Publications of Aurelio Muttoni
Peer reviewed Journal Articles
2024
Image-based techniques to complement digital image correlation for initial and long-term characterization of cracks in reinforced concrete structures
Vincens B., Corres E., Muttoni A.
Engineering Structures, 2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
Model uncertainty in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures
Malja X., Nussbaumer A., Muttoni A.
Structural Concrete, 2024
2023
Bond of steel reinforcement based on detailed measurements: Results and interpretations
Corres E., Muttoni A.
Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.
Flat slab response for seismic and cyclic actions prediction with numerical models
Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.
Engineering structures, 289, 2023, 19 p.
Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches
Ravasini S., Vecchi F., Belletti B., Muttoni A.
Engineering Structures, 284, 2023, 18 p.
Punching tests on edge slab-column connections with refined measurements
Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.
Engineering Structures, Vol. 288, 2023, 24 p.
2022
Enhancement of the punching shear verification of slabs with openings
Borges dos Santos J., Muttoni A., Melo G. S.
Structural Concrete, 2022, pp. 1-18.
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Design of slender and squat reinforced concrete members with shear reinforcement
Pejatovic M., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, 17 p.
DOI : 10.1002/suco.202200887
2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
2020
A state of the art of flat-slab frame tests for gravity and lateral loading
Coronelli D., Muttoni A., Pascu I. R., Ramos A.P., Netti T.
Structural Concrete, 2020, 18 p.
Tensile response of textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 258, 2020, 22 p.
A detailed view on the rebar-to-concrete interaction based on refined measurement techniques
Cantone R., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 226, 2020, 19 p.
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.
Structural Concrete, 1, 2020, 28 p.
Influence of Load Duration on Shear Strength of Reinforced Concrete Members
Tasevski D., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.
Concrete compressive strength: From material characterization to a structural value
Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2020, 21 p.
Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields
Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 215, 2020, 14 p.
Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.
Structural Concrete, 2020, pp. 1-17.
Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack
Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.
2019
Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.
ACI Structural Journal, 116, 2019, 261-274.
Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions
Tasevski D., Fernández Ruiz M., Muttoni A.
Structural Concrete, 20, 2019, 971-985.
From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.
Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence
Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.
Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.
2018
Mechanical Model for Drift-Induced Punching of Slab- Column Connections without Transverse Reinforcement
Drakatos I.-S., Muttoni A., Beyer K.
ACI Structural Journal, V. 115 No. 2, Farmington Hills, USA, 2018, pp. 463-474.
Parametric analysis on punching shear resistance of reinforced-concrete continuous slabs
Belletti B., Muttoni A., Ravasini S., Vecchi F.
Magazine of Concrete Research, 2018, 14 p.
Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model
Simões J. T., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2018, pp. 191-216.
A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.
Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates
Tasevski D., Fernández Ruiz M., Muttoni A.
Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.
2017
The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions
Muttoni A., Fernández Ruiz M., Simões J. T.
Structural concrete, 2017, pp. 1-17.
Internal force distribution in RC slabs subjected to punching shear
Shu J., Belletti B., Muttoni A., Scolari M., Plos M.
Engineering Structures, 153 (2017), 2017, pp. 766-781.
An analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements
Cavagnis F., Fernández Ruiz M., Muttoni A.
Structural concrete, Vol. 19, 2017, pp. 49-64.
Test and lower bound modeling of keyed shear connections in RC shear walls
Sorensen J. H., Herfelt M. A., Hoang L. C., Muttoni A.
Engineering Structures, 155 (2018), 2017, pp. 115-126.
Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures
Fernández Ruiz M., Muttoni A.
Structural concrete, 2017, pp. 1-11.
Measurements of internal cracking in punching test slabs without shear reinforcement
Einpaul J., Fernández Ruiz M., Muttoni A.
Magazine of Concrete Research, 2017, 13 p.
2016
Internal slab-column connections under monotonic and cyclic imposed rotations
Drakatos I.-S., Muttoni A., Beyer K.
Engineering Structures, 123, 2016, pp. 501-516.
Performance of punching shear reinforcement under gravity loading: Influence of type and detailing
Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.
Punching shear capacity of continuous slabs
Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.
Study on Influence of Column Size and Slab Slenderness on Punching Strength
Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.
Strength of reinforced concrete footings without transverse reinforcement according to limit analysis
Simões J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 112, UK, 2016, pp. 146-161.
Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete
Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Structural Concrete, 17 No. 5, 2016, pp. 799-810.
Punching shear tests on compact footings with uniform soil pressure
Simões J. T., Bujnak J., Fernández Ruiz M., Muttoni A.
Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.
2015
Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models
Muttoni A., Fernández Ruiz M., Niketic F.
ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.
Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects
Fernández Ruiz M., Muttoni A., Sagaseta J.
Engineering structures, Vol. 99, UK, 2015, pp. 360-372.
Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement
Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.
Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.
