IBETON Publications
Peer reviewed Journal Articles
2024
Verification of shear failures of cantilever bridge deck slabs subjected to concentrated loads
Setiawan A., Cantone R., Fernández Ruiz M., Muttoni A.
Engineering structures, 303, 2024, 22 p.
Image-based techniques to complement digital image correlation for initial and long-term characterization of cracks in reinforced concrete structures
Vincens B., Corres E., Muttoni A.
Engineering Structures, 2024
Model uncertainty in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures
Malja X., Nussbaumer A., Muttoni A.
Structural Concrete, 2024
Recalibration of partial safety factors for permanent loads
Malja X., Nussbaumer A., Muttoni A.
2024
Experimental investigation of dowel action in reinforcing bars using refined measurements
Pejatovic M., Muttoni A.
Structural Concrete, 2024
2023
Bond of steel reinforcement based on detailed measurements: Results and interpretations
Corres E., Muttoni A.
Structural Concrete, Vol. 24, No 6, 2023, pp. 7173-7204.
Flat slab response for seismic and cyclic actions prediction with numerical models
Coronelli D., Muttoni A., Martinelli L., Del Vecchio C., Gaetani M., Lignola G. P., Prota A., Kagermanov A., Marinkovic M.
Engineering structures, 289, 2023, 19 p.
Bond deterioration of corroded reinforcements in SFRC: Experiments and 3D laser scanning
Wang X. L., Liu Y. Q., Yoo D. Y.
Cement and Concrete Composites, Vol. 137, 2023, 19 p.
Verification of deflections and cracking of RC flat slabs with numerical and analytical approaches
Ravasini S., Vecchi F., Belletti B., Muttoni A.
Engineering Structures, 284, 2023, 18 p.
Punching tests on edge slab-column connections with refined measurements
Hernández Fraile D., Setiawan A., Borges dos Santos J., Muttoni A.
Engineering Structures, Vol. 288, 2023, 24 p.
Model uncertainties and partial safety factors of strain-based approaches for structural concrete: example of punching shear
Yu Q., Simões J. T., Muttoni A.
Engineering Structures, 2023
2022
Design of slender and squat reinforced concrete members with shear reinforcement
Pejatovic M., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, 17 p.
DOI : 10.1002/suco.202200887
Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression
Malja X., Ebrahimi Motlagh H. R., Fernández Ruiz M., Muttoni A.
Structural Concrete, Early view, 2022
Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members
Monney F., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2022, pp. 1-33.
Explainable ensemble learning model for predicting steel section-concrete bond strength
Wang X. L., Chen A. R., Liu Y. Q.
Construction and Building Materials, 352 (2022), 2022, 16 p.
Enhancement of the punching shear verification of slabs with openings
Borges dos Santos J., Muttoni A., Melo G. S.
Structural Concrete, 2022, pp. 1-18.
Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes
Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, 264, 2022, 114442.
Anchorage of shear reinforcement in beams and slabs
Monney F., Yu Q., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 265, 114340, 2022, 32 p.
Characterization of shear deformations in reinforced concrete members without shear reinforcement
Cantone R., Setiawan A., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 257, 113910, 2022, 16 p.
2021
Shear force redistributions and resistance of slabs and wide beams
Cantone R., Fernández Ruiz M., Muttoni A.
Structural Concrete, 22, 2021, pp. 2443-2465.
A consistent safety format and design approach for brittle systems and application to textile reinforced concrete structures
Yu Q., Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 249, 2021
Design against splitting failures in reinforced concrete due to concentrated forces and minimum bend diameter of reinforcement
Monney F., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 245, 112902, 2021, 23 p.
Spalling of concrete cover induced by reinforcement
Moccia F., Fernández Ruiz M., Muttoni A.
Engineering Structures, 2021, 19 p.
The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer
Monserrat López A., Fernández Ruiz M., Miguel Sosa P.
Engineering Structures, 2021, 17 p.
The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
Fernández Ruiz M.
Engineering Structures, 231, 2021, 17 p.
Casting position effects on bond performance of reinforcement bars
Moccia F., Fernández Ruiz M., Metelli G., Muttoni A., Plizzari G.
Structural Concrete, Wiley, 2021, 21 p.
2020
A state of the art of flat-slab frame tests for gravity and lateral loading
Coronelli D., Muttoni A., Pascu I. R., Ramos A.P., Netti T.
Structural Concrete, 2020, 18 p.
A detailed view on the rebar-to-concrete interaction based on refined measurement techniques
Cantone R., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 226, 2020, 19 p.
Tensile response of textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 258, 2020, 22 p.
Concrete compressive strength: From material characterization to a structural value
Moccia F., Yu Q., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2020, 21 p.
Modelling of Textile Reinforced Concrete in bending and shear with Elastic-Cracked Stress Fields
Valeri P, Fernández Ruiz M., Muttoni A.
Engineering Structures, 215, 2020, 14 p.
The influence of casting position and disturbance induced by reinforcement on the structural concrete strength
Moccia F., Kubski X., Fernández Ruiz M., Muttoni A.
Structural Concrete, 1, 2020, 28 p.
Influence of Load Duration on Shear Strength of Reinforced Concrete Members
Tasevski D., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol 117 n° 2, 2020, pp. 157-169.
Shear Strength of Members without Transverse Reinforcement Based on Development of Critical Shear Crack
Cavagnis F., Simões J. T., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 117, No. 1, Farmington Hills, USA, 2020, pp. 103-118.
Textile reinforced concrete for sustainable structures: Future perspectives and application to a prototype pavilion
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Fernández-Ordóñez D., Muttoni A.
Structural Concrete, 2020, pp. 1-17.
2019
Review of fundamental assumptions of the Two-Phase Model for aggregate interlocking in cracked concrete using numerical methods and experimental evidence
Pundir M., Tirassa M., Fernández Ruiz M., Muttoni A., Anciaux G.
Cement and Concrete Research, Elsevier, 125(105855), 2019, 1-17.
From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 20, Issue 4, 2019, pp. 1464-1480.
Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Cantone R., Fernández Ruiz M., Bujnak J., Muttoni A.
ACI Structural Journal, 116, 2019, 261-274.
Assessing the compressive strength of concrete under sustained actions: from refined models to simple design expressions
Tasevski D., Fernández Ruiz M., Muttoni A.
Structural Concrete, 20, 2019, 971-985.
2018
Parametric analysis on punching shear resistance of reinforced-concrete continuous slabs
Belletti B., Muttoni A., Ravasini S., Vecchi F.
Magazine of Concrete Research, 2018, 14 p.
Compressive Strength and Deformation Capacity of Concrete under Sustained Loading and Low Stress Rates
Tasevski D., Fernández Ruiz M., Muttoni A.
Journal of Advanced Concrete Technology, Japan, 2018, pp. 396-415.
Validation of the Critical Shear Crack Theory for punching of slabs without transverse reinforcement by means of a refined mechanical model
Simões J. T., Fernández Ruiz M., Muttoni A.
Structural Concrete, 2018, pp. 191-216.
Mechanical Model for Drift-Induced Punching of Slab- Column Connections without Transverse Reinforcement
Drakatos I.-S., Muttoni A., Beyer K.
ACI Structural Journal, V. 115 No. 2, Farmington Hills, USA, 2018, pp. 463-474.
A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Elsevier, Vol. 157, 2018, pp. 300-315.
2017
Response of RC panels accounting for crack development and its interaction with rebars
Hars E., Niketic F., Fernández Ruiz M.
Magazine of Concrete Research, 2017, 23 p.
Measurements of internal cracking in punching test slabs without shear reinforcement
Einpaul J., Fernández Ruiz M., Muttoni A.
Magazine of Concrete Research, 2017, 13 p.
An analysis of the shear-transfer actions in reinforced concrete members without transverse reinforcement based on refined experimental measurements
Cavagnis F., Fernández Ruiz M., Muttoni A.
Structural concrete, Vol. 19, 2017, pp. 49-64.
Internal force distribution in RC slabs subjected to punching shear
Shu J., Belletti B., Muttoni A., Scolari M., Plos M.
Engineering Structures, 153 (2017), 2017, pp. 766-781.
Test and lower bound modeling of keyed shear connections in RC shear walls
Sorensen J. H., Herfelt M. A., Hoang L. C., Muttoni A.
Engineering Structures, 155 (2018), 2017, pp. 115-126.
Influence of flanges on the shear-carrying capacity of reinforced concrete beams without web reinforcement
Ribas González C. R., Fernández Ruiz M.
Structural concrete, 18, 2017, pp. 720-732.
The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions
Muttoni A., Fernández Ruiz M., Simões J. T.
Structural concrete, 2017, pp. 1-17.
Size effect in shear and punching shear failures of concrete members without transverse reinforcement: Differences between statically determinate members and redundant structures
Fernández Ruiz M., Muttoni A.
Structural concrete, 2017, pp. 1-11.
2016
Internal slab-column connections under monotonic and cyclic imposed rotations
Drakatos I.-S., Muttoni A., Beyer K.
Engineering Structures, 123, 2016, pp. 501-516.
Punching shear tests on compact footings with uniform soil pressure
Simões J. T., Bujnak J., Fernández Ruiz M., Muttoni A.
Structural Concrete, n° 4, Suisse, 2016, pp. 603-617.
Bond Behaviour of Straight, Hooked, U-Shaped and Headed Bars in Cracked Concrete
Brantschen F., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Structural Concrete, 17 No. 5, 2016, pp. 799-810.
Punching shear capacity of continuous slabs
Einpaul J., Ospina C. E., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Farmington Hills, USA, 2016, pp. 861-872.
Performance of punching shear reinforcement under gravity loading: Influence of type and detailing
Einpaul J., Brantschen F., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 113, No 4, Farmington Hills, USA, 2016, pp. 827-838.
Strength of reinforced concrete footings without transverse reinforcement according to limit analysis
Simões J. T., Faria D. M. V., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 112, UK, 2016, pp. 146-161.
Study on Influence of Column Size and Slab Slenderness on Punching Strength
Einpaul J., Bujnak J., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 113, Farmington Hills, USA, 2016, pp. 135-145.
2015
Shear failures in reinforced concrete members without transverse reinforcement: An analysis of the critical shear crack development on the basis of test results
Cavagnis F., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 103, UK, 2015, pp. 157-173.
Design versus Assessment of Concrete Structures Using Stress Fields and Strut-and-Tie Models
Muttoni A., Fernández Ruiz M., Niketic F.
ACI Structural Journal, Vol.112, No 5, Farmington Hills, USA, 2015, pp. 605-616.
Experimental investigation of soil - structure interaction for transition slabs of integral bridges
Burdet O., Einpaul J., Muttoni A.
Structural Concrete, 16, 2015, pp 470-479.
Influence of Fatigue Loading in Shear Failures of Reinforced Concrete Members without Transverse Reinforcement
Fernández Ruiz M., Zanuy C., Natário F., Gallego J.M., Albajar L., Muttoni A.
Journal of Advanced Concrete Technology, vol. 13, Japan, 2015, pp. 263-274.
Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects
Fernández Ruiz M., Muttoni A., Sagaseta J.
Engineering structures, Vol. 99, UK, 2015, pp. 360-372.
Derivation of the σ-w relationship for SFRC from prism bending tests
Amin A., Foster S. J., Muttoni A.
Structural Concrete, 2015, pp. 93-105.
Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 89, 2015, pp. 191-203.
Influence of moment redistribution and compressive membrane action on punching strength of flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 86, UK, 2015, pp. 43-57.
2014
How simple can nonlinear finite element modelling be for structural concrete?
Argirova G., Fernández Ruiz M., Muttoni A.
Informes de la Construcción, Vol. 66, Spain, 2014, 8 p.
On the efficiency of flat slabs strengthening against punching using externally bonded fibre reinforced polymers
Faria D. M. V., Einpaul J., Ramos A.P., Fernández Ruiz M., Muttoni A.
