Publications de l'IBETON

Image-based techniques to complement digital image correlation for initial and long-term characterization of cracks in reinforced concrete structures

Vincens B., Corres E., Muttoni A.

Engineering Structures, 2024

Model uncertainty in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures

Malja X., Nussbaumer A., Muttoni A.

Structural Concrete, 2024

Recalibration of partial safety factors for permanent loads

Malja X., Nussbaumer A., Muttoni A.

2024

Experimental investigation of dowel action in reinforcing bars using refined measurements

Pejatovic M., Muttoni A.

Structural Concrete, 2024

Bond of steel reinforcement based on detailed measurements: Results and interpretations

Corres E., Muttoni A.

Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.

Flat slab response for seismic and cyclic actions prediction with numerical models

Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.

Engineering structures, 289, 2023, 19 p.

Bond deterioration of corroded reinforcements in SFRC: Experiments and 3D laser scanning

Wang X. L., Liu Y. Q., Yoo D. Y.

Cement and Concrete Composites, Vol. 137, 2023, 19 p.

Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches

Ravasini S., Vecchi F., Belletti B., Muttoni A.

Engineering Structures, 284, 2023, 18 p.

Punching tests on edge slab-column connections with refined measurements

Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.

Engineering Structures, Vol. 288, 2023, 24 p.

Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear

Yu Q., Simões J. T., Muttoni A.

Engineering Structures, 2023

Design of slender and squat reinforced concrete members with shear reinforcement

Pejatovic M., Fernández Ruiz M., Muttoni A.

Structural Concrete, 2022, 17 p.

DOI : 10.1002/suco.202200887

Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression

Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.

Structural Concrete, Early view, 2022

Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members

Monney F., Fernández Ruiz M., Muttoni A.

Structural Concrete, 2022, pp. 1-33.

Explainable ensemble learning model for predicting steel section-concrete bond strength

Wang X. L., Chen A. R., Liu Y. Q.

Construction and Building Materials, 352 (2022), 2022, 16 p.

Enhancement of the punching shear verification of slabs with openings

Borges dos Santos J., Muttoni A., Melo G. S.

Structural Concrete, 2022, pp. 1-18.

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Yu Q., Fernández Ruiz M., Muttoni A.

Engineering Structures, 264, 2022, 114442.

Anchorage of shear reinforcement in beams and slabs

Monney F., Yu Q., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 265, 114340, 2022, 32 p.

Characterization of shear deformations in reinforced concrete members without shear reinforcement

Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 257, 113910, 2022, 16 p.

Shear force redistributions and resistance of slabs and wide beams

Cantone R., Fernández Ruiz M., Muttoni A.

Structural Concrete, 22, 2021, pp. 2443-2465.

A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures

Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.

Engineering Structures, 249, 2021

Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement

Monney F., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 245, 112902, 2021, 23 p.

Spalling of concrete cover induced by reinforcement

Moccia F., Fernández Ruiz M., Muttoni A.

Engineering Structures, 2021, 19 p.

The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer

Monserrat López A., Fernández Ruiz M., Miguel Sosa P.

Engineering Structures, 2021, 17 p.

The inﬂuence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete

Fernández Ruiz M.

Engineering Structures, 231, 2021, 17 p.

Casting position effects on bond performance of reinforcement bars

Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.

Structural Concrete, Wiley, 2021, 21 p.

A state of the art of flat-slab frame tests for gravity and lateral loading

Coronelli D., Muttoni A., Pascu I. R., Ramos A.P., Netti T.

Structural Concrete, 2020, 18 p.

A detailed view on the rebar-to-concrete interaction based on refined measurement techniques

Cantone R., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 226, 2020, 19 p.

Tensile response of textile reinforced concrete

Valeri P, Fernández Ruiz M., Muttoni A.

Construction and Building Materials, Vol. 258, 2020, 22 p.

Concrete compressive strength: From material characterization to a structural value

Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.

Structural Concrete, 2020, 21 p.

Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields

Valeri P, Fernández Ruiz M., Muttoni A.

Engineering Structures, 215, 2020, 14 p.

The influence of casting position and disturbance induced by reinforcement on the structural concrete strength

Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.

Structural Concrete, 1, 2020, 28 p.

Influence of Load Duration on Shear Strength of Reinforced Concrete Members

Tasevski D., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.

Notice détaillée DOI : 10.14359/51721313

Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack

Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.

Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion

Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.

Structural Concrete, 2020, pp. 1-17.

Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence

Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.

Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.

From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design

Muttoni A., Fernández Ruiz M.

Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.

Enhancing Punching Strength and Deformation Capacity of Flat Slabs

Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.

ACI Structural Journal, 116, 2019, 261-274.

Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions

Tasevski D., Fernández Ruiz M., Muttoni A.

Structural Concrete, 20, 2019, 971-985.

Parametric analysis on punching shear resistance of reinforced-concrete continuous slabs

Belletti B., Muttoni A., Ravasini S., Vecchi F.

Magazine of Concrete Research, 2018, 14 p.

Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates

Tasevski D., Fernández Ruiz M., Muttoni A.

Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.

Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model

Simões J. T., Fernández Ruiz M., Muttoni A.

Structural Concrete, 2018, pp. 191-216.

Mechanical Model for Drift-Induced Punching of Slab- Column Connections without Transverse Reinforcement

Drakatos I.-S., Muttoni A., Beyer K.

ACI Structural Journal, V. 115 No. 2, Farmington Hills, USA, 2018, pp. 463-474.

A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack

Cavagnis F., Fernández Ruiz M., Muttoni A.

Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.

Response of RC panels accounting for crack development and its interaction with rebars

Hars E., Niketic F., Fernández Ruiz M.

Magazine of Concrete Research, 2017, 23 p.

Measurements of internal cracking in punching test slabs without shear reinforcement

Einpaul J., Fernández Ruiz M., Muttoni A.

Magazine of Concrete Research, 2017, 13 p.

An analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements

Cavagnis F., Fernández Ruiz M., Muttoni A.

Structural concrete, Vol. 19, 2017, pp. 49-64.

Internal force distribution in RC slabs subjected to punching shear

Shu J., Belletti B., Muttoni A., Scolari M., Plos M.

Engineering Structures, 153 (2017), 2017, pp. 766-781.

Test and lower bound modeling of keyed shear connections in RC shear walls

Sorensen J. H., Herfelt M. A., Hoang L. C., Muttoni A.

Engineering Structures, 155 (2018), 2017, pp. 115-126.

Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement

Ribas González C. R., Fernández Ruiz M.

Structural concrete, 18, 2017, pp. 720-732.

The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions

Muttoni A., Fernández Ruiz M., Simões J. T.

Structural concrete, 2017, pp. 1-17.

Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures

Fernández Ruiz M., Muttoni A.

Structural concrete, 2017, pp. 1-11.

Internal slab-column connections under monotonic and cyclic imposed rotations

Drakatos I.-S., Muttoni A., Beyer K.

Engineering Structures, 123, 2016, pp. 501-516.

Punching shear tests on compact footings with uniform soil pressure

Simões J. T., Bujnak J., Fernández Ruiz M., Muttoni A.

Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.

Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete

Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.

Structural Concrete, 17 No. 5, 2016, pp. 799-810.

Punching shear capacity of continuous slabs

Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.

Performance of punching shear reinforcement under gravity loading: Influence of type and detailing

Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.

Strength of reinforced concrete footings without transverse reinforcement according to limit analysis

Simões J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 112, UK, 2016, pp. 146-161.

Study on Influence of Column Size and Slab Slenderness on Punching Strength

Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.

Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results

Cavagnis F., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 103, UK, 2015, pp. 157-173.

Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models

Muttoni A., Fernández Ruiz M., Niketic F.

ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.

Experimental investigation of soil - structure interaction for transition slabs of integral bridges

Burdet O., Einpaul J., Muttoni A.