Influence of moment redistribution and compressive membrane action on punching strength of flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 86, UK, 2015, pp. 43-57.
Experimental investigation of soil - structure interaction for transition slabs of integral bridges
Burdet O., Einpaul J., Muttoni A.
Structural Concrete, 16, 2015, pp 470-479.
Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 89, 2015, pp. 191-203.
Derivation of the σ-w relationship for SFRC from prism bending tests
Amin A., Foster S. J., Muttoni A.
Structural Concrete, 2015, pp. 93-105.
Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 103, UK, 2015, pp. 157-173.
2014
Shear Strength of Arch-Shaped Members without Transverse Reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 111, No. 1-6, USA, 2014
How simple can nonlinear finite element modelling be for structural concrete?
Argirova G., Fernández Ruiz M., Muttoni A.
Informes de la Construcción, Vol. 66, Spain, 2014, 8 p.
Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading
Micallef K., Sagaseta J., Fernández Ruiz M., Muttoni A.
International Journal of Impact Engineering, Vol. 71, 2014, pp. 17-33.
Influence of prestressing on the punching strength of post-tensioned slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Engineering structures, 2014, pp. 59-69.
Shear strength of RC slabs under concentrated loads near clamped linear supports
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 76 (2014), 2014, pp. 10-23.
Punching of flat slabs supported on rectangular columns
Sagaseta J., Tassinari L., Fernández Ruiz M., Muttoni A.
Engineering Structures, 77, 2014, pp. 17-33.
On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers
Faria D. M. V., Einpaul J., Ramos A.P., Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 73, Netherlands, 2014, pp. 366-377.
2013
Post-Punching Behavior of Flat Slabs
Fernández Ruiz M., Mirzaei Y., Muttoni A.
ACI Structural Journal, V. 110, USA, 2013, pp. 801-812.
Background to the Model Code 2010 Shear Provisions - Part II Punching Shear
Muttoni A., Fernández Ruiz M., Bentz E. C., Foster S. J., Sigrist V.
Structural Concrete, Ernst & Sohn, Vol.14, No. 3, Berlin, Germany, 2013, pp. 195-203.
Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 51, 2013, pp. 200-210.
Design for punching of prestressed concrete slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Structural Concrete, Vol. 14, No. 2, Lausanne, Switzerland, 2013, pp. 157-167.
Concrete shells – Towards efficient structures: Construction of an ellipsoidal concrete shell in Switzerland
Muttoni A., Lurati F., Fernández Ruiz M.
Structural Concrete, 2013
Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics
Campana S., Fernández Ruiz M., Anastasi A., Muttoni A.
Magazine of Concrete Research, Vol. 56, No. 6, UK, 2013, pp. 386-404.
Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges
Rupf M., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 56, 2013, pp. 357-371.
Background to the Model Code 2010 Shear Provisions - Part I: Beams and Slabs
Sigrist V., Bentz E. C., Fernández Ruiz M., Foster S. J., Muttoni A.
Structural Concrete, Vol. 14, No 3, Berlin, Germany, 2013, pp. 204-214.
2012
Effect of load distribution and variable depth on shear resistance of slender beams without stirrups
Pérez Caldentey A., Padilla P., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 109, USA, 2012, pp. 595-603.
Experimental Investigation on Punching Strength and Deformation Capacity of Shear-Reinforced Slabs
Lips S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 109, USA, 2012, pp. 889-900.
Levels-of-approximation approach in codes of practice
Muttoni A., Fernández Ruiz M.
Structural Engineering International, Vol. 2, Zurich, Switzerland, 2012, pp. 190-194.
The levels-of-approximation approach in MC 2010: application to punching shear provisions
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 13, No 1, 2012, pp. 32-41.
La teoría de la fisura crítica como base teórica para el diseño de losas frente a punzonamiento en el nuevo Código Modelo 2010 (The Critical Shear Crack Theory as a physical model for punching shear design and its implementation into new Model Code 2010)
Fernández Ruiz M., Sagaseta J., Muttoni A.
Hormigón y Acero, n° 263, Spain, 2012, pp. 49-63.
Punching shear strength of steel fibre reinforced concrete slabs
Maya Duque L. F., Fernández Ruiz M., Muttoni A., Foster S. J.
Engineering Structures, Vol. 40, UK, 2012, pp. 93-94.
2011
Authors’ closure on discussion by A. Windisch of paper “Strengthening of flat slabs against punching shear using post-installed shear reinforcement”
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, Vol. 108 N° 3, USA, 2011, pp. 382-383.
Transition Slabs of Integral Abutment Bridges
Dreier D., Burdet O., Muttoni A.
Structural Engineering International, Vol. 21 n° 2, 2011, pp. 144-150.
Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement
Sagaseta J., Muttoni A., Fernández Ruiz M., Tassinari L.
Magazine of Concrete Research, Vol. 63 No. 6, UK, 2011, pp. 441-457.