Construction and Building Materials, Vol. 73, Netherlands, 2014, pp. 366-377.
Punching of flat slabs supported on rectangular columns
Sagaseta J., Tassinari L., Fernández Ruiz M., Muttoni A.
Engineering Structures, 77, 2014, pp. 17-33.
Shear strength of RC slabs under concentrated loads near clamped linear supports
Natário F., Fernández Ruiz M., Muttoni A.
Engineering structures, 76 (2014), 2014, pp. 10-23.
Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading
Micallef K., Sagaseta J., Fernández Ruiz M., Muttoni A.
International Journal of Impact Engineering, Vol. 71, 2014, pp. 17-33.
Shear Strength of Arch-Shaped Members without Transverse Reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, V. 111, No. 1-6, USA, 2014
Influence of prestressing on the punching strength of post-tensioned slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Engineering structures, 2014, pp. 59-69.
2013
Post-Punching Behavior of Flat Slabs
Fernández Ruiz M., Mirzaei Y., Muttoni A.
ACI Structural Journal, V. 110, USA, 2013, pp. 801-812.
Background to the Model Code 2010 Shear Provisions - Part I: Beams and Slabs
Sigrist V., Bentz E. C., Fernández Ruiz M., Foster S. J., Muttoni A.
Structural Concrete, Vol. 14, No 3, Berlin, Germany, 2013, pp. 204-214.
Post-tensioned girders with low amounts of shear reinforcement: Shear strength and influence of flanges
Rupf M., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 56, 2013, pp. 357-371.
Background to the Model Code 2010 Shear Provisions - Part II Punching Shear
Muttoni A., Fernández Ruiz M., Bentz E. C., Foster S. J., Sigrist V.
Structural Concrete, Ernst & Sohn, Vol.14, No. 3, Berlin, Germany, 2013, pp. 195-203.
Concrete shells – Towards efficient structures: Construction of an ellipsoidal concrete shell in Switzerland
Muttoni A., Lurati F., Fernández Ruiz M.
Structural Concrete, 2013
Design for punching of prestressed concrete slabs
Clément T., Ramos A.P., Fernández Ruiz M., Muttoni A.
Structural Concrete, Vol. 14, No. 2, Lausanne, Switzerland, 2013, pp. 157-167.
Behaviour of nodal regions of reinforced concrete frames subjected to opening moments and proposals for their reinforcement
Campana S., Fernández Ruiz M., Muttoni A.
Engineering Structures, Vol. 51, 2013, pp. 200-210.
Analysis of shear-transfer actions on one-way RC members based on measured cracking pattern and failure kinematics
Campana S., Fernández Ruiz M., Anastasi A., Muttoni A.
Magazine of Concrete Research, Vol. 56, No. 6, UK, 2013, pp. 386-404.
2012
Experimental Investigation on Punching Strength and Deformation Capacity of Shear-Reinforced Slabs
Lips S., Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 109, USA, 2012, pp. 889-900.
Effect of load distribution and variable depth on shear resistance of slender beams without stirrups
Pérez Caldentey A., Padilla P., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 109, USA, 2012, pp. 595-603.
Levels-of-approximation approach in codes of practice
Muttoni A., Fernández Ruiz M.
Structural Engineering International, Vol. 2, Zurich, Switzerland, 2012, pp. 190-194.
Punching shear strength of steel fibre reinforced concrete slabs
Maya Duque L. F., Fernández Ruiz M., Muttoni A., Foster S. J.
Engineering Structures, Vol. 40, UK, 2012, pp. 93-94.
La teoría de la fisura crítica como base teórica para el diseño de losas frente a punzonamiento en el nuevo Código Modelo 2010 (The Critical Shear Crack Theory as a physical model for punching shear design and its implementation into new Model Code 2010)
Fernández Ruiz M., Sagaseta J., Muttoni A.
Hormigón y Acero, n° 263, Spain, 2012, pp. 49-63.
The levels-of-approximation approach in MC 2010: application to punching shear provisions
Muttoni A., Fernández Ruiz M.
Structural Concrete, Vol. 13, No 1, 2012, pp. 32-41.
2011
Authors’ closure on discussion by A. Windisch of paper “Strengthening of flat slabs against punching shear using post-installed shear reinforcement”
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, Vol. 108 N° 3, USA, 2011, pp. 382-383.
Authors’ closure on discussion by A. Windisch of paper “Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement”
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, Vol. 108 N° 4, 2011, pp. 505-506.
Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement
Sagaseta J., Muttoni A., Fernández Ruiz M., Tassinari L.
Magazine of Concrete Research, Vol. 63 No. 6, UK, 2011, pp. 441-457.
Influence of aggregate fracture on shear transfer through cracks in reinforced concrete
Sagaseta J., Vollum R. L.
Magazine of Concrete Research, 63(2), London, UK, 2011, pp. 119-137.
Influence of beam cross-section, loading arrangement and aggregate type on shear strength
Sagaseta J., Vollum R. L.
Magazine of Concrete Research, London, England, 2011, pp. 139-155.
Transition Slabs of Integral Abutment Bridges
Dreier D., Burdet O., Muttoni A.
Structural Engineering International, Vol. 21 n° 2, 2011, pp. 144-150.
Crushing and Flexural Strength of Slab-Column Joints
Guidotti R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 33 n° 3, 2011, pp. 855-867 .
2010
Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement
Vaz Rodrigues R., Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 107, n° 5, Reston, USA, 2010, pp. 516-525.
Analytical and numerical analyses of the load-bearing capacity of retaining walls laterally supported at both ends
Plumey S., Muttoni A., Vulliet L., Labiouse V.
International Journal for numerical and analytical methods in geomechanics, 2010, 15 p.
Strengthening of flat slabs against punching shear using post-installed shear reinforcement
Fernández Ruiz M., Muttoni A., Kunz J.
ACI Structural Journal, V. 107 N° 4, USA, 2010, pp. 434-442.