Structural Concrete, 16, 2015, pp 470-479.

Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement

Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.

Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.

Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects

Fernández Ruiz M., Muttoni A., Sagaseta J.

Engineering structures, Vol. 99, UK, 2015, pp. 360-372.

Derivation of the σ-w relationship for SFRC from prism bending tests

Amin A., Foster S. J., Muttoni A.

Structural Concrete, 2015, pp. 93-105.

Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads

Natário F., Fernández Ruiz M., Muttoni A.

Engineering structures, 89, 2015, pp. 191-203.

Influence of moment redistribution and compressive membrane action on punching strength of flat slabs

Einpaul J., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 86, UK, 2015, pp. 43-57.

How simple can nonlinear finite element modelling be for structural concrete?

Argirova G., Fernández Ruiz M., Muttoni A.

Informes de la Construcción, Vol. 66, Spain, 2014, 8 p.

On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers

Faria D. M. V., Einpaul J., Ramos A.P., Fernández Ruiz M., Muttoni A.

Construction and Building Materials, Vol. 73, Netherlands, 2014, pp. 366-377.

Punching of flat slabs supported on rectangular columns

Sagaseta J., Tassinari L., Fernández Ruiz M., Muttoni A.

Engineering Structures, 77, 2014, pp. 17-33.

Shear strength of RC slabs under concentrated loads near clamped linear supports

Natário F., Fernández Ruiz M., Muttoni A.

Engineering structures, 76 (2014), 2014, pp. 10-23.

Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading

Micallef K., Sagaseta J., Fernández Ruiz M., Muttoni A.

International Journal of Impact Engineering, Vol. 71, 2014, pp. 17-33.

Shear Strength of Arch-Shaped Members without Transverse Reinforcement

Campana S., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, V. 111, No. 1-6, USA, 2014

Influence of prestressing on the punching strength of post-tensioned slabs

Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.

Engineering structures, 2014, pp. 59-69.

Post-Punching Behavior of Flat Slabs

Fernández Ruiz M., Mirzaei Y., Muttoni A.

ACI Structural Journal, V. 110, USA, 2013, pp. 801-812.

Background to the Model Code 2010 Shear Provisions - Part I: Beams and Slabs

Sigrist V., Bentz E. C., Fernández Ruiz M., Foster S. J., Muttoni A.

Structural Concrete, Vol. 14, No 3, Berlin, Germany, 2013, pp. 204-214.

Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges

Rupf M., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 56, 2013, pp. 357-371.

Background to the Model Code 2010 Shear Provisions - Part II Punching Shear

Muttoni A., Fernández Ruiz M., Bentz E. C., Foster S. J., Sigrist V.

Structural Concrete, Ernst & Sohn, Vol.14, No. 3, Berlin, Germany, 2013, pp. 195-203.

Concrete shells – Towards efficient structures: Construction of an ellipsoidal concrete shell in Switzerland

Muttoni A., Lurati F., Fernández Ruiz M.

Structural Concrete, 2013

Design for punching of prestressed concrete slabs

Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.

Structural Concrete, Vol. 14, No. 2, Lausanne, Switzerland, 2013, pp. 157-167.

Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement

Campana S., Fernández Ruiz M., Muttoni A.

Engineering Structures, Vol. 51, 2013, pp. 200-210.

Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics

Campana S., Fernández Ruiz M., Anastasi A., Muttoni A.

Magazine of Concrete Research, Vol. 56, No. 6, UK, 2013, pp. 386-404.

Experimental Investigation on Punching Strength and Deformation Capacity of Shear-Reinforced Slabs

Lips S., Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 109, USA, 2012, pp. 889-900.

Effect of load distribution and variable depth on shear resistance of slender beams without stirrups

Pérez Caldentey A., Padilla P., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 109, USA, 2012, pp. 595-603.

Levels-of-approximation approach in codes of practice

Muttoni A., Fernández Ruiz M.

Structural Engineering International, Vol. 2, Zurich, Switzerland, 2012, pp. 190-194.

Punching shear strength of steel fibre reinforced concrete slabs

Maya Duque L. F., Fernández Ruiz M., Muttoni A., Foster S. J.

Engineering Structures, Vol. 40, UK, 2012, pp. 93-94.

La teoría de la fisura crítica como base teórica para el diseño de losas frente a punzonamiento en el nuevo Código Modelo 2010 (The Critical Shear Crack Theory as a physical model for punching shear design and its implementation into new Model Code 2010)

Fernández Ruiz M., Sagaseta J., Muttoni A.

Hormigón y Acero, n° 263, Spain, 2012, pp. 49-63.

The levels-of-approximation approach in MC 2010: application to punching shear provisions

Muttoni A., Fernández Ruiz M.

Structural Concrete, Vol. 13, No 1, 2012, pp. 32-41.

Authors’ closure on discussion by A. Windisch of paper “Strengthening of flat slabs against punching shear using post-installed shear reinforcement”

Fernández Ruiz M., Muttoni A., Kunz J.

ACI Structural Journal, Vol. 108 N° 3, USA, 2011, pp. 382-383.

Authors’ closure on discussion by A. Windisch of paper “Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement”

Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, Vol. 108 N° 4, 2011, pp. 505-506.

Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement

Sagaseta J., Muttoni A., Fernández Ruiz M., Tassinari L.

Magazine of Concrete Research, Vol. 63 No. 6, UK, 2011, pp. 441-457.

Influence of aggregate fracture on shear transfer through cracks in reinforced concrete

Sagaseta J., Vollum R. L.

Magazine of Concrete Research, 63(2), London, UK, 2011, pp. 119-137.

Influence of beam cross-section, loading arrangement and aggregate type on shear strength

Sagaseta J., Vollum R. L.

Magazine of Concrete Research, London, England, 2011, pp. 139-155.

Transition Slabs of Integral Abutment Bridges

Dreier D., Burdet O., Muttoni A.

Structural Engineering International, Vol. 21 n° 2, 2011, pp. 144-150.

Crushing and Flexural Strength of Slab-Column Joints

Guidotti R., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 33 n° 3, 2011, pp. 855-867 .

Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement

Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 107, n° 5, Reston, USA, 2010, pp. 516-525.

Analytical and numerical analyses of the load-bearing capacity of retaining walls laterally supported at both ends

Plumey S., Muttoni A., Vulliet L., Labiouse V.

International Journal for numerical and analytical methods in geomechanics, 2010, 15 p.

Strengthening of flat slabs against punching shear using post-installed shear reinforcement

Fernández Ruiz M., Muttoni A., Kunz J.

ACI Structural Journal, V. 107 N° 4, USA, 2010, pp. 434-442.

Interaction between Bond and Deviation Forces in Spalling Failures of Arch-Shaped Members without Transverse Reinforcement

Fernández Ruiz M., Plumey S., Muttoni A.

ACI Structural Journal, V. 107, USA, 2010, pp. 346-354.

Durchstanzen von Flachdecken bei hohen Stützenlasten

Guidotti R., Fernández Ruiz M., Muttoni A.

Beton- und Stahlbetonbau, 105, Berlin, Germany, 2010, 19-26.

Modelling techniques to capture the backbone envelope behaviour of coupling beams subjected to seismic loading

Brena S. F., Fernández Ruiz M., Kostic N., Muttoni A.

Studi e ricerche, Starrylink, Vol. 29, Brescia, 2009

Closure of discussion on paper 'Punching Tests of Slabs with Low Reinforcement Ratios'

Guandalini S., Burdet O., Muttoni A.

ACI Structural Journal, Reston, USA, 2009, pp. 911-912.

Discussion of paper 'Influence of Flexural Reinforcement on Shear Strength of Prestressed Concrete Beams' by E. I. Saquan and R. J. Frosch

Fernández Ruiz M., Campana S., Muttoni A.