Authors’ closure on discussion by A. Windisch of paper “Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement”
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, Vol. 108 N° 4, 2011, pp. 505-506.
Crushing and Flexural Strength of Slab-Column Joints
Guidotti R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 33 n° 3, 2011, pp. 855-867 .
2010
Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 107, n° 5, Reston, USA, 2010, pp. 516-525.
Interaction between Bond and Deviation Forces in Spalling Failures of Arch-Shaped Members without Transverse Reinforcement
Fernández Ruiz M., Plumey S., Muttoni A.
ACI Structural Journal, V. 107, USA, 2010, pp. 346-354.
Strengthening of flat slabs against punching shear using post-installed shear reinforcement
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, V. 107 N° 4, USA, 2010, pp. 434-442.
Analytical and numerical analyses of the load-bearing capacity of retaining walls laterally supported at both ends
Plumey S., Muttoni A., Vulliet L., Labiouse V.
International Journal for numerical and analytical methods in geomechanics, 2010, 15 p.
Durchstanzen von Flachdecken bei hohen Stützenlasten
Guidotti R., Fernández Ruiz M., Muttoni A.
Beton- und Stahlbetonbau, 105, Berlin, Germany, 2010, 19-26.
2009
Discussion of paper 'Influence of Flexural Reinforcement on Shear Strength of Prestressed Concrete Beams' by E. I. Saquan and R. J. Frosch
Fernández Ruiz M., Campana S., Muttoni A.
ACI Structural Journal, Vol. 106, No. 6, Farmington Hills, USA, 2009, pp. 907-908.
Closure of discussion on paper 'Punching Tests of Slabs with Low Reinforcement Ratios'
Guandalini S., Burdet O., Muttoni A.
ACI Structural Journal, Reston, USA, 2009, pp. 911-912.
Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 106 N° 4, Farmington Hills, USA, 2009, pp. 485-494.
Aplicaciones de los campos de esfuerzos cortantes en el análsis y dimensionamiento de losas de hormigón armado - Applications of shear fields for analysis and design of reinforced concrete slabs
Fernández Ruiz M., Muttoni A.
Hormigón y Acero, Vol. 60 n° 252, Spain, 2009, pp. 73-88.
Punching tests of slabs with low reinforcement ratios
Guandalini S., Burdet O., Muttoni A.
ACI Structural Journal, V. 106, N°1, USA, 2009, pp. 87-95.
Modelling techniques to capture the backbone envelope behaviour of coupling beams subjected to seismic loading
Brena S. F., Fernández Ruiz M., Kostic N., Muttoni A.
Studi e ricerche, Starrylink, Vol. 29, Brescia, 2009
2008
Shear strength of thin-webbed post-tensioned beams
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol.105, No 3, USA, 2008, pp. 308-317.
Discussion of paper 'Factors affecting strength of elements designed using strut-and-tie models'
Muttoni A., Kostic N., Fernández Ruiz M.
ACI Structural Journal, 104-S36, USA, 2008, pp. 233-235.
Shear strength of members without transverse reinforcement as function of critical shear crack width
Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 105, No 2, Farmington Hills, USA, 2008, pp. 163-172.
Punching shear strength of reinforced concrete slabs without transverse reinforcement
Muttoni A.
ACI Structural Journal, Excel sheet, V. 105, N° 4, USA, 2008, pp. 440-450.
Nachträgliche Durchstanzbewehrung zur Verstärkung von Stahlbetonflachdecken
Muttoni A., Fernández Ruiz M., Kunz J.
Bauingenieur, Springer VDI Verlag, Vol. 83, Germany, 2008, pp. 503-511.
Shear strength of R/C bridge cantilever slabs
Vaz Rodrigues R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 30, Netherlands, 2008, pp. 3024-3033.
2007
Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges
Muttoni A., Fernández Ruiz M.
ASCE Journal of Bridge Engineering, 12, USA, 2007, pp. 646-653.
Analytical modelling of the pre- and post-yield behaviour of bond in reinforced concrete
Fernández Ruiz M., Muttoni A., Gambarova P.
ASCE Journal of Structural Engineering, Vol. 133, N° 10, Reston, USA, 2007, pp. 1364-1372.
On Development of Suitable Stress Fields for Structural Concrete
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 104, No 4, Farmington Hills, USA, 2007, pp. 495-502.
A re-evaluation of test data on bond in R/C by means of FEM modeling
Fernández Ruiz M., Muttoni A., Gambarova P.
Studi e ricerche, Starrylink, pub., V. 27, Brescia, Italy, 2007, pp. 113-134.
Relationship between nonlinear creep and cracking of concrete under uniaxial compression
Fernández Ruiz M., Muttoni A., Gambarova P.
Journal of Advanced Concrete Technology, Vol. 5, No 3, Japan, 2007, pp. 383-393.