Interaction between Bond and Deviation Forces in Spalling Failures of Arch-Shaped Members without Transverse Reinforcement
Fernández Ruiz M., Plumey S., Muttoni A.
ACI Structural Journal, V. 107, USA, 2010, pp. 346-354.
Durchstanzen von Flachdecken bei hohen Stützenlasten
Guidotti R., Fernández Ruiz M., Muttoni A.
Beton- und Stahlbetonbau, 105, Berlin, Germany, 2010, 19-26.
2009
Modelling techniques to capture the backbone envelope behaviour of coupling beams subjected to seismic loading
Brena S. F., Fernández Ruiz M., Kostic N., Muttoni A.
Studi e ricerche, Starrylink, Vol. 29, Brescia, 2009
Closure of discussion on paper 'Punching Tests of Slabs with Low Reinforcement Ratios'
Guandalini S., Burdet O., Muttoni A.
ACI Structural Journal, Reston, USA, 2009, pp. 911-912.
Discussion of paper 'Influence of Flexural Reinforcement on Shear Strength of Prestressed Concrete Beams' by E. I. Saquan and R. J. Frosch
Fernández Ruiz M., Campana S., Muttoni A.
ACI Structural Journal, Vol. 106, No. 6, Farmington Hills, USA, 2009, pp. 907-908.
Aplicaciones de los campos de esfuerzos cortantes en el análsis y dimensionamiento de losas de hormigón armado - Applications of shear fields for analysis and design of reinforced concrete slabs
Fernández Ruiz M., Muttoni A.
Hormigón y Acero, Vol. 60 n° 252, Spain, 2009, pp. 73-88.
Applications of the critical shear crack theory to punching of R/C slabs with transverse reinforcement
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 106 N° 4, Farmington Hills, USA, 2009, pp. 485-494.
Punching tests of slabs with low reinforcement ratios
Guandalini S., Burdet O., Muttoni A.
ACI Structural Journal, V. 106, N°1, USA, 2009, pp. 87-95.
2008
Nachträgliche Durchstanzbewehrung zur Verstärkung von Stahlbetonflachdecken
Muttoni A., Fernández Ruiz M., Kunz J.
Bauingenieur, Springer VDI Verlag, Vol. 83, Germany, 2008, pp. 503-511.
Shear strength of R/C bridge cantilever slabs
Vaz Rodrigues R., Fernández Ruiz M., Muttoni A.
Engineering structures, Vol. 30, Netherlands, 2008, pp. 3024-3033.
Shear strength of thin-webbed post-tensioned beams
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol.105, No 3, USA, 2008, pp. 308-317.
Discussion of paper 'Factors affecting strength of elements designed using strut-and-tie models'
Muttoni A., Kostic N., Fernández Ruiz M.
ACI Structural Journal, 104-S36, USA, 2008, pp. 233-235.
Punching shear strength of reinforced concrete slabs without transverse reinforcement
Muttoni A.
ACI Structural Journal, Excel sheet, V. 105, N° 4, USA, 2008, pp. 440-450.
Shear strength of members without transverse reinforcement as function of critical shear crack width
Muttoni A., Fernández Ruiz M.
ACI Structural Journal, V. 105, No 2, Farmington Hills, USA, 2008, pp. 163-172.
2007
Dimensionamiento y verificación del hormigón estructural mediante el método de los campos de tensiones
Muttoni A., Fernández Ruiz M.
Hormigón y Acero, No 243, Spain, 2007, pp. 93-102.
Relationship between nonlinear creep and cracking of concrete under uniaxial compression
Fernández Ruiz M., Muttoni A., Gambarova P.
Journal of Advanced Concrete Technology, Vol. 5, No 3, Japan, 2007, pp. 383-393.
A re-evaluation of test data on bond in R/C by means of FEM modeling
Fernández Ruiz M., Muttoni A., Gambarova P.
Studi e ricerche, Starrylink, pub., V. 27, Brescia, Italy, 2007, pp. 113-134.
Concrete Cracking in Tension Members and Application to Deck Slabs of Bridges
Muttoni A., Fernández Ruiz M.
ASCE Journal of Bridge Engineering, 12, USA, 2007, pp. 646-653.
Analytical modelling of the pre- and post-yield behaviour of bond in reinforced concrete
Fernández Ruiz M., Muttoni A., Gambarova P.
ASCE Journal of Structural Engineering, Vol. 133, N° 10, Reston, USA, 2007, pp. 1364-1372.
On Development of Suitable Stress Fields for Structural Concrete
Fernández Ruiz M., Muttoni A.
ACI Structural Journal, Vol. 104, No 4, Farmington Hills, USA, 2007, pp. 495-502.
2006
Effect of Duct Type on the Shear Strength of Thin Webs
Muttoni A., Burdet O., Hars E.
ACI Structural Journal, Vol.103, No 5, Farmington Hills, USA, 2006, pp. 729-735.
2005
Model Identification of Bridges Using Measurement Data
Robert-Nicoud Y., Raphael B., Burdet O., Smith I. F. C.
Computer-Aided Civil and Infrastructure Engineering, vol. 20, Malden, USA, 2005, pp. 188-131.
2004
Influence du comportement plastique de la structure sur l'état limite ultime dans les problèmes d'interaction sol-structure
Plumey S.
Publication de la Société Suisse de la Mécanique des Sols et des Roches, 148, 2004, pp. 85-91.
2003
Schubfestigkeit und Durchstanzen von Platten ohne Querkraftbewehrung
Muttoni A.
Beton- und Stahlbetonbau, Vol. 98, No 2, Berlin, Germany, 2003, pp. 74-84.
2002
Brücken mit vorgespannter Stahlunterspannung
Muttoni A.
Stahlbau, Germany, 2002, pp. 592-597.
1997
Wahl einer geeigneten Vorspannung
Favre R., Burdet O.
Beton- und Stahlbetonbau, Vol. 92 Nr 3, 1997, pp. 61-67.
1993
Load Testing and Monitoring of Swiss Bridges
Burdet O.