ACI Structural Journal, Vol. 106, No. 6, Farmington Hills, USA, 2009, pp. 907-908.

Aplicaciones de los campos de esfuerzos cortantes en el análsis y dimensionamiento de losas de hormigón armado - Applications of shear fields for analysis and design of reinforced concrete slabs

Fernández Ruiz M., Muttoni A.

Hormigón y Acero, Vol. 60 n° 252, Spain, 2009, pp. 73-88.

Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 106 N° 4, Farmington Hills, USA, 2009, pp. 485-494.

Punching tests of slabs with low reinforcement ratios

Guandalini S., Burdet O., Muttoni A.

ACI Structural Journal, V. 106, N°1, USA, 2009, pp. 87-95.

Nachträgliche Durchstanzbewehrung zur Verstärkung von Stahlbetonflachdecken

Muttoni A., Fernández Ruiz M., Kunz J.

Bauingenieur, Springer VDI Verlag, Vol. 83, Germany, 2008, pp. 503-511.

Shear strength of R/C bridge cantilever slabs

Vaz Rodrigues R., Fernández Ruiz M., Muttoni A.

Engineering structures, Vol. 30, Netherlands, 2008, pp. 3024-3033.

Shear strength of thin-webbed post-tensioned beams

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol.105, No 3, USA, 2008, pp. 308-317.

Discussion of paper 'Factors affecting strength of elements designed using strut-and-tie models'

Muttoni A., Kostic N., Fernández Ruiz M.

ACI Structural Journal, 104-S36, USA, 2008, pp. 233-235.

Punching shear strength of reinforced concrete slabs without transverse reinforcement

Muttoni A.

ACI Structural Journal, Excel sheet, V. 105, N° 4, USA, 2008, pp. 440-450.

Shear strength of members without transverse reinforcement as function of critical shear crack width

Muttoni A., Fernández Ruiz M.

ACI Structural Journal, V. 105, No 2, Farmington Hills, USA, 2008, pp. 163-172.

Dimensionamiento y verificación del hormigón estructural mediante el método de los campos de tensiones

Muttoni A., Fernández Ruiz M.

Hormigón y Acero, No 243, Spain, 2007, pp. 93-102.

Relationship between nonlinear creep and cracking of concrete under uniaxial compression

Fernández Ruiz M., Muttoni A., Gambarova P.

Journal of Advanced Concrete Technology, Vol. 5, No 3, Japan, 2007, pp. 383-393.

A re-evaluation of test data on bond in R/C by means of FEM modeling

Fernández Ruiz M., Muttoni A., Gambarova P.

Studi e ricerche, Starrylink, pub., V. 27, Brescia, Italy, 2007, pp. 113-134.

Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges

Muttoni A., Fernández Ruiz M.

ASCE Journal of Bridge Engineering, 12, USA, 2007, pp. 646-653.

Analytical modelling of the pre- and post-yield behaviour of bond in reinforced concrete

Fernández Ruiz M., Muttoni A., Gambarova P.

ASCE Journal of Structural Engineering, Vol. 133, N° 10, Reston, USA, 2007, pp. 1364-1372.

On Development of Suitable Stress Fields for Structural Concrete

Fernández Ruiz M., Muttoni A.

ACI Structural Journal, Vol. 104, No 4, Farmington Hills, USA, 2007, pp. 495-502.

Effect of Duct Type on the Shear Strength of Thin Webs

Muttoni A., Burdet O., Hars E.

ACI Structural Journal, Vol.103, No 5, Farmington Hills, USA, 2006, pp. 729-735.

Model Identification of Bridges Using Measurement Data

Robert-Nicoud Y., Raphael B., Burdet O., Smith I. F. C.

Computer-Aided Civil and Infrastructure Engineering, vol. 20, Malden, USA, 2005, pp. 188-131.

Influence du comportement plastique de la structure sur l'état limite ultime dans les problèmes d'interaction sol-structure

Plumey S.

Publication de la Société Suisse de la Mécanique des Sols et des Roches, 148, 2004, pp. 85-91.

Schubfestigkeit und Durchstanzen von Platten ohne Querkraftbewehrung

Muttoni A.

Beton- und Stahlbetonbau, Vol. 98, No 2, Berlin, Germany, 2003, pp. 74-84.

Brücken mit vorgespannter Stahlunterspannung

Muttoni A.

Stahlbau, Germany, 2002, pp. 592-597.

Wahl einer geeigneten Vorspannung

Favre R., Burdet O.

Beton- und Stahlbetonbau, Vol. 92 Nr 3, 1997, pp. 61-67.

Load Testing and Monitoring of Swiss Bridges

Burdet O.

CEB Bulletin d’Information, Safety and Performance Concepts, 219, Lausanne, Switzerland, 1993

Deckenverstärkung gegen Durchstanzen

Kunz J., Diggelmann M., Muttoni A.

Der Bauingenieur, n° 6, Zürich, Switzerland, 2008, pp. 1-7.

Champs de contraintes pour le béton structural

Muttoni A., Fernández Ruiz M.

Tracés, Vol. 133, n°5, Lausanne, Switzerland, 2007, pp. 17-21.

i-structures, le projet

Burdet O., Zanella J.-L.

Flash Informatique EPFL, spécial été, Lausanne, Switzerland, 2004, pp. 40-48.

Two bridges with composite prestressed tension chord

Muttoni A.

fib-CH, Structural Concrete in Switzerland, Osaka, Japan, 2002, pp. 72-75.

Punching of Prestressed Slabs - Application to Slab Bridges

Muttoni A., Burdet O., Guandalini S.

fib-CH, Swiss Contribution to the First fib Congress in Osaka, Zürich, Switzerland, 2002

Vulnérabilité sismique du bâti existant suisse

Badoux M.

IAS, Lausanne, Switzerland, 2001, pp. 222-227.

Bridges making a Difference; interview of Mr. Toni Ruttimann

Adey B., Badoux M., Brühwiler E.

Structural Engineering International, 10/1, Zürich, Switzerland, 2000

Consolidamento con jet-grouting della riva del Lago di Lugano

Grignoli G., Muttoni A., Pizzarotti E. M., Togliani G.

Quarry and Construction, n° 4, 2000

Le séisme de Kocaeli en Turquie : mission de reconnaissance

Badoux M., Studer J., Göksu E., Lestuzzi P.

IAS, Lausanne, Switzerland, 2000, 8 p.

Introduction à la problématique de la vulnérabilité sismique du bâti existant - Situation Suisse

Badoux M.

Bulletin 1999 du Pool suisse pour la couverture des dommages sismiques, Bern, Switzerland, 1999

Bewegte Berufsbilder

Muttoni A.

Schweizer Ingenieur und Architekten, 15, Switzerland, 1998, pp. 232-238.

Swissmetro: les ouvrages souterrains du tronçon pilote Genève-Lausanne

Badoux M., Wilhelm J.

Annuaire Technique de Transport en Suisse, 32, Lausanne, Switzerland, 1998, pp. 15-19.

Zur Bemessung innerer Stützenkopfverstärkungen aus Stahl

Frangi T., Tonis D., Muttoni A.

Schweizer Ingenieur und Architekt, 12, Switzerland, 1997, 4 p.

Eine gekrümmte Verbundbrücke für das Taktschiebeverfahren

Conzett J., Muttoni A.

Schweizer Ingenieur und Architekten, 26, Switzerland, 1997, pp. 544-547.

Brücken mit einem innovativen statischen System

Muttoni A.

Schweizer Ingenieur und Architekten, Nr. 26, Zürich, Switzerland, 1997, pp. 28-31.

L'art des structures; Une introduction au fonctionnement des structures en architecture

Muttoni A.

Presse Polytechnique et Universitaires Romandes, 2è édition, Lausanne, Switzerland, 2012, 270 p.

