Publications of IBETON

• Publications by theme
• Recent IBETON publications
• All publications
• Publications by IBETON members
• EPFL InfoScience
• Contributions of IBETON to the 2010 fib Model Code
• Continuous education by IBETON (2003-2011), mostly in French, links to documentations
• Older publications by IBAP (1982-1999), mostly in French

 

Textbooks

• The art of structures, Introduction to the functioning of structures in architecture
  par A. Muttoni, 2011
• L'art des structures, une introduction au fonctionnement des structures en architecture
  par A. Muttoni, 3^ème éd., 2010
• L'arte delle strutture, introduzione al funzionamento delle strutture in architettura
  par A. Muttoni, 2006
• Dimensionnement des structures en béton, Traité de Génie Civil, volume 8, 3^rd edition, 2004
  par R. Favre, J.-P. Jaccoud, O. Burdet et H. Charif
• Design of Concrete Structures with Stress Fields
  par A. Muttoni, J. Schwarz et B. Thürlimann, 1997

 

Dissertations

• Hernández Fraile D., Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns, EPFL PhD Thesis, n° 10680, Lausanne, 2024, 282 p.
• Malja X., Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures, Thesis dissertation, 2024.
• Corres E., Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications, PhD Thesis, EPFL, No 10772, 2024, 205 p.
• Yu Q., Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures, EPFL Thesis n° 10 159, 2023, 170.
• Monney F., Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures , EPFL PhD Thesis, n° 8824, Lausanne, 2022, 184 p.
• Cantone R., The mechanics of shear failures in RC slabs based on refined measurements, EPFL PhD Thesis, n° 7555, Lausanne, 2021, 160 p.
• Moccia F., On the compressive and bond strength of reinforced concrete as structural properties , EPFL PhD Thesis, n° 7765, Lausanne, 2021, 215 p.
• Tirassa M., The transfer of forces through rough surface contact in concrete , EPFL PhD Thesis, n°7804, Lausanne, 2020, 239 p.
• Valeri P, A Contribution to the Design of Textile Reinforced Concrete Structures, EPFL PhD Thesis, n°7490, Lausanne, 2020, 132 p.
• Tasevski D., Time-dependent strength of concrete in compression and shear , EPFL PhD Thesis, n°9559, Lausanne, 2019, 149 p.
• Simões J. T., The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement, EPFL PhD Thesis, n°8387, Lausanne, 2018, 223 p.
• Cavagnis F., Shear in reinforced concrete without transverse reinforcement: from refined experimental measurements to mechanical models, EPFL PhD Thesis, n° 8216, Lausanne, 2017, 223 p.
• Niketic F., Development of a consistent approach for design and assessment of structural concrete members using stress fields and strut-and-tie models, EPFL PhD Thesis, n° 7911, Lausanne, 2017, 193 p.
• Backes M.-R., Stress fields for the interaction of in-plane and out-of-plane forces in reinforced concrete shell elements, Thèse EPFL, N°7474, Lausanne, 2017, 167 p.
• Brantschen F., Influence of bond and anchorage conditions of the shear reinforcement on the punching strength of RC slabs, Thèse EPFL, n°7315, Lausanne, 2016, 186 p. .
• Einpaul J., Punching Strength of Continuous Flat Slabs, EPFL PhD Thesis, n°6928, Lausanne, 2016, 209 p.
• Natário F., Static and Fatigue Shear Strength of Reinforced Concrete Slabs Under Concentrated Loads Near Linear Supports, EPFL PhD Thesis, n° 6670, Lausanne, 2015, 201 p.
• Rupf M., Querkraftwiderstand von Stahlbeton- und Spannbetonträgern mittels Spannungsfeldern, Thèse EPFL, n°6004, Lausanne, 2014, 132 p.
• Campana S., Éléments en béton armé soumis à une combinaison de flexion, effort tranchant et forces de déviation, Thèse EPFL, n°5574, Lausanne, 2013, 162 p.
• Clément T., Influence de la précontrainte sur la résistance au poinçonnement des dalles en béton armé, Thèse EPFL, n°5516, Lausanne, 2012, 224 p.
• Lips S., Punching of Flat Slabs with Large Amounts of Shear Reinforcement, Thèse EPFL, n°5409, Lausanne, 2012, 273.
• Tassinari L., Poinçonnement symétrique des dalles en béton armé avec armature de poinçonnement, Thèse EPFL, n°5030, Lausanne, 2011, 197 p.
• Dreier D., Interaction sol-structure dans le domaine des ponts intégraux, Thèse EPFL, n°4880, Lausanne, 2010, 155 p.
• Guidotti R., Poinçonnement des planchers-dalles avec colonnes superposées fortement sollicitées, Thèse EPFL, n°4812, Lausanne, 2010, 230 p.
• Mirzaei Y., Post-Punching Behavior of Reinforced Concrete Slabs, Thèse EPFL, n°4613, Lausanne, 2010, 203 p.
• Kostic N., Topologie des champs de contraintes pour le dimensionnement des structures en béton armé, Thèse EPFL, n°4414, Lausanne, 2009, 235 p.
• Redaelli D., Comportement et modélisation des éléments de structures en Béton Fibré à Ultra-Hautes Performances avec armatures passives, Thèse EPFL, n°4298, Lausanne, 2009, 285 p.
• Spasojevic A., Structual implications of ultra-high performance fibre-reinforced concrete in bridge design, EPFL PhD Thesis, n°4051, Lausanne, 2008, 285 p.
• Vaz Rodrigues R., Shear Strength of Reinforced Concrete Bridge Deck Slabs, EPFL PhD Thesis, n°3739, Lausanne, 2007, 289 p.
• Plumey S., Interaction sol-structure dans le domaine des tranchées couvertes, Thèse EPFL, n°3714, Lausanne, 2007, 299 p.
• Hars E., Zum Querkraftwiderstand von Stahl-und Spannbetonträgern mit dünnen Stegen, Thèse EPFL, n°3551, Lausanne, 2006, 275 p.
• Jungwirth J., Zum Tragverhalten von zugbeanspruchten Bauteilen aus Ultra-Hochleistungs-Faserbeton, Thèse EPFL , n°3429, Lausanne, 2006, 214 p.
• Guandalini S., Poinçonnement symétrique des dalles en béton armé, Thèse EPFL, n°3380 , Lausanne, 2005, 289 p.