CEB Bulletin d’Information, Safety and Performance Concepts, 219, Lausanne, Switzerland, 1993
Journal Articles
2008
Deckenverstärkung gegen Durchstanzen
Kunz J., Diggelmann M., Muttoni A.
Der Bauingenieur, n° 6, Zürich, Switzerland, 2008, pp. 1-7.
2007
Champs de contraintes pour le béton structural
Muttoni A., Fernández Ruiz M.
Tracés, Vol. 133, n°5, Lausanne, Switzerland, 2007, pp. 17-21.
2004
i-structures, le projet
Burdet O., Zanella J.-L.
Flash Informatique EPFL, spécial été, Lausanne, Switzerland, 2004, pp. 40-48.
2002
Two bridges with composite prestressed tension chord
Muttoni A.
fib-CH, Structural Concrete in Switzerland, Osaka, Japan, 2002, pp. 72-75.
Punching of Prestressed Slabs - Application to Slab Bridges
Muttoni A., Burdet O., Guandalini S.
fib-CH, Swiss Contribution to the First fib Congress in Osaka, Zürich, Switzerland, 2002
2001
Vulnérabilité sismique du bâti existant suisse
Badoux M.
IAS, Lausanne, Switzerland, 2001, pp. 222-227.
2000
Bridges making a Difference; interview of Mr. Toni Ruttimann
Adey B., Badoux M., Brühwiler E.
Structural Engineering International, 10/1, Zürich, Switzerland, 2000
Consolidamento con jet-grouting della riva del Lago di Lugano
Grignoli G., Muttoni A., Pizzarotti E. M., Togliani G.
Quarry and Construction, n° 4, 2000
Le séisme de Kocaeli en Turquie : mission de reconnaissance
Badoux M., Studer J., Göksu E., Lestuzzi P.
IAS, Lausanne, Switzerland, 2000, 8 p.
1999
Introduction à la problématique de la vulnérabilité sismique du bâti existant - Situation Suisse
Badoux M.
Bulletin 1999 du Pool suisse pour la couverture des dommages sismiques, Bern, Switzerland, 1999
1998
Bewegte Berufsbilder
Muttoni A.
Schweizer Ingenieur und Architekten, 15, Switzerland, 1998, pp. 232-238.
Swissmetro: les ouvrages souterrains du tronçon pilote Genève-Lausanne
Badoux M., Wilhelm J.
Annuaire Technique de Transport en Suisse, 32, Lausanne, Switzerland, 1998, pp. 15-19.
1997
Zur Bemessung innerer Stützenkopfverstärkungen aus Stahl
Frangi T., Tonis D., Muttoni A.
Schweizer Ingenieur und Architekt, 12, Switzerland, 1997, 4 p.
Eine gekrümmte Verbundbrücke für das Taktschiebeverfahren
Conzett J., Muttoni A.
Schweizer Ingenieur und Architekten, 26, Switzerland, 1997, pp. 544-547.
Brücken mit einem innovativen statischen System
Muttoni A.
Schweizer Ingenieur und Architekten, Nr. 26, Zürich, Switzerland, 1997, pp. 28-31.
Books
2012
L'art des structures; Une introduction au fonctionnement des structures en architecture
Muttoni A.
Presse Polytechnique et Universitaires Romandes, 2è édition, Lausanne, Switzerland, 2012, 270 p.
2011
The art of structures, Introduction to the functioning of structures in architecture
Muttoni A.
EPFL Press, Lausanne, Switzerland, 2011, 286 p.
2008
Poinçonnement des planchers-dalles : nouveaux acquis et applications pratiques
Muttoni A., Fernández Ruiz M., Burdet O.
Journée d'étude EPFL, 10 septembre 2008, Lausanne, Switzerland, 2008, 102 p.
Sécurité structurale des parkings couverts
Muttoni A.
Documentation SIA, A. Muttoni, Editor, Zürich, Switzerland, 2008, 105 p.
2006
L'arte delle strutture
Muttoni A.
Mendrisio Academy Press, Mendrisio, Switzerland, 2006, 264 p.
Dimensionamiento y concepción de estructuras en hormigón armado mediante campos de tensiones
Muttoni A., Schwartz J., Thürlimann B.
IS-BETON, Lausanne, Switzerland, 2006, 110 p.
2004
Dimensionnement des structures en béton - Aptitude au service et éléments de structures
Favre R., Jaccoud J.-P., Burdet O., Charif H.
Presse Polytechnique et Universitaires Romandes, Traité de Génie Civil, Vol. 8, 3è éd., Lausanne, Switzerland, 2004, 612 p.
L'art des structures; Une introduction au fonctionnement des structures en architecture
Muttoni A.
Presses Polytechnique et Universitaires Romandes, Lausanne, Switzerland, 2004, 271 p.
1997
Design of Concrete Structures with Stress Fields
Muttoni A., Schwartz J., Thürlimann B.
Birkhäuser Verlag, Basel, Switzerland, 1997, 143 p.
Dimensionnement des structures en béton - Aptitude au service et éléments de structures
Favre R., Jaccoud J.-P., Burdet O., Charif H.
Presse Polytechnique et Universitaires Romandes, 2e édition, Traité de Génie Civil, Vol. 8, Lausanne, Switzerland, 1997, 586 p.
Bemessung von Betontragwerken mit Spannungsfeldern
Muttoni A., Schwartz J., Thürlimann B.
Birkhäuser Verlag, Basel, Switzerland, 1997, 145 p.
Peer reviewed Book Chapters
2010
Fédération Internationale du Béton (fib), Model Code 2010 - First complete draft, chapters 7.3 and 7.13
Bentz E. C., Foster S. J., Fernández Ruiz M., Muttoni A., Sigrist V., Walraven J. C.
Fédération Internationale du Béton, Bulletin 56, Lausanne, Switzerland, 2010
The Critical Shear Crack Theory as a mechanical model for punching shear design and its application to code provisions
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 31-60.
Shear in slabs and beams: should they be treated in the same way?
Muttoni A., Fernández Ruiz M.