The art of structures, Introduction to the functioning of structures in architecture

Muttoni A.

EPFL Press, Lausanne, Switzerland, 2011, 286 p.

Poinçonnement des planchers-dalles : nouveaux acquis et applications pratiques

Muttoni A., Fernández Ruiz M., Burdet O.

Journée d'étude EPFL, 10 septembre 2008, Lausanne, Switzerland, 2008, 102 p.

Sécurité structurale des parkings couverts

Muttoni A.

Documentation SIA, A. Muttoni, Editor, Zürich, Switzerland, 2008, 105 p.

L'arte delle strutture

Muttoni A.

Mendrisio Academy Press, Mendrisio, Switzerland, 2006, 264 p.

Dimensionamiento y concepción de estructuras en hormigón armado mediante campos de tensiones

Muttoni A., Schwartz J., Thürlimann B.

IS-BETON, Lausanne, Switzerland, 2006, 110 p.

Dimensionnement des structures en béton - Aptitude au service et éléments de structures

Favre R., Jaccoud J.-P., Burdet O., Charif H.

Presse Polytechnique et Universitaires Romandes, Traité de Génie Civil, Vol. 8, 3è éd., Lausanne, Switzerland, 2004, 612 p.

L'art des structures; Une introduction au fonctionnement des structures en architecture

Muttoni A.

Presses Polytechnique et Universitaires Romandes, Lausanne, Switzerland, 2004, 271 p.

Design of Concrete Structures with Stress Fields

Muttoni A., Schwartz J., Thürlimann B.

Birkhäuser Verlag, Basel, Switzerland, 1997, 143 p.

Dimensionnement des structures en béton - Aptitude au service et éléments de structures

Favre R., Jaccoud J.-P., Burdet O., Charif H.

Presse Polytechnique et Universitaires Romandes, 2e édition, Traité de Génie Civil, Vol. 8, Lausanne, Switzerland, 1997, 586 p.

Bemessung von Betontragwerken mit Spannungsfeldern

Muttoni A., Schwartz J., Thürlimann B.

Birkhäuser Verlag, Basel, Switzerland, 1997, 145 p.

Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13

Bentz E. C., Foster S. J., Fernández Ruiz M., Muttoni A., Sigrist V., Walraven J. C.

Fédération Internationale du Béton, Bulletin 56, Lausanne, Switzerland, 2010

The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions

Muttoni A., Fernández Ruiz M.

Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 31-60.

Shear in slabs and beams: should they be treated in the same way?

Muttoni A., Fernández Ruiz M.

Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 105-128.

Exemples de renforcement contre le poinçonnement

Muttoni A., Fernández Ruiz M.

Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 67-74.

Analyse structurale et évaluation

Guandalini S., Muttoni A.

Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 45-62.

Comportement mécanique des dalles et planchers-dalles en béton armé

Muttoni A., Guandalini S., Fernández Ruiz M.

Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 13-28.

Tragsicherheit von Einstellhallen

Muttoni A.

Dokumentation SIA, D0 226, Zürich, Switzerland, 2008, 105 p.

Poinçonnement des ponts-dalles

Muttoni A., Fernández Ruiz M., Guandalini S.

Documentation SIA, 4. FBH/ASTRA Studientagung 'Neues aus der Brückenforschung', D0223, Bern, Switzerland, 2007, pp. 85-94.

Erdbebenbemessung

Badoux M., Lestuzzi P., Vogt R.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 79-89.

Durchstanzen

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-65.

Bauteile ohne Querkraftbewehrung

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.

Einleitung in die Norm SIA 262

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.

Druckglieder

Schertenleib P., Muttoni A., Schwartz J.

Documentation SIA, D 0182 Einführung in die Norm SIA 262, Zürich, Switzerland, 2003, pp. 67-77.

Poinçonnement

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-66.

Eléments sans armature d'effort tranchant

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.

Introduction à la norme SIA 262

Muttoni A.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.

Pièces comprimées

Schertenleib P., Muttoni A., Schwartz J.

Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 67-77.

Dimensionnement parasismique

Badoux M., Lestuzzi P., Vogt R.

Documentation SIA, D 0182, Zürich, Switzerland, 2003, pp. 79-89.

Gebrauchstauglichkeit

Burdet O., Kenel A.

Documentation SIA, D 0182 (Deutsch), Zürich, Switzerland, 2003, pp. 105-118.

Aptitude au service

Burdet O., Kenel A.

Documentation SIA, D 0182, Zürich, Switzerland, 2003, pp. 107-120.

Ponts avec un système statique innovant

Muttoni A.

SIA D 0160, Progrès dans la conception des ouvrages en béton, Zürich, Switzerland, 1999, pp. 33-36.

Plastizitätstheorie im Betonbau

Muttoni A., Schwartz J.

Ernst & Sohn, Der Ingenieurbau: Grundwissen in 9 Bändern (Hrsg. G. Mehlhorn), Bemessung, Berlin, Germany, 1998, pp. 333-366.

Kahn L. I. : The Construction of the Kimbell Art Museum, An Analysis of the structure

Muttoni A.

I cataloghi dell’Accademia di Architettura, Skyra editore, Milan, Italy, 1997, pp. 104-111.

Evaluation of the model uncertainty of action effects in statically indeterminate systems

Malja X., Muttoni A.

14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.

A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques

Hernández Fraile D., Muttoni A.

14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022

Punching of edge columns with and without shear reinforcement: an experimental investigation

Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.

fib International Congress 2022 Oslo, Oslo, Norway, 2022

A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections

Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.

fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021

Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs

Belletti B., Ravasini S., Vecchi F., Muttoni A.

6th International Symposium on Life-Cycle Civil Engineering (IALCCE), Ghent, Belgium, 2019, pp. 2745-2752.

New perspectives for design of lightweight structures by using textile reinforced concrete

Valeri P, Fernández Ruiz M., Muttoni A.

fib Symposium, Krakow, Poland, 2019, 8 p.

The potential of textile reinforced concrete for design of innovative structures

Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.

Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.

Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions

Muttoni A., Fernández Ruiz M., Simões J. T.

fib Congress, Melbourne, Australia, 2018, 10 p.

Experimental research on Textile Reinforced Concrete for the development of design tools

Valeri P, Fernández Ruiz M., Muttoni A.

12th fib PhD Symposium, Prague, Czech Republic, 2018

Pedagogy through artisanal construction of thin-walled concrete elements: a dialogue between engineering and architecture

Valeri P, Guaita P., Baur R., Fernández Ruiz M.

IV Int. Conference on structural engineering education without borders, Madrid, Spain, 2018

Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs

Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.

Phd - Symposium, Prague, 2018

Modern experimental research techniques for a consistent understanding of aggregate interlocking

Tirassa M., Fernández Ruiz M., Muttoni A.

Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.

Design of concrete structures using structural optimization based on the stress field method

Yu Q., Muttoni A., Fernández Ruiz M.

12th fib International PhD Symposium in Civil Engineering, 2018

Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression

Moccia F., Fernández Ruiz M., Muttoni A.

fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 1234–1242.

Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals

Tirassa M., Fernández Ruiz M., Anciaux G., Muttoni A.

2017 fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 740-448.

Analytical model for slab-column connections subjected to cyclically increasing drifts

Drakatos I.-S., Beyer K., Muttoni A.

16th World Conference on Earthquake Engineering, Santiago, Chile, 2017

Approaches for suitable modelling and strength prediction of reinforced concrete slabs

Cantone R., Belletti B., Muttoni A., Fernández Ruiz M.

fib Symposium, Cape Town, South-Africa, 2016, pp. 21-23.

Compressive membrane action effects on punching strength of flat RC slabs

Cantone R., Belletti B., Manelli L., Muttoni A.

Key Engineering Materials, 8th International Conference on Concrete under Severe Conditions - Environment and Loading, CONSEC 2016, Vol. 711, Lecco, Italy, 2016, pp. 698-705.

Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions

Tasevski D., Fernández Ruiz M., Muttoni A.

11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.

Punching shear strength and behaviour of compact reinforced concrete footings

Simões J. T., Fernández Ruiz M., Muttoni A.

11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.

Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete

Tasevski D., Fernández Ruiz M., Muttoni A.

10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.

Shear strength evaluation of RC bridge deck slabs according to CSCT with multi – layered shell elements and PARC_CL Crack Model

Belletti B., Scolari M., Muttoni A., Cantone R.

IABSE Conference Geneva 2015, Geneva, Switzerland, 2015, pp. 1158-1165.

Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads

Natário F., Fernández Ruiz M., Muttoni A.

fib Congress, Copenhagen, Denmark, 2015, 9 p.

Limit Analysis for Punching Shear Design of Compact Slabs and Footings

Simões J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.

fib Symposium, Copenhagen, Denmark, 2015, 13 p.

Fire Design of Concrete Structures based on a Levels-of-Approximation Approach

Fernández Ruiz M., Gómez Navarro M.., Bamonte P.

fib Symposium 2015, Copenhagen, Denmark, 2015, 9 p.

Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)

Mata Falcón J., Fernández Ruiz M., Muttoni A.

VI Congreso ACHE, Madrid, Spain, 2014, 10 p.

Some innovative prestressed concrete structures in Switzerland

Muttoni A.

Keynote lecture at the 23rd Symposium on Developments in Prestressed Concrete, Japan Prestressed Concrete Institute, Morioka, Japan, 2014, 12 p.

Punching resistance and flexural behaviour of continuous flat slabs

Einpaul J., Fernández Ruiz M., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 425-436.

Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs

Backes M.-R., Fernández Ruiz M., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 403-408.

Experimental investigation on seismic behaviour of slab-column connections

Drakatos I.-S., Beyer K., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, 2014, pp. 255-261.

Static and fatigue strength of RC slabs under concentrated loads near linear supports

Natário F., Muttoni A.

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 449-454.

Strength of arch-shaped members in bending and shear

Campana S., Fernández Ruiz M., Muttoni A.

4th fib Congress, Mumbai, India, 2014, 9 p.

Mechanical Model for flexural behaviour of slab-column connections under seismically induced deformations

Drakatos I.-S., Muttoni A., Beyer K.

4th fib Congress, Mumbai, India, 2014, 8 p.

Punching strength of actual two-way slabs

Muttoni A., Fernández Ruiz M., Einpaul J.

4th fib Congress, Mumbai, India, 2014, 6 p.

An experimental investigation into the tensile strength of steel fibre reinforced concrete

Amin A., Foster S. J., Boillet D., Muttoni A.

Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM22, Australia, 2013, pp. 1097-1103.

Evaluation of the tensile strength of SFRC as derived from inverse analysis of notched bending tests

Amin A., Foster S. J., Muttoni A.

VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-8, Toledo, Spain, 2013, 9 p.

Influence of punching shear reinforcement on the flexural response of flat slabs

Lips S., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

Punching shear design in MC2010: incorporating new knowledge and grounding design expressions on physical models

Muttoni A., Fernández Ruiz M.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

Enhanced safety with post-installed shear reinforcement

Kunz J., Fernández Ruiz M., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

Failure analysis of edge flat-slab column connections with shear reinforcement

Bompa D. V., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.

Punching shear strength of PC Slabs

Clément T., Muttoni A., Sagaseta J.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013

Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement

Rupf M., Fernández Ruiz M., Muttoni A.

fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013

Punching shear strength of R/C slabs subjected to fire

Bamonte P., Fernández Ruiz M., Muttoni A.

Proceedings of the 7th International Conference on Structures in Fire - SiF2012 (Eds. M. Fontana, A. Frangi, M. Knobloch), 2012, pp. 689-698.

Influence of geometric, strain and size effects on bond in structural concrete

Muttoni A., Fernández Ruiz M.

Bond in Concrete 2012, Brescia, Italy, 2012, pp. 15-21.

Applications of bent-up bars as shear and integrity reinforcement in R/C slabs

Tassinari L., Lips S., Muttoni A., Fernández Ruiz M.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 631-634.

Behaviour and design of slab-column joints

Guidotti R., Fernández Ruiz M., Muttoni A.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 399-402.

New provisions for punching shear in Model Code 2010 based on the Critical Shear Crack Theory

Sagaseta J., Tassinari L., Muttoni A., Fernández Ruiz M.

fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 155-158.

Thermal effects in the Long-Term Monitoring of Bridges

Burdet O.

IABSE Symposium on Large structures and Infrastructures for environmentally constrained and urbanised areas, A-755, Venice, Italy, 2010, 7 p.

Influence of a Prestressing Eccentricity on the Punching Shear Strength of Post-Tensioned Slab Bridges

Clément T., Muttoni A.

Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 63-68.

Analysis and design of an innovative solution for tunnels using elastic-plastic stress fields

Campana S., Muttoni A.

Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 75-80.

Experimental investigation of reinforced concrete slabs with punching shear reinforcement

Lips S., Muttoni A.

Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 105-110.

Design through an incremental approach: the Swiss experience

Muttoni A., Fernández Ruiz M.

Joint IABSE-fib Conference, Dubrovnik, Croatia, 2010, 8 p.

Applications of Stress Fields to Assess the Behavior and Strength of Coupling Beams subjected to Seismic Actions

Brena S. F., Fernández Ruiz M., Muttoni A.

3rd fib International Congress, n° 534, Washington D.C., USA, 2010, 10 p.

Performance and Design of Punching-Shear Reinforcing Systems

Fernández Ruiz M., Muttoni A.

3rd fib International Congress, N° 437, Washington D.C., USA, 2010, 14 p.

Experience in the Long-Term Monitoring of Bridges

Burdet O.

3rd fib International Congress, N° 663, Washington D.C., USA, 2010, pp. 108-113.

Unified formulation for Reissner-Mindlin plates: a comparison with numerical results

Tassinari L., Monleón S., Gentilini C.

IASS Symposium 2009, Valencia, Spain, Valencia, Spain, 2009, 2759-2770.

Thin UHPFRC slabs without conventional reinforcement as light-weight structural elements

Spasojevic A., Redaelli D., Muttoni A.

fib Symposium London 2009, London, UK, 2009, 8 p.

Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement

Sagaseta J., Fernández Ruiz M., Muttoni A.

fib Symposium London 2009, London, UK, 2009, 8 p.

Enhanced safety with post-installed punching shear reinforcement

Kunz J., Fernández Ruiz M., Muttoni A.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008

Shear strength in one- and two-way slabs according to the critical shear crack theory

Muttoni A., Fernández Ruiz M.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008

Influence of tensile properties of UHPFRC on size effect in bending

Spasojevic A., Redaelli D., Fernández Ruiz M., Muttoni A.

Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 303-310.

Influence of soil-structure interaction on structural behaviour of integral bridge piers

Dreier D.

Proceedings of the 7th International FIB PhD Symposium, Stuttgart, Germany, 2008, pp. 11-20.

Computer-aided development of stress fields for the analysis of structural concrete

Fernández Ruiz M., Muttoni A., Burdet O.

fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 591-598.

Tensile Behaviour of reinforced ultra-high performance fiber reinforced concrete elements

Redaelli D., Muttoni A.

fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 267-274.

Experimental investigation on the load-carrying capacity of thin webs including post-tensioning tendons

Fernández Ruiz M., Muttoni A., Hars E.

fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 483-490.

Possibilites for Structural Improvements in the Design of Concrete Bridges

Spasojevic A.

Proceedings of the 6th Int. PhD Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 8 p.