Dimensionamiento y verificación del hormigón estructural mediante el método de los campos de tensiones
Muttoni A., Fernández Ruiz M.
Hormigón y Acero, No 243, Spain, 2007, pp. 93-102.
2006
Effect of Duct Type on the Shear Strength of Thin Webs
Muttoni A., Burdet O., Hars E.
ACI Structural Journal, Vol.103, No 5, Farmington Hills, USA, 2006, pp. 729-735.
2003
Schubfestigkeit und Durchstanzen von Platten ohne Querkraftbewehrung
Muttoni A.
Beton- und Stahlbetonbau, Vol. 98, No 2, Berlin, Germany, 2003, pp. 74-84.
2002
Brücken mit vorgespannter Stahlunterspannung
Muttoni A.
Stahlbau, Germany, 2002, pp. 592-597.
2023
Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear
Yu Q., Simões J. T., Muttoni A.
Engineering Structures, 2023
2024
Recalibration of partial safety factors for permanent loads
Malja X., Nussbaumer A., Muttoni A.
2024
Experimental investigation of dowel action in reinforcing bars using refined measurements
Pejatovic M., Muttoni A.
Structural Concrete, 2024
Journal Articles
2008
Deckenverstärkung gegen Durchstanzen
Kunz J., Diggelmann M., Muttoni A.
Der Bauingenieur, n° 6, Zürich, Switzerland, 2008, pp. 1-7.
2007
Champs de contraintes pour le béton structural
Muttoni A., Fernández Ruiz M.
Tracés, Vol. 133, n°5, Lausanne, Switzerland, 2007, pp. 17-21.
2002
Two bridges with composite prestressed tension chord
Muttoni A.
fib-CH, Structural Concrete in Switzerland, Osaka, Japan, 2002, pp. 72-75.
Punching of Prestressed Slabs - Application to Slab Bridges
Muttoni A., Burdet O., Guandalini S.
fib-CH, Swiss Contribution to the First fib Congress in Osaka, Zürich, Switzerland, 2002
2000
Consolidamento con jet-grouting della riva del Lago di Lugano
Grignoli G., Muttoni A., Pizzarotti E. M., Togliani G.
Quarry and Construction, n° 4, 2000
1998
Bewegte Berufsbilder
Muttoni A.
Schweizer Ingenieur und Architekten, 15, Switzerland, 1998, pp. 232-238.
1997
Zur Bemessung innerer Stützenkopfverstärkungen aus Stahl
Frangi T., Tonis D., Muttoni A.
Schweizer Ingenieur und Architekt, 12, Switzerland, 1997, 4 p.
Brücken mit einem innovativen statischen System
Muttoni A.
Schweizer Ingenieur und Architekten, Nr. 26, Zürich, Switzerland, 1997, pp. 28-31.
Eine gekrümmte Verbundbrücke für das Taktschiebeverfahren
Conzett J., Muttoni A.
Schweizer Ingenieur und Architekten, 26, Switzerland, 1997, pp. 544-547.
Peer reviewed Conference Papers
2022
A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques
Hernández Fraile D., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022
Evaluation of the model uncertainty of action effects in statically indeterminate systems
Malja X., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
2019
The potential of textile reinforced concrete for design of innovative structures
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.
Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.
Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs
Belletti B., Ravasini S., Vecchi F., Muttoni A.
6th International Symposium on Life-Cycle Civil Engineering (IALCCE), Ghent, Belgium, 2019, pp. 2745-2752.
New perspectives for design of lightweight structures by using textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
fib Symposium, Krakow, Poland, 2019, 8 p.
2018
Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions
Muttoni A., Fernández Ruiz M., Simões J. T.
fib Congress, Melbourne, Australia, 2018, 10 p.
Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.
Phd - Symposium, Prague, 2018
Experimental research on Textile Reinforced Concrete for the development of design tools
Valeri P, Fernández Ruiz M., Muttoni A.
12th fib PhD Symposium, Prague, Czech Republic, 2018
Modern experimental research techniques for a consistent understanding of aggregate interlocking
Tirassa M., Fernández Ruiz M., Muttoni A.
Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.
2017
Analytical model for slab-column connections subjected to cyclically increasing drifts
Drakatos I.-S., Beyer K., Muttoni A.
16th World Conference on Earthquake Engineering, Santiago, Chile, 2017
Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals
Tirassa M., Fernández Ruiz M., Anciaux G., Muttoni A.
2017 fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 740-448.
Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression
Moccia F., Fernández Ruiz M., Muttoni A.
fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 1234–1242.
2016
Punching shear strength and behaviour of compact reinforced concrete footings
Simões J. T., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.
Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions
Tasevski D., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.
Compressive membrane action effects on punching strength of flat RC slabs
Cantone R., Belletti B., Manelli L., Muttoni A.
Key Engineering Materials, 8th International Conference on Concrete under Severe Conditions - Environment and Loading, CONSEC 2016, Vol. 711, Lecco, Italy, 2016, pp. 698-705.