Fédération Internationale du Béton, Bulletin 57, Lausanne, Switzerland, 2010, pp. 105-128.
Book Chapters
2008
Exemples de renforcement contre le poinçonnement
Muttoni A., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 67-74.
Analyse structurale et évaluation
Guandalini S., Muttoni A.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 45-62.
Comportement mécanique des dalles et planchers-dalles en béton armé
Muttoni A., Guandalini S., Fernández Ruiz M.
Documentation SIA, D 0226 : Sécurité structurale des parkings couverts, Zürich, Switzerland, 2008, pp. 13-28.
Tragsicherheit von Einstellhallen
Muttoni A.
Dokumentation SIA, D0 226, Zürich, Switzerland, 2008, 105 p.
2007
Poinçonnement des ponts-dalles
Muttoni A., Fernández Ruiz M., Guandalini S.
Documentation SIA, 4. FBH/ASTRA Studientagung 'Neues aus der Brückenforschung', D0223, Bern, Switzerland, 2007, pp. 85-94.
2003
Erdbebenbemessung
Badoux M., Lestuzzi P., Vogt R.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 79-89.
Durchstanzen
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-65.
Bauteile ohne Querkraftbewehrung
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.
Einleitung in die Norm SIA 262
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.
Druckglieder
Schertenleib P., Muttoni A., Schwartz J.
Documentation SIA, D 0182 Einführung in die Norm SIA 262, Zürich, Switzerland, 2003, pp. 67-77.
Poinçonnement
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 57-66.
Eléments sans armature d'effort tranchant
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 47-55.
Introduction à la norme SIA 262
Muttoni A.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 5-9.
Pièces comprimées
Schertenleib P., Muttoni A., Schwartz J.
Documentation SIA, D 0182 Introduction à la norme SIA 262, Zürich, Switzerland, 2003, pp. 67-77.
Dimensionnement parasismique
Badoux M., Lestuzzi P., Vogt R.
Documentation SIA, D 0182, Zürich, Switzerland, 2003, pp. 79-89.
Gebrauchstauglichkeit
Burdet O., Kenel A.
Documentation SIA, D 0182 (Deutsch), Zürich, Switzerland, 2003, pp. 105-118.
Aptitude au service
Burdet O., Kenel A.
Documentation SIA, D 0182, Zürich, Switzerland, 2003, pp. 107-120.
1999
Ponts avec un système statique innovant
Muttoni A.
SIA D 0160, Progrès dans la conception des ouvrages en béton, Zürich, Switzerland, 1999, pp. 33-36.
1998
Plastizitätstheorie im Betonbau
Muttoni A., Schwartz J.
Ernst & Sohn, Der Ingenieurbau: Grundwissen in 9 Bändern (Hrsg. G. Mehlhorn), Bemessung, Berlin, Germany, 1998, pp. 333-366.
1997
Kahn L. I. : The Construction of the Kimbell Art Museum, An Analysis of the structure
Muttoni A.
I cataloghi dell’Accademia di Architettura, Skyra editore, Milan, Italy, 1997, pp. 104-111.
Peer reviewed Conference Papers
2022
Evaluation of the model uncertainty of action effects in statically indeterminate systems
Malja X., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 895-902.
A new perspective on the punching resistance of edge columns with and without shear reinforcement applying refined measurement techniques
Hernández Fraile D., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022
Punching of edge columns with and without shear reinforcement: an experimental investigation
Hernández Fraile D., Setiawan A., Borges dos Santos J., Fernández Ruiz M., Muttoni A.
fib International Congress 2022 Oslo, Oslo, Norway, 2022
2021
A mechanical approach for the maximum punching resistance of shear-reinforced slab-column connections
Hernández Fraile D., Simões J. T., Fernández Ruiz M., Muttoni A.
fib Symposium 2021: Concrete Structures: New Trens for Eco-Efficiency and Performance, Lisboa, Portugal, 2021
2019
Dependency of punching shear resistance and membrane action on boundary conditions of reinforced concrete continuous slabs
Belletti B., Ravasini S., Vecchi F., Muttoni A.
6th International Symposium on Life-Cycle Civil Engineering (IALCCE), Ghent, Belgium, 2019, pp. 2745-2752.
New perspectives for design of lightweight structures by using textile reinforced concrete
Valeri P, Fernández Ruiz M., Muttoni A.
fib Symposium, Krakow, Poland, 2019, 8 p.
The potential of textile reinforced concrete for design of innovative structures
Valeri P, Guaita P., Baur R., Fernández Ruiz M., Muttoni A.
Proc. of the International fib Symposium on Conceptual Design of Structures, Madrid, Spain, 2019, 8 p.
2018
Recent improvements of the Critical Shear Crack Theory for punching shear design and its simplification for code provisions
Muttoni A., Fernández Ruiz M., Simões J. T.
fib Congress, Melbourne, Australia, 2018, 10 p.
Experimental research on Textile Reinforced Concrete for the development of design tools
Valeri P, Fernández Ruiz M., Muttoni A.
12th fib PhD Symposium, Prague, Czech Republic, 2018
Pedagogy through artisanal construction of thin-walled concrete elements: a dialogue between engineering and architecture
Valeri P, Guaita P., Baur R., Fernández Ruiz M.
IV Int. Conference on structural engineering education without borders, Madrid, Spain, 2018
Combining finite element analyses and mechanical models for the assessment of reinforced concrete slabs
Cantone R., Fernández Ruiz M., Muttoni A., Belletti B.
Phd - Symposium, Prague, 2018
Modern experimental research techniques for a consistent understanding of aggregate interlocking
Tirassa M., Fernández Ruiz M., Muttoni A.
Proceedings of the 12th fib PhD Symposium in Civil Engineering, Prague, Czech Republic, 2018, pp. 723-730.
Design of concrete structures using structural optimization based on the stress field method
Yu Q., Muttoni A., Fernández Ruiz M.
12th fib International PhD Symposium in Civil Engineering, 2018
2017
Efficiency Factors for Plastic Design in Concrete: Influence of Brittleness in Compression
Moccia F., Fernández Ruiz M., Muttoni A.
fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 1234–1242.
