Recent IBETON publications
Peer reviewed Journal Articles
2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
2023
Bond of steel reinforcement based on detailed measurements: Results and interpretations
Corres E., Muttoni A.
Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.
Flat slab response for seismic and cyclic actions prediction with numerical models
Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.
Engineering structures, 289, 2023, 19 p.
Bond deterioration of corroded reinforcements in SFRC: Experiments and 3D laser scanning
Wang X. L., Liu Y. Q., Yoo D. Y.
Cement and Concrete Composites, Vol. 137, 2023, 19 p.
Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches
Ravasini S., Vecchi F., Belletti B., Muttoni A.
Engineering Structures, 284, 2023, 18 p.
Punching tests on edge slab-column connections with refined measurements
Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.
Engineering Structures, Vol. 288, 2023, 24 p.
Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear
Yu Q., Simões J. T., Muttoni A.
Engineering Structures, 2023
2022
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Explainable ensemble learning model for predicting steel section-concrete bond strength
Wang X. L., Chen A. R., Liu Y. Q.
Construction and Building Materials, 352 (2022), 2022, 16 p.
Enhancement of the punching shear verification of slabs with openings
Borges dos Santos J., Muttoni A., Melo G. S.
Structural Concrete, 2022, pp. 1-18.
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
2021
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer
Monserrat López A., Fernández Ruiz M., Miguel Sosa P.
Engineering Structures, 2021, 17 p.
The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Fernández Ruiz M.
Engineering Structures, 231, 2021, 17 p.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
Peer reviewed Conference Papers
2022
Evaluation of the model uncertainty of action effects in statically indeterminate systems
Malja X., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.
A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques
Hernández Fraile D., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
Conference Papers
2022
Validation of bond models for the crack width estimation based on detailed measurements
Corres E., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.
Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions
Corres E., Muttoni A.
Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.
Experimental investigation of dowel action using advanced measurement techniques
Pejatovic M., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.
Report
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
Theses
2023
Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures
Yu Q.
EPFL Thesis n° 10 159, Switzerland, 2023, 170.
2022
Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures
Monney F.
EPFL PhD Thesis, n° 8824, Lausanne, Switzerland, 2022, 184 p.
2021
The mechanics of shear failures in RC slabs based on refined measurements
Cantone R.
EPFL PhD Thesis, n° 7555, Lausanne, Switzerland, 2021, 160 p.
On the compressive and bond strength of reinforced concrete as structural properties
Moccia F.
EPFL PhD Thesis, n° 7765, Lausanne, Switzerland, 2021, 215 p.