Approaches for suitable modelling and strength prediction of reinforced concrete slabs
Cantone R., Belletti B., Muttoni A., Fernández Ruiz M.
fib Symposium, Cape Town, South-Africa, 2016, pp. 21-23.
2015
Shear strength evaluation of RC bridge deck slabs according to CSCT with multi – layered shell elements and PARC_CL Crack Model
Belletti B., Scolari M., Muttoni A., Cantone R.
IABSE Conference Geneva 2015, Geneva, Switzerland, 2015, pp. 1158-1165.
Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete
Tasevski D., Fernández Ruiz M., Muttoni A.
10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.
Limit Analysis for Punching Shear Design of Compact Slabs and Footings
Simões J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.
fib Symposium, Copenhagen, Denmark, 2015, 13 p.
Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads
Natário F., Fernández Ruiz M., Muttoni A.
fib Congress, Copenhagen, Denmark, 2015, 9 p.
2014
Some innovative prestressed concrete structures in Switzerland
Muttoni A.
Keynote lecture at the 23rd Symposium on Developments in Prestressed Concrete, Japan Prestressed Concrete Institute, Morioka, Japan, 2014, 12 p.
Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)
Mata Falcón J., Fernández Ruiz M., Muttoni A.
VI Congreso ACHE, Madrid, Spain, 2014, 10 p.
Static and fatigue strength of RC slabs under concentrated loads near linear supports
Natário F., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 449-454.
Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs
Backes M.-R., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 403-408.
Punching resistance and flexural behaviour of continuous flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 425-436.
Experimental investigation on seismic behaviour of slab-column connections
Drakatos I.-S., Beyer K., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, 2014, pp. 255-261.
Punching strength of actual two-way slabs
Muttoni A., Fernández Ruiz M., Einpaul J.
4th fib Congress, Mumbai, India, 2014, 6 p.
Mechanical Model for flexural behaviour of slab-column connections under seismically induced deformations
Drakatos I.-S., Muttoni A., Beyer K.
4th fib Congress, Mumbai, India, 2014, 8 p.
Strength of arch-shaped members in bending and shear
Campana S., Fernández Ruiz M., Muttoni A.
4th fib Congress, Mumbai, India, 2014, 9 p.
2013
An experimental investigation into the tensile strength of steel fibre reinforced concrete
Amin A., Foster S. J., Boillet D., Muttoni A.
Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM22, Australia, 2013, pp. 1097-1103.
Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement
Rupf M., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013
Enhanced safety with post-installed shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Punching shear design in MC2010: incorporating new knowledge and grounding design expressions on physical models
Muttoni A., Fernández Ruiz M.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Influence of punching shear reinforcement on the flexural response of flat slabs
Lips S., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Evaluation of the tensile strength of SFRC as derived from inverse analysis of notched bending tests
Amin A., Foster S. J., Muttoni A.
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-8, Toledo, Spain, 2013, 9 p.
Punching shear strength of PC Slabs
Clément T., Muttoni A., Sagaseta J.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013
Failure analysis of edge flat-slab column connections with shear reinforcement
Bompa D. V., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
2012
Punching shear strength of R/C slabs subjected to fire
Bamonte P., Fernández Ruiz M., Muttoni A.
Proceedings of the 7th International Conference on Structures in Fire - SiF2012 (Eds. M. Fontana, A. Frangi, M. Knobloch), 2012, pp. 689-698.
Influence of geometric, strain and size effects on bond in structural concrete
Muttoni A., Fernández Ruiz M.
Bond in Concrete 2012, Brescia, Italy, 2012, pp. 15-21.
2011
New provisions for punching shear in Model Code 2010 based on the Critical Shear Crack Theory
Sagaseta J., Tassinari L., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 155-158.
Behaviour and design of slab-column joints
Guidotti R., Fernández Ruiz M., Muttoni A.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 399-402.
Applications of bent-up bars as shear and integrity reinforcement in R/C slabs
Tassinari L., Lips S., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 631-634.
2010
Performance and Design of Punching-Shear Reinforcing Systems
Fernández Ruiz M., Muttoni A.
3rd fib International Congress, N° 437, Washington D.C., USA, 2010, 14 p.
Applications of Stress Fields to Assess the Behavior and Strength of Coupling Beams subjected to Seismic Actions
Brena S. F., Fernández Ruiz M., Muttoni A.
3rd fib International Congress, n° 534, Washington D.C., USA, 2010, 10 p.
Design through an incremental approach: the Swiss experience
Muttoni A., Fernández Ruiz M.
Joint IABSE-fib Conference, Dubrovnik, Croatia, 2010, 8 p.
Experimental investigation of reinforced concrete slabs with punching shear reinforcement
Lips S., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 105-110.
