Concrete Technology, Vol. 5, No 3, Japan, 2007, pp. 383-393.

Dimensionamiento y verificación del hormigón estructural mediante el método de los campos de tensiones

Muttoni A., Fernández Ruiz M.

Hormigón y Acero, No 243, Spain, 2007, pp. 93-102.

Articles de conférence avec comité de lecture

2016

Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions

Tasevski D., Fernández Ruiz M., Muttoni A.

11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.

Punching shear strength and behaviour of compact reinforced concrete footings

Simőes J. T., Fernández Ruiz M., Muttoni A.

11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.

2015

Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete

Tasevski D., Fernández Ruiz M., Muttoni A.

10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.

Fire Design of Concrete Structures based on a Levels-of-Approximation Approach

Fernández Ruiz M., Gómez Navarro M.., Bamonte P.

fib Symposium 2015, Copenhagen, Denmark, 2015, 9 p.

Limit Analysis for Punching Shear Design of Compact Slabs and Footings

Simőes J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.

fib Symposium, Copenhagen, Denmark, 2015, 13 p.

Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads

Natário F., Fernández Ruiz M., Muttoni A.

fib Congress, Copenhagen, Denmark, 2015, 9 p.

2014

Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)

Mata Falcón J, Fernández Ruiz M., Muttoni A.

VI Congreso ACHE, Madrid, Spain, 2014, 10 p.

Punching resistance and flexural behaviour of continuous flat slabs

Einpaul J., Fernández Ruiz M., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 425-436.

Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs

Backes M.-R., Fernández Ruiz M., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 403-408.

Punching strength of actual two-way slabs

Muttoni A., Fernández Ruiz M., Einpaul J.

4th fib Congress, Mumbai, India, 2014, 6 p.

Strength of arch-shaped members in bending and shear

Campana S., Fernández Ruiz M., Muttoni A.

4th fib Congress, Mumbai, India, 2014, 9 p.

2013

Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement

Rupf M., Fernández Ruiz M., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013

Enhanced safety with post-installed shear reinforcement

Kunz J., Fernández Ruiz M., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

Punching shear design in MC2010: incorporating new knowledge and grounding design expressions on physical models

Muttoni A., Fernández Ruiz M.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

2012

Influence of geometric, strain and size effects on bond in structural concrete

Muttoni A., Fernández Ruiz M.

Bond in Concrete 2012, Brescia, Italy, 2012, pp. 15-21.

Punching shear strength of R/C slabs subjected to fire

Bamonte P., Fernández Ruiz M., Muttoni A.

Proceedings of the 7th International Conference on Structures in Fire - SiF2012 (Eds. M. Fontana, A. Frangi, M. Knobloch), 2012, pp. 689-698.

2011

New provisions for punching shear in Model Code 2010 based on the Critical Shear Crack Theory

Sagaseta J., Tassinari L., Muttoni A., Fernández Ruiz M.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 155-158.

Behaviour and design of slab-column joints

Guidotti R., Fernández Ruiz M., Muttoni A.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 399-402.

Applications of bent-up bars as shear and integrity reinforcement in R/C slabs

Tassinari L., Lips S., Muttoni A., Fernández Ruiz M.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 631-634.

2010

Performance and Design of Punching-Shear Reinforcing Systems

Fernández Ruiz M., Muttoni A.

3rd fib International Congress, N° 437, Washington D.C., USA, 2010, 14 p.

Applications of Stress Fields to Assess the Behavior and Strength of Coupling Beams subjected to Seismic Actions

Brena S. F., Fernández Ruiz M., Muttoni A.

3rd fib International Congress, n° 534, Washington D.C., USA, 2010, 10 p.

Design through an incremental approach: the Swiss experience

Muttoni A., Fernández Ruiz M.

Joint IABSE-fib Conference, Dubrovnik, Croatia, 2010, 8 p.

2009

Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement

Sagaseta J., Fernández Ruiz M., Muttoni A.

fib Symposium London 2009, London, UK, 2009, 8 p.

2008

Influence of tensile properties of UHPFRC on size effect in bending

Spasojevic A., Redaelli D., Fernández Ruiz M., Muttoni A.

Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 303-310.

Shear strength in one- and two-way slabs according to the critical shear crack theory

Muttoni A., Fernández Ruiz M.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008

Enhanced safety with post-installed punching shear reinforcement

Kunz J., Fernández Ruiz M., Muttoni A.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008

2007

Experimental investigation on the load-carrying capacity of thin webs including post-tensioning tendons

Fernández Ruiz M., Muttoni A., Hars E.

fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 483-490.

Computer-aided development of stress fields for the analysis of structural concrete

Fernández Ruiz M., Muttoni A., Burdet O.

fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 591-598.

Chapitres de livre avec comité de lecture

2010

Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13

Bentz E. C., Foster S. J., Fernández Ruiz M., Muttoni A., Sigrist V., Walraven J. C.

Fédération Internationale du Béton, Bulletin 56, Lausanne, Switzerland, 2010

Shear in slabs and beams: should they be treated in the same way?

Muttoni A., Fernández Ruiz M.

Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 105-128.

The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions

Muttoni A., Fernández Ruiz M.

Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 31-60.