Interface Stresses in Cracked Concrete: Testing for Review of Its Fundamentals
Tirassa M., Fernández Ruiz M., Anciaux G., Muttoni A.
2017 fib Symposium High Tech Concrete: Where Technology and Engineering Meet, Maastricht, Netherlands, 2017, pp. 740-448.
Analytical model for slab-column connections subjected to cyclically increasing drifts
Drakatos I.-S., Beyer K., Muttoni A.
16th World Conference on Earthquake Engineering, Santiago, Chile, 2017
2016
Approaches for suitable modelling and strength prediction of reinforced concrete slabs
Cantone R., Belletti B., Muttoni A., Fernández Ruiz M.
fib Symposium, Cape Town, South-Africa, 2016, pp. 21-23.
Compressive membrane action effects on punching strength of flat RC slabs
Cantone R., Belletti B., Manelli L., Muttoni A.
Key Engineering Materials, 8th International Conference on Concrete under Severe Conditions - Environment and Loading, CONSEC 2016, Vol. 711, Lecco, Italy, 2016, pp. 698-705.
Behaviour of concrete in compression and shear under varying strain rates: from rapid to long-term actions
Tasevski D., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 881-886.
Punching shear strength and behaviour of compact reinforced concrete footings
Simões J. T., Fernández Ruiz M., Muttoni A.
11th fib International PhD Symposium in Civil Engineering, Tokyo, Japan, 2016, pp. 649-656.
2015
Analogy between Sustained Loading and Strain Rate Effects on the Nonlinear Creep Response of Concrete
Tasevski D., Fernández Ruiz M., Muttoni A.
10th International Conference on Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, Vienna, Austria, 2015, 1187-1193.
Shear strength evaluation of RC bridge deck slabs according to CSCT with multi – layered shell elements and PARC_CL Crack Model
Belletti B., Scolari M., Muttoni A., Cantone R.
IABSE Conference Geneva 2015, Geneva, Switzerland, 2015, pp. 1158-1165.
Shear-Fatigue Behaviour of RC Cantilever Bridge Deck Slabs under Concentrated Loads
Natário F., Fernández Ruiz M., Muttoni A.
fib Congress, Copenhagen, Denmark, 2015, 9 p.
Limit Analysis for Punching Shear Design of Compact Slabs and Footings
Simões J. T., Faria D. M. V., Muttoni A., Fernández Ruiz M.
fib Symposium, Copenhagen, Denmark, 2015, 13 p.
Fire Design of Concrete Structures based on a Levels-of-Approximation Approach
Fernández Ruiz M., Gómez Navarro M.., Bamonte P.
fib Symposium 2015, Copenhagen, Denmark, 2015, 9 p.
2014
Stress Fields for the analysis of the faillure load and cracking state of dapped-end beams (Aplicación de modelos de campos de tensiones para el análisis en servicio y rotura de apoyos a media madera)
Mata Falcón J., Fernández Ruiz M., Muttoni A.
VI Congreso ACHE, Madrid, Spain, 2014, 10 p.
Some innovative prestressed concrete structures in Switzerland
Muttoni A.
Keynote lecture at the 23rd Symposium on Developments in Prestressed Concrete, Japan Prestressed Concrete Institute, Morioka, Japan, 2014, 12 p.
Punching resistance and flexural behaviour of continuous flat slabs
Einpaul J., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 425-436.
Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs
Backes M.-R., Fernández Ruiz M., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 403-408.
Experimental investigation on seismic behaviour of slab-column connections
Drakatos I.-S., Beyer K., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, 2014, pp. 255-261.
Static and fatigue strength of RC slabs under concentrated loads near linear supports
Natário F., Muttoni A.
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec, Canada, 2014, pp. 449-454.
Strength of arch-shaped members in bending and shear
Campana S., Fernández Ruiz M., Muttoni A.
4th fib Congress, Mumbai, India, 2014, 9 p.
Mechanical Model for flexural behaviour of slab-column connections under seismically induced deformations
Drakatos I.-S., Muttoni A., Beyer K.
4th fib Congress, Mumbai, India, 2014, 8 p.
Punching strength of actual two-way slabs
Muttoni A., Fernández Ruiz M., Einpaul J.
4th fib Congress, Mumbai, India, 2014, 6 p.
2013
An experimental investigation into the tensile strength of steel fibre reinforced concrete
Amin A., Foster S. J., Boillet D., Muttoni A.
Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM22, Australia, 2013, pp. 1097-1103.
Evaluation of the tensile strength of SFRC as derived from inverse analysis of notched bending tests
Amin A., Foster S. J., Muttoni A.
VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-8, Toledo, Spain, 2013, 9 p.
Influence of punching shear reinforcement on the flexural response of flat slabs
Lips S., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Punching shear design in MC2010: incorporating new knowledge and grounding design expressions on physical models
Muttoni A., Fernández Ruiz M.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Enhanced safety with post-installed shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Failure analysis of edge flat-slab column connections with shear reinforcement
Bompa D. V., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013, 4 p.
Punching shear strength of PC Slabs
Clément T., Muttoni A., Sagaseta J.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013
Assessment of Shear Strength for Existing Bridges with Low Amounts of Shear Reinforcement
Rupf M., Fernández Ruiz M., Muttoni A.
fib Symposium Tel-Aviv 2013, Tel-Aviv, Israel, 2013
2012
Punching shear strength of R/C slabs subjected to fire
Bamonte P., Fernández Ruiz M., Muttoni A.
Proceedings of the 7th International Conference on Structures in Fire - SiF2012 (Eds. M. Fontana, A. Frangi, M. Knobloch), 2012, pp. 689-698.
Influence of geometric, strain and size effects on bond in structural concrete
Muttoni A., Fernández Ruiz M.
Bond in Concrete 2012, Brescia, Italy, 2012, pp. 15-21.
2011
Applications of bent-up bars as shear and integrity reinforcement in R/C slabs
Tassinari L., Lips S., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 631-634.