Analysis and design of an innovative solution for tunnels using elastic-plastic stress fields
Campana S., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 75-80.
Influence of a Prestressing Eccentricity on the Punching Shear Strength of Post-Tensioned Slab Bridges
Clément T., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 63-68.
2009
Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement
Sagaseta J., Fernández Ruiz M., Muttoni A.
fib Symposium London 2009, London, UK, 2009, 8 p.
Thin UHPFRC slabs without conventional reinforcement as light-weight structural elements
Spasojevic A., Redaelli D., Muttoni A.
fib Symposium London 2009, London, UK, 2009, 8 p.
2008
Influence of tensile properties of UHPFRC on size effect in bending
Spasojevic A., Redaelli D., Fernández Ruiz M., Muttoni A.
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 303-310.
Shear strength in one- and two-way slabs according to the critical shear crack theory
Muttoni A., Fernández Ruiz M.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
Enhanced safety with post-installed punching shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
2007
Computer-aided development of stress fields for the analysis of structural concrete
Fernández Ruiz M., Muttoni A., Burdet O.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 591-598.
Tensile Behaviour of reinforced ultra-high performance fiber reinforced concrete elements
Redaelli D., Muttoni A.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 267-274.
Experimental investigation on the load-carrying capacity of thin webs including post-tensioning tendons
Fernández Ruiz M., Muttoni A., Hars E.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 483-490.
2006
Large Scale Tests on Bridge Slabs Cantilevers Subjected to Traffic Loads
Vaz Rodrigues R., Muttoni A., Burdet O.
Proceedings of the 2nd fib Congress, vol.1, Naples, 2006, 232 p.
Considérations sur l'interaction sol-structure dans le domaine des tranchées couvertes
Plumey S., Muttoni A.
fib-CH, Construction en béton en Suisse . The second fib-congress, June 5-8, 2006, Naples, Italy, Zürich, Switzerland, 2006, pp. 24-28.
Considerations on the design of cut-and-cover tunnels
Plumey S., Muttoni A., Vulliet L., Labiouse V.
ELU-ULS 2006 - Symposium international sur les états limites ultimes des ouvrages géotechniques, Marne-la-Vallée, France, 2006, pp. 379-386.
2005
Experimental investigation of the shear capacity of plastic hinges
Vaz Rodrigues R., Burdet O., Muttoni A.
fib Symposium, Budapest 2005, vol. 2, Budapest, Hungary, 2005, pp. 651-656.
2004
Plasticity in soil-structure interaction applied to cut-and-cover tunnels
Plumey S., Muttoni A., Vulliet L., Labiouse V.
5th International PhD Symposium in civil engineering, 2, Delft, Netherlands, 2004, pp. 989-995.
Structural Behavior of Tension Members in Ultra High Performance Concrete
Jungwirth J., Muttoni A.
International Symposium on Ultra High Performance Concrete, Kassel, 2004
FRC in Switzerland : research, applications and perspectives
Cadoni E., Teruzzi T., Muttoni A., Suter R., Brühwiler E.
International Workshop on Advanced Fiber Reinforced Concrete, Bergamo, Italy, 2004
2003
Innovationen im Brückenbau am Beispiel der unterspannten Tragwerke
Muttoni A.
Internationales Brückenbausymposium, Aktuelle Entwicklungen im Brückenbau, Darmstadt, Germany, 2003, 12 p.
2002
Underspanned Bridge Structures in Reactive Powder Concrete (RPC)
Jungwirth J., Muttoni A.
4th International PhD Symposium in Civil Engineering, Munich, Germany, 2002
2001
The Lake Lugano Crossing-Technical Solutions
Haugerud S. A., Olsen T. O., Muttoni A.
Swets& Zeitlinger B. V., Lisse, the Netherlands, Strait Crossings 2001, Krokeborg ed, Lisse, Netherlands, 2001, pp. 563-597.
A crossing Proposal for the Lake Lugano for the new AlpTransit Railway across the Alps
Muttoni A., Haugerud S. A., Olsen T. O.
Swets & Zeitlinger B. V., Lisse, the Netherlands, Strait Crossing 2001, Krokebord ed, Lisse, Netherlands, 2001, pp. 575-579.
1991
Behavior of Beams and Punching in Slabs without Shear Reinforcement
Muttoni A., Schwartz J.
IABSE Colloquium, Vol. 62, Stuttgart, Germany, 1991, pp. 703-708.
1990
Zur Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton
Muttoni A.
Deutscher Ausschuss für Stahlbeton, Forschungskolloquium, Berlin, Germany, 1990, pp. 1-6.
2018
Design of concrete structures using structural optimization based on the stress field method
Yu Q., Muttoni A., Fernández Ruiz M.
12th fib International PhD Symposium in Civil Engineering, 2018
Conference Papers
2022
Experimental investigation of dowel action using advanced measurement techniques
Pejatovic M., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.