Considérations sur l'interaction sol-structure dans le domaine des tranchées couvertes

Plumey S., Muttoni A.

fib-CH, Construction en béton en Suisse . The second fib-congress, June 5-8, 2006, Naples, Italy, Zürich, Switzerland, 2006, pp. 24-28.

Considerations on the design of cut-and-cover tunnels

Plumey S., Muttoni A., Vulliet L., Labiouse V.

ELU-ULS 2006 - Symposium international sur les états limites ultimes des ouvrages géotechniques, Marne-la-Vallée, France, 2006, pp. 379-386.

Computer-Based Development of Stress Fields

Kostic N.

Proceedings of the 6th Int. PhD Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 7 p.

Testing of reinforced high performance fibre concrete members in tension

Redaelli D.

Proceedings of the 6th Int. Ph.D. Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 8 p.

Shear Strength of RC Bridge Deck Cantilevers

Vaz Rodrigues R.

6th International PhD Symposium in Civil Engineering, IBK Publikation SP-015, 2006, pp. 160-161.

Large Scale Tests on Bridge Slabs Cantilevers Subjected to Traffic Loads

Vaz Rodrigues R., Muttoni A., Burdet O.

Proceedings of the 2nd fib Congress, vol.1, Naples, 2006, 232 p.

Experimental investigation of the shear capacity of plastic hinges

Vaz Rodrigues R., Burdet O., Muttoni A.

fib Symposium, Budapest 2005, vol. 2, Budapest, Hungary, 2005, pp. 651-656.

Plasticity in soil-structure interaction applied to cut-and-cover tunnels

Plumey S., Muttoni A., Vulliet L., Labiouse V.

5th International PhD Symposium in civil engineering, 2, Delft, Netherlands, 2004, pp. 989-995.

FRC in Switzerland : research, applications and perspectives

Cadoni E., Teruzzi T., Muttoni A., Suter R., Brühwiler E.

International Workshop on Advanced Fiber Reinforced Concrete, Bergamo, Italy, 2004

Structural Behavior of Tension Members in Ultra High Performance Concrete

Jungwirth J., Muttoni A.

International Symposium on Ultra High Performance Concrete, Kassel, 2004

Innovationen im Brückenbau am Beispiel der unterspannten Tragwerke

Muttoni A.

Internationales Brückenbausymposium, Aktuelle Entwicklungen im Brückenbau, Darmstadt, Germany, 2003, 12 p.

Decision Framework for Seismic Risk Management

Pellissier V., Badoux M.

12 th European Conference on Earthquake Engineering, London, UK, 2002, 10 p.

Underspanned Bridge Structures in Reactive Powder Concrete (RPC)

Jungwirth J., Muttoni A.

4th International PhD Symposium in Civil Engineering, Munich, Germany, 2002

Transposing multimedia into a virtual course

Burdet O., Laffranchi M.

4th International Conference on New Educational Environments, Lugano, Switzerland, 2002, pp. 1.3/11-14.

Long-Term Evaluation vs Short-Term Measurements : the Case of the Riddes Bridges

Burdet O., Zanella J.-L.

fib, Fib Congress 2002, Osaka, Osaka, Japan, 2002

Automatic Monitoring of the Riddes Bridges using Electronic Inclinometers

Burdet O., Zanella J.-L.

IABMAS, First International Conference on Bridge Maintenance, Safety and Management, Barcelona, Spain, 2002

The Lake Lugano Crossing-Technical Solutions

Haugerud S. A., Olsen T. O., Muttoni A.

Swets& Zeitlinger B. V., Lisse, the Netherlands, Strait Crossings 2001, Krokeborg ed, Lisse, Netherlands, 2001, pp. 563-597.

A crossing Proposal for the Lake Lugano for the new AlpTransit Railway across the Alps

Muttoni A., Haugerud S. A., Olsen T. O.

Swets & Zeitlinger B. V., Lisse, the Netherlands, Strait Crossing 2001, Krokebord ed, Lisse, Netherlands, 2001, pp. 575-579.

Seismic Vulnerability of Traditional Masonry Buildings in Switzerland

Peter B. K., Badoux M.

20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001

Damage Prediction for Buildings with Reinforced Concrete Shear Walls

Peter B. K., Badoux M.

20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001

Methodology for Comparing Strategies in Seismic Risk Management of Existing Building Population

Pellissier V., Badoux M.

20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001

Seismic vulnerability of older swiss reinforced concrete buildings

Badoux M., Peter B. K.

Paper No 566, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 2000

Automatic Monitoring of Bridges using Electronic Inclinometers

Burdet O., Zanella J.-L.

IABSE, , Lucerne Congress Structural Engineering for Meeting Urban Transportation Challenges, Zürich, Switzerland, 2000, pp. 398-399.

Comparison of Internal and External Prestressing for Typical Highway Bridges

Burdet O., Badoux M.

IABSE, 16th Congress, Lucerne, Switzerland, 2000

Punching Strength of R.C. Flat Slabs with Moment Transfer

Krueger G., Burdet O.

International Workshop on Punching Shear, Stockholm, Sweden, 2000

Amount of Prestressing Based on Serviceability Requirements

Favre R., Burdet O.

IABSE Rio 1999, Zürich, Switzerland, 1999, pp. 594-601.

Comparison of the amount of reinforcement for a box-girder bridge prestressed with Internal or extenal cables

Badoux M., Burdet O., Benouaich D.

fib Symposium Prague 1999, Prague, Czech Republic, 1999

Long-term deflection monitoring of prestressed concrete bridges retrofitted by external post-tensioning - examples from Switzerland

Burdet O., Badoux M.

IABSE Rio 1999, Rio de Janeiro, Brazil, 1999

Automatic Deflection and Temperature Monitoring of a Balanced Cantilever Concrete Bridge

Burdet O.

5th International Conference of Short and Medium Span Bridges, Calgary, Canada, 1998

Vertical Displacement of Bridges Using the SOFO System: a Fiber Optic Monitoring Method for Structures

Perregaux N., Vurpillot S., Tosco J.-S., Inaudi D., Burdet O.

ASCE-12th Engineering Mechanics Conference Procedings: A force for the 21st Century, San Diego, USA, 1998, pp. 791-794.

Concrete tie model for the flexural behavior of RC and PC sections

Rossier S., Burdet O., Favre R.

2nd International PhD Symposium in Civil Engineering, Budapest, Hungary, 1998

Punching Tests on RC Flat Slabs with Eccentric Loading

Krueger G., Burdet O., Favre R.

Proceedings of the 2nd Int. Ph.D. Symposium in Civil Engineering, Budapest 1998, Budapest, Hungary, 1998, pp. 1-8.

Dynamic load testing of Swiss bridges

Burdet O., Corthay S.

IABSE Symposium San Francisco, Extending the lifespan of structures, 73/2, Lausanne, Switzerland, 1995, pp. 1123-1128.

Static and Dynamic Load Testing of Swiss Bridges

Burdet O., Corthay S.

International Bridge Conference Warsaw'94, Varsovie, Poland, 1994

Statistical Data Combined with Linear and Non-Linear Analysis to Interpret Bridge Load Tests

Favre R., Hassan M., Burdet O.

4th International Conference on Short and Medium Span Bridges, Halifax, Canada, 1994, pp. 1197-1208.

Critères pour le choix d'une précontrainte : Application au cas d'un renforcement

Favre R., Burdet O., Charif H.

Colloque international "Gestion des ouvrages d'art", Paris, France, 1994

Interpretation of 200 Load Tests of Swiss Bridges

Hassan M., Burdet O., Favre R.

IABSE Colloquium, Remaining Structural Capacity, Copenhagen, Denmark, 1993, pp. 319-326.

Combination of Ultrasonic Measurements and Load Tests in Bridge Evaluation

Hassan M., Burdet O., Favre R.