Validation of bond models for the crack width estimation based on detailed measurements
Corres E., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.
Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions
Corres E., Muttoni A.
Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.
2012
Verification of details of existing structures with the elastic-plastic stress field method
Argirova G., Muttoni A.
9th fib International PhD Symposium in Civil Engineering, Vol. 1, Karlsruhe, Germany, 2012, pp. 153-158.
Behaviour and strength of existing bridges with low amount of shear reinforcement
Rupf M., Muttoni A.
Proceedings of the 9th fib International PhD Symposium in Civil Engineering, Karlsruhe, Germany, 2012, pp. 23-28.
2010
Test campaign on the influence of a prestessing eccentricity on the punching shear strength of post tensioned slab-bridges
Clément T., Muttoni A.
1st EPFL Doctoral Conference in Mechanics, Lausanne, Switzerland, 2010, 97.
2007
Shear strength predictions according to the critical shear crack theory and the Swiss code SIA 262 (2003)
Muttoni A., Fernández Ruiz M.
Workshop on assessment methods for determining the shear strength of existing structures, Rotterdam, Netherlands, 2007, 14 p.
2000
Crossing the Lugano Lake for the AlpTransit line; Submerged Floating Tunnels
Muttoni A.
Lecco, Italy, 2000
1996
Verbundstützen und Deckenanschlüsse
Muttoni A.
SIA D 0160, Les structures mixtes acier-béton, Eurocode 4, Dimensionnement, Réalisations, Zürich, Switzerland, 1996
Reports
2024
Créativité, rigueur et passion - Creativity, rigour and passion
Muttoni A., Guandalini S., Hars E., Jungwirth J., Plumey S., Vaz Rodrigues R., Spasojevic A., Redaelli D., Kostic N., Mirzaei Y., Guidotti N., Dreier D., Tassinari L., Lips S., Clément T., Campana S., Rupf M., Natário F., Einpaul J., Drakatos I.-S., Brantschen F., Backes M.-R., Niketic F., Cavagnis F., Simões J. T., Tasevski D., Valeri P, Tirassa M., Moccia F., Cantone R., Monney F., Yu Q., Pejatovic M., Malja X., Hernández Fraile D., Corres E.
IBETON, Switzerland, 2024, 178 p.
2022
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
2016
Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction
Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.
Rapport OFROU, N° 680, Switzerland, 2016, 134 p.
2013
Experimental verification of integral bridge abutments
Muttoni A., Dumont A.-G., Burdet O., Savvilotidou M., Einpaul J., Nguyen M. L.
Rapport OFROU, Switzerland, 2013, 86 p.
2010
Interaction sol-structure : Ponts à culées intégrales
Dreier D., Muttoni A.
Rapport OFROU, N° 646, Bern, Switzerland, 2010, 99 p.
2009
Dimensionnement et vérification des dalles de roulement des ponts routiers
Fernández Ruiz M., Vaz Rodrigues R., Muttoni A.
Rapport OFROU, N° 636, Bern, Switzerland, 2009, 53 p.
2008
Applications structurales du béton fibré à hautes performances aux ponts
Spasojevic A., Burdet O., Muttoni A.
Rapport OFROU, Zürich, Switzerland, 2008, 59 p.
2006
Commento sul punzonamento secondo norma SIA 262
Muttoni A., Guandalini S.
Switzerland, 2006, 14 p.
Kommentar zum Durchstanzen nach SIA 262
Muttoni A., Guandalini S.
Lausanne, Switzerland, 2006, 14 p.
Résistance à l'effort tranchant des poutres précontraintes à âmes minces
Fernández Ruiz M., Hars E., Muttoni A.
Rapport OFROU, N° 606, Bern, Switzerland, 2006, 68 p.
Evaluation des systèmes existants pour le suivi à long terme des déformations des ponts
Burdet O., Muttoni A.
Office fédéral des routes, N° 607, Bern, Switzerland, 2006, 57 p.
2005
Deckeneinsturz der Tiefgarage am Staldenacker in Gretzenbach
Muttoni A., Fürst A., Hunkeler F.
Medieninformation vom 15.11.2005, Solothurn, Switzerland, 2005, 14 p.
1988
Punching Shear, Draft Code Proposal
Muttoni A.
SIA Draft, SIA 162 / AG 5, Swiss Federal Institute of Technology - Zurich 1985, rév. 1988, Zürich, Switzerland, 1988, 14 p.
1984
Durchstanzversuche an Flachdecken mit Aussparungen
Mueller F. X., Muttoni A., Thürlimann B.
IBK - Bericht (ETHZ), Institut für Baustatik und Konstruktion der ETH Zürich, Birkhäuser Verlag, 7305-5, Zürich, Switzerland, 1984, 118 p.
Thesis
1990
Die Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton
Muttoni A.
Birkhäuser Verlag, Institut für Baustatik und Konstruktion ETH Zürich, No 176, Basel, Switzerland, 1990, 164 p.
Books
2012
L'art des structures; Une introduction au fonctionnement des structures en architecture
Muttoni A.
Presse Polytechnique et Universitaires Romandes, 2è édition, Lausanne, Switzerland, 2012, 270 p.
2011
The art of structures, Introduction to the functioning of structures in architecture
Muttoni A.
EPFL Press, Lausanne, Switzerland, 2011, 286 p.
2008
Poinçonnement des planchers-dalles : nouveaux acquis et applications pratiques
Muttoni A., Fernández Ruiz M., Burdet O.
Journée d'étude EPFL, 10 septembre 2008, Lausanne, Switzerland, 2008, 102 p.
Sécurité structurale des parkings couverts
Muttoni A.
Documentation SIA, A. Muttoni, Editor, Zürich, Switzerland, 2008, 105 p.
2006
L'arte delle strutture
Muttoni A.
Mendrisio Academy Press, Mendrisio, Switzerland, 2006, 264 p.
Dimensionamiento y concepción de estructuras en hormigón armado mediante campos de tensiones
Muttoni A., Schwartz J., Thürlimann B.
IS-BETON, Lausanne, Switzerland, 2006, 110 p.
2004
L'art des structures; Une introduction au fonctionnement des structures en architecture
Muttoni A.
Presses Polytechnique et Universitaires Romandes, Lausanne, Switzerland, 2004, 271 p.
1997
Bemessung von Betontragwerken mit Spannungsfeldern
Muttoni A., Schwartz J., Thürlimann B.
Birkhäuser Verlag, Basel, Switzerland, 1997, 145 p.
Design of Concrete Structures with Stress Fields
Muttoni A., Schwartz J., Thürlimann B.
Birkhäuser Verlag, Basel, Switzerland, 1997, 143 p.
Peer reviewed Book Chapters
2010
Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13
Bentz E. C., Foster S. J., Fernández Ruiz M., Muttoni A., Sigrist V., Walraven J. C.
Fédération Internationale du Béton, Bulletin 56, Lausanne, Switzerland, 2010
Shear in slabs and beams: should they be treated in the same way?
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 105-128.
The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 31-60.
Book Chapters
2008
Comportement mécanique des dalles et planchers-dalles en béton armé
Muttoni A., Guandalini S., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 13-28.
Analyse structurale et évaluation
Guandalini S., Muttoni A.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 45-62.
Exemples de renforcement contre le poinçonnement
Muttoni A., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 67-74.
2007
Poinçonnement des ponts-dalles
Muttoni A., Fernández Ruiz M., Guandalini S.
Documentation SIA, 4. FBH/ASTRA Studientagung 'Neues aus der Brückenforschung', D0223, Bern, Switzerland, 2007, pp. 85-94.
2003
Bauteile ohne Querkraftbewehrung
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.
Durchstanzen
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-65.
Pièces comprimées
Schertenleib P., Muttoni A., Schwartz J.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 67-77.
Introduction à la norme SIA 262
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.
Eléments sans armature d'effort tranchant
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.
Poinçonnement
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-66.
Druckglieder
Schertenleib P., Muttoni A., Schwartz J.
Documentation SIA, D 0182 Einführung in die Norm SIA 262, Zürich, Switzerland, 2003, pp. 67-77.
Einleitung in die Norm SIA 262
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.
1999
Ponts avec un système statique innovant
Muttoni A.
SIA D 0160, Progrès dans la conception des ouvrages en béton, Zürich, Switzerland, 1999, pp. 33-36.
1998
Plastizitätstheorie im Betonbau
Muttoni A., Schwartz J.
Ernst & Sohn, Der Ingenieurbau: Grundwissen in 9 Bändern (Hrsg. G. Mehlhorn), Bemessung, Berlin, Germany, 1998, pp. 333-366.
1997
Kahn L. I. : The Construction of the Kimbell Art Museum, An Analysis of the structure
Muttoni A.
I cataloghi dell’Accademia di Architettura, Skyra editore, Milan, Italy, 1997, pp. 104-111.
2008
Tragsicherheit von Einstellhallen
Muttoni A.
Dokumentation SIA, D0 226, Zürich, Switzerland, 2008, 105 p.
Teaching Documents
2011
Champs de contraintes et méthode des bielles et tirants - Applications dans la conception et le dimensionnement des structures en béton armé
Muttoni A., Fernández Ruiz M., Kostic N.
EPFL - IBETON, Lausanne, Switzerland, 2011, 117 p.
2004
Conception et dimensionnement des éléments de structures, béton armé
Muttoni A., Burdet O.
EPFL - IS-BETON, Polycopié cours 5ème semestre, Lausanne, Switzerland, 2004
1998
Strutture - un'introduzione al funzionamento delle strutture portanti in archittectura
Muttoni A.
Accademia di architettura, Lugano, Switzerland, 1998, 167 p.