Structural Faults + Repair, Edinburgh, UK, 1993

Models and Tests of Anchorage Zones of Post-Tensioning Tendons

Burdet O., Sanders D. H., Roberts-Wollmann C. L., Breen J. E., Fenves G. L.

IABSE Stuttgart 91, Stuttgart, Germany, 1991, pp. 545-550.

Behavior of Beams and Punching in Slabs without Shear Reinforcement

Muttoni A., Schwartz J.

IABSE Colloquium, Vol. 62, Stuttgart, Germany, 1991, pp. 703-708.

Zur Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton

Muttoni A.

Deutscher Ausschuss für Stahlbeton, Forschungskolloquium, Berlin, Germany, 1990, pp. 1-6.

Validation of bond models for the crack width estimation based on detailed measurements

Corres E., Muttoni A.

14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.

Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions

Corres E., Muttoni A.

Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.

Experimental investigation of dowel action using advanced measurement techniques

Pejatovic M., Muttoni A.

14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.

Verification of details of existing structures with the elastic-plastic stress field method

Argirova G., Muttoni A.

9th fib International PhD Symposium in Civil Engineering, Vol. 1, Karlsruhe, Germany, 2012, pp. 153-158.

Behaviour and strength of existing bridges with low amount of shear reinforcement

Rupf M., Muttoni A.

Proceedings of the 9th fib International PhD Symposium in Civil Engineering, Karlsruhe, Germany, 2012, pp. 23-28.

Quasi-static cyclic tests of two prefabricated, reinforced masonry walls

Braun B., Rupf M., Beyer K., Dazio A.

14th European Conference on Earthquake Engineering, Ohrid, Macedonia, 2010, 8 p.

Test campaign on the influence of a prestessing eccentricity on the punching shear strength of post tensioned slab-bridges

Clément T., Muttoni A.

1st EPFL Doctoral Conference in Mechanics, Lausanne, Switzerland, 2010, 97.

Modified Geometry of Transition Slabs for Integral Bridges

Dreier D.

Proceedings of the 1st EPFL Doctoral Conference in Mechanics, Advances in Modern Aspects of Mechanics, Lausanne, Switzerland, 2010, pp. 107-110.

Quasi-statisch zyklische Versuche an vorfabrizierten, bewehrten Mauerwerkswänden

Rupf M., Braun B., Beyer K., Dazio A.

SIA D0231 - Erdbeben und Mauerwerk, Zurich, Suisse, 2009, 8 p.

Detail design of the MPU Heavy Lifter

Ludescher H., Haugerud S. A., Fernández Ruiz M.

fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008, pp. 931-937.

Post punching behaviour of reinforced concrete slab-column connections

Mirzaei Y.

7th International FIB PhD Symposium, Stuttgart, Germany, 2008, 8 p.

Shear strength predictions according to the critical shear crack theory and the Swiss code SIA 262 (2003)

Muttoni A., Fernández Ruiz M.

Workshop on assessment methods for determining the shear strength of existing structures, Rotterdam, Netherlands, 2007, 14 p.

Crossing the Lugano Lake for the AlpTransit line; Submerged Floating Tunnels

Muttoni A.

Lecco, Italy, 2000

Verbundstützen und Deckenanschlüsse

Muttoni A.

SIA D 0160, Les structures mixtes acier-béton, Eurocode 4, Dimensionnement, Réalisations, Zürich, Switzerland, 1996

Champs de contraintes et méthode des bielles et tirants - Applications dans la conception et le dimensionnement des structures en béton armé

Muttoni A., Fernández Ruiz M., Kostic N.

EPFL - IBETON, Lausanne, Switzerland, 2011, 117 p.

Conception et dimensionnement des éléments de structures, béton armé

Muttoni A., Burdet O.

EPFL - IS-BETON, Polycopié cours 5ème semestre, Lausanne, Switzerland, 2004

Strutture - un'introduzione al funzionamento delle strutture portanti in archittectura

Muttoni A.

Accademia di architettura, Lugano, Switzerland, 1998, 167 p.

Créativité, rigueur et passion - Creativity, rigour and passion

Muttoni A., Guandalini S., Hars E., Jungwirth J., Plumey S., Vaz Rodrigues R., Spasojevic A., Redaelli D., Kostic N., Mirzaei Y., Guidotti N., Dreier D., Tassinari L., Lips S., Clément T., Campana S., Rupf M., Natário F., Einpaul J., Drakatos I.-S., Brantschen F., Backes M.-R., Niketic F., Cavagnis F., Simões J. T., Tasevski D., Valeri P, Tirassa M., Moccia F., Cantone R., Monney F., Yu Q., Pejatovic M., Malja X., Hernández Fraile D., Corres E.

IBETON, Switzerland, 2024, 178 p.

Contribution to the updating of detailing rules for concrete structures

Muttoni A., Fernández Ruiz M., Moccia F., Monney F.

Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.

Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction

Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.

Rapport OFROU, NÂ° 680, Switzerland, 2016, 134 p.

Poinçonnement des ponts-dalles précontraints

Clément T.

Vereinigung Schweizerischer Strassenfachleute (VSS), 653, Suisse, 2013, 79 p.

Experimental verification of integral bridge abutments

Muttoni A., Dumont A.-G., Burdet O., Savvilotidou M., Einpaul J., Nguyen M. L.

Rapport OFROU, Switzerland, 2013, 86 p.

Interaction sol-structure : Ponts à culées intégrales

Dreier D., Muttoni A.

Rapport OFROU, N° 646, Bern, Switzerland, 2010, 99 p.

Dimensionnement et vérification des dalles de roulement des ponts routiers

Fernández Ruiz M., Vaz Rodrigues R., Muttoni A.

Rapport OFROU, N° 636, Bern, Switzerland, 2009, 53 p.

Applications structurales du béton fibré à hautes performances aux ponts

Spasojevic A., Burdet O., Muttoni A.

Rapport OFROU, Zürich, Switzerland, 2008, 59 p.

Evaluation des systèmes existants pour le suivi à long terme des déformations des ponts

Burdet O., Muttoni A.

Office fédéral des routes, N° 607, Bern, Switzerland, 2006, 57 p.

Résistance à l'effort tranchant des poutres précontraintes à âmes minces

Fernández Ruiz M., Hars E., Muttoni A.

Rapport OFROU, N° 606, Bern, Switzerland, 2006, 68 p.

Commento sul punzonamento secondo norma SIA 262

Muttoni A., Guandalini S.

Switzerland, 2006, 14 p.

Kommentar zum Durchstanzen nach SIA 262

Muttoni A., Guandalini S.

Lausanne, Switzerland, 2006, 14 p.

Deckeneinsturz der Tiefgarage am Staldenacker in Gretzenbach

Muttoni A., Fürst A., Hunkeler F.

Medieninformation vom 15.11.2005, Solothurn, Switzerland, 2005, 14 p.

Inventaire simsique de la ville d'Aigle

Brennet G., Peter B. K., Badoux M.

IS-BETON, Lausanne, Switzerland, 2002

Etanchéité à l'air et durabilité du béton armé sous vide partiel, projet SwissMetro

Badoux M., Fellay N.

Lausanne, Switzerland, 2001, 167 p.

Précontrainte extérieure des ponts

Benouaich D., Badoux M., Burdet O.

Rapport OFROU, Mandat de recherche 94/98, VSS, 545, Zürich, Switzerland, 2000, 81 p.

Influence de la rigidité des colonnes sur la résistance au poinçonnement

Krueger G., Burdet O., Favre R.

Rapport des essais IBAP - DGC - EPFL, No. 147, Lausanne, Switzerland, 1999, 107 p.

Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires 1ère partie, Caractérisation thermique et mécanique de différentes formulations de bétons au moyen d'essais en laboratoire

Badoux M., Jaccoud J.-P., Fleury B.

IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 36 p.

Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires, 1ère partie (complément), caractérisation thermique et mécanique de différentes formulations de bétons au moyen d'essais en laboratoire

Badoux M., Jaccoud J.-P., Fleury B.

IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 34 p.

Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires, 2ème partie, Modélisation du comportement thermique et mécanique de la tranchée couverte de Champ Baly

Badoux M., Jaccoud J.-P., Fleury B.

IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 63 p.

Beurteilung von Massivbrücken aufgrund von Belastungsversuchen und Langzeitbeobachtungen Empfehlung für die Vorspannung

Favre R., Burdet O.

Office fédéral des routes, 522, 1996

Enseignements tirés d'essais de charge et d'observations à long terme pour l'évaluation des ponts en béton et le choix de la précontrainte

Favre R., Burdet O., Charif H., Hassan M., Markey I. F.

Rapport OFR, Lausanne, Switzerland, 1995

Punching Shear, Draft Code Proposal

Muttoni A.

SIA Draft, SIA 162 / AG 5, Swiss Federal Institute of Technology - Zurich 1985, rév. 1988, Zürich, Switzerland, 1988, 14 p.

Durchstanzversuche an Flachdecken mit Aussparungen

Mueller F. X., Muttoni A., Thürlimann B.

IBK - Bericht (ETHZ), Institut für Baustatik und Konstruktion der ETH Zürich, Birkhäuser Verlag, 7305-5, Zürich, Switzerland, 1984, 118 p.

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Hernández Fraile D.

EPFL PhD Thesis, n° 10680, Lausanne, Switzerland, 2024, 282 p.

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Malja X.

Thesis dissertation, Switzerland, 2024

Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications

Corres E.

PhD Thesis, EPFL, No 10772, 2024, 205 p.

Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures

Yu Q.

EPFL Thesis n° 10 159, Switzerland, 2023, 170.

Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures

Monney F.

EPFL PhD Thesis, n° 8824, Lausanne, Switzerland, 2022, 184 p.

The mechanics of shear failures in RC slabs based on refined measurements

Cantone R.

EPFL PhD Thesis, n° 7555, Lausanne, Switzerland, 2021, 160 p.

On the compressive and bond strength of reinforced concrete as structural properties

Moccia F.

EPFL PhD Thesis, n° 7765, Lausanne, Switzerland, 2021, 215 p.

The transfer of forces through rough surface contact in concrete

Tirassa M.

EPFL PhD Thesis, n°7804, Lausanne, Switzerland, 2020, 239 p.

A Contribution to the Design of Textile Reinforced Concrete Structures

Valeri P

EPFL PhD Thesis, n°7490, Lausanne, Switzerland, 2020, 132 p.

Time-dependent strength of concrete in compression and shear

Tasevski D.

EPFL PhD Thesis, n°9559, Lausanne, Switzerland, 2019, 149 p.

The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement

Simões J. T.

EPFL PhD Thesis, n°8387, Lausanne, Switzerland, 2018, 223 p.

Development of a consistent approach for design and assessment of structural concrete members using stress fields and strut-and-tie models

Niketic F.

EPFL PhD Thesis, n° 7911, Lausanne, Switzerland, 2017, 193 p.

Shear in reinforced concrete without transverse reinforcement: from refined experimental measurements to mechanical models

Cavagnis F.

EPFL PhD Thesis, n° 8216, Lausanne, Switzerland, 2017, 223 p.

Stress fields for the interaction of in-plane and out-of-plane forces in reinforced concrete shell elements

Backes M.-R.

Thèse EPFL, N°7474, Lausanne, Switzerland, 2017, 167 p.

Influence of bond and anchorage conditions of the shear reinforcement on the punching strength of RC slabs

Brantschen F.

Thèse EPFL, n°7315, Lausanne, Suisse, 2016, 186 p. .

Seismic behaviour of slab-column connections without transverse reinforcement

Drakatos I.-S.

Lausanne, Switzerland, 2016, 196 p.

Punching Strength of Continuous Flat Slabs

Einpaul J.

EPFL PhD Thesis, n°6928, Lausanne, Switzerland, 2016, 209 p.

Static and Fatigue Shear Strength of Reinforced Concrete Slabs Under Concentrated Loads Near Linear Supports

Natário F.

EPFL PhD Thesis, n° 6670, Lausanne, Switzerland, 2015, 201 p.

Querkraftwiderstand von Stahlbeton- und Spannbetonträgern mittels Spannungsfeldern

Rupf M.

Thèse EPFL, n°6004, Lausanne, Switzerland, 2014, 132 p.

Éléments en béton armé soumis à une combinaison de flexion, effort tranchant et forces de déviation

Campana S.

Thèse EPFL, n°5574, Lausanne, Switzerland, 2013, 162 p.

Punching of Flat Slabs with Large Amounts of Shear Reinforcement

Lips S.

Thèse EPFL, n°5409, Lausanne, Switzerland, 2012, 273.

Influence de la précontrainte sur la résistance au poinçonnement des dalles en béton armé

Clément T.

Thèse EPFL, n°5516, Lausanne, Switzerland, 2012, 224 p.

Poinçonnement symétrique des dalles en béton armé avec armature de poinçonnement

Tassinari L.

Thèse EPFL, n°5030, Lausanne, Switzerland, 2011, 197 p.

Poinçonnement des planchers-dalles avec colonnes superposées fortement sollicitées

Guidotti R.

Thèse EPFL, n°4812, Lausanne, Switzerland, 2010, 230 p.

Post-Punching Behavior of Reinforced Concrete Slabs

Mirzaei Y.

Thèse EPFL, n°4613, Lausanne, Switzerland, 2010, 203 p.

Interaction sol-structure dans le domaine des ponts intégraux

Dreier D.

Thèse EPFL, n°4880, Lausanne, Switzerland, 2010, 155 p.

Comportement et modélisation des éléments de structures en Béton Fibré à Ultra-Hautes Performances avec armatures passives

Redaelli D.

Thèse EPFL, n°4298, Lausanne, Switzerland, 2009, 285 p.

Topologie des champs de contraintes pour le dimensionnement des structures en béton armé

Kostic N.

Thèse EPFL, n°4414, Lausanne, Switzerland, 2009, 235 p.

Structual implications of ultra-high performance fibre-reinforced concrete in bridge design

Spasojevic A.

EPFL PhD Thesis, n°4051, Lausanne, Switzerland, 2008, 285 p.

Interaction sol-structure dans le domaine des tranchées couvertes

Plumey S.

Thèse EPFL, n°3714, Lausanne, Switzerland, 2007, 299 p.

Shear Strength of Reinforced Concrete Bridge Deck Slabs

Vaz Rodrigues R.

EPFL PhD Thesis, n°3739, Lausanne, Switzerland, 2007, 289 p.

Zum Querkraftwiderstand von Stahl-und Spannbetonträgern mit dünnen Stegen

Hars E.

Thèse EPFL, n°3551, Lausanne, Switzerland, 2006, 275 p.

Zum Tragverhalten von zugbeanspruchten Bauteilen aus Ultra-Hochleistungs-Faserbeton

Jungwirth J.

Thèse EPFL , n°3429, Lausanne, Switzerland, 2006, 214 p.

Poinçonnement symétrique des dalles en béton armé

Guandalini S.

Thèse EPFL, n°3380 , Lausanne, Switzerland, 2005, 289 p.

Résistance au poinçonnement excentré des planchers-dalles

Krueger G.

Thèse EPFL, N° 2064, Lausanne, Switzerland, 1999, 173 p.

Analysis and Design of Anchorage Zones in Post-Tensioned Concrete Bridges

Burdet O.

PhD Dissertation, The University of Texas at Austin, Austin, USA, 1990, 433 p.

Die Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton

Muttoni A.

Birkhäuser Verlag, Institut für Baustatik und Konstruktion ETH Zürich, No 176, Basel, Switzerland, 1990, 164 p.