Behaviour and design of slab-column joints
Guidotti R., Fernández Ruiz M., Muttoni A.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 399-402.
New provisions for punching shear in Model Code 2010 based on the Critical Shear Crack Theory
Sagaseta J., Tassinari L., Muttoni A., Fernández Ruiz M.
fib Symposium Prague 2011, Prague, Czech Republic, 2011, pp. 155-158.
2010
Thermal effects in the Long-Term Monitoring of Bridges
Burdet O.
IABSE Symposium on Large structures and Infrastructures for environmentally constrained and urbanised areas, A-755, Venice, Italy, 2010, 7 p.
Influence of a Prestressing Eccentricity on the Punching Shear Strength of Post-Tensioned Slab Bridges
Clément T., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 63-68.
Analysis and design of an innovative solution for tunnels using elastic-plastic stress fields
Campana S., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 75-80.
Experimental investigation of reinforced concrete slabs with punching shear reinforcement
Lips S., Muttoni A.
Proceeding of the 8th fib-PhD Symposium, Copenhagen, Denmark, 2010, pp. 105-110.
Design through an incremental approach: the Swiss experience
Muttoni A., Fernández Ruiz M.
Joint IABSE-fib Conference, Dubrovnik, Croatia, 2010, 8 p.
Applications of Stress Fields to Assess the Behavior and Strength of Coupling Beams subjected to Seismic Actions
Brena S. F., Fernández Ruiz M., Muttoni A.
3rd fib International Congress, n° 534, Washington D.C., USA, 2010, 10 p.
Performance and Design of Punching-Shear Reinforcing Systems
Fernández Ruiz M., Muttoni A.
3rd fib International Congress, N° 437, Washington D.C., USA, 2010, 14 p.
Experience in the Long-Term Monitoring of Bridges
Burdet O.
3rd fib International Congress, N° 663, Washington D.C., USA, 2010, pp. 108-113.
2009
Unified formulation for Reissner-Mindlin plates: a comparison with numerical results
Tassinari L., Monleón S., Gentilini C.
IASS Symposium 2009, Valencia, Spain, Valencia, Spain, 2009, 2759-2770.
Thin UHPFRC slabs without conventional reinforcement as light-weight structural elements
Spasojevic A., Redaelli D., Muttoni A.
fib Symposium London 2009, London, UK, 2009, 8 p.
Non-symmetrical punching of flat slabs and slab bridges without transverse reinforcement
Sagaseta J., Fernández Ruiz M., Muttoni A.
fib Symposium London 2009, London, UK, 2009, 8 p.
2008
Enhanced safety with post-installed punching shear reinforcement
Kunz J., Fernández Ruiz M., Muttoni A.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
Shear strength in one- and two-way slabs according to the critical shear crack theory
Muttoni A., Fernández Ruiz M.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008
Influence of tensile properties of UHPFRC on size effect in bending
Spasojevic A., Redaelli D., Fernández Ruiz M., Muttoni A.
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 303-310.
Influence of soil-structure interaction on structural behaviour of integral bridge piers
Dreier D.
Proceedings of the 7th International FIB PhD Symposium, Stuttgart, Germany, 2008, pp. 11-20.
2007
Computer-aided development of stress fields for the analysis of structural concrete
Fernández Ruiz M., Muttoni A., Burdet O.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 591-598.
Tensile Behaviour of reinforced ultra-high performance fiber reinforced concrete elements
Redaelli D., Muttoni A.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 267-274.
Experimental investigation on the load-carrying capacity of thin webs including post-tensioning tendons
Fernández Ruiz M., Muttoni A., Hars E.
fib Symposium, Dubrovnik 2007, Dubrovnik, Croatia, 2007, pp. 483-490.
2006
Possibilites for Structural Improvements in the Design of Concrete Bridges
Spasojevic A.
Proceedings of the 6th Int. PhD Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 8 p.
Considérations sur l'interaction sol-structure dans le domaine des tranchées couvertes
Plumey S., Muttoni A.
fib-CH, Construction en béton en Suisse . The second fib-congress, June 5-8, 2006, Naples, Italy, Zürich, Switzerland, 2006, pp. 24-28.
Considerations on the design of cut-and-cover tunnels
Plumey S., Muttoni A., Vulliet L., Labiouse V.
ELU-ULS 2006 - Symposium international sur les états limites ultimes des ouvrages géotechniques, Marne-la-Vallée, France, 2006, pp. 379-386.
Computer-Based Development of Stress Fields
Kostic N.
Proceedings of the 6th Int. PhD Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 7 p.
Testing of reinforced high performance fibre concrete members in tension
Redaelli D.
Proceedings of the 6th Int. Ph.D. Symposium in Civil Engineering, Zurich 2006, Zürich, Switzerland, 2006, 8 p.
Shear Strength of RC Bridge Deck Cantilevers
Vaz Rodrigues R.
6th International PhD Symposium in Civil Engineering, IBK Publikation SP-015, 2006, pp. 160-161.
Large Scale Tests on Bridge Slabs Cantilevers Subjected to Traffic Loads
Vaz Rodrigues R., Muttoni A., Burdet O.
Proceedings of the 2nd fib Congress, vol.1, Naples, 2006, 232 p.
2005
Experimental investigation of the shear capacity of plastic hinges
Vaz Rodrigues R., Burdet O., Muttoni A.
fib Symposium, Budapest 2005, vol. 2, Budapest, Hungary, 2005, pp. 651-656.
2004
Plasticity in soil-structure interaction applied to cut-and-cover tunnels
Plumey S., Muttoni A., Vulliet L., Labiouse V.
5th International PhD Symposium in civil engineering, 2, Delft, Netherlands, 2004, pp. 989-995.
FRC in Switzerland : research, applications and perspectives
Cadoni E., Teruzzi T., Muttoni A., Suter R., Brühwiler E.
International Workshop on Advanced Fiber Reinforced Concrete, Bergamo, Italy, 2004
Structural Behavior of Tension Members in Ultra High Performance Concrete
Jungwirth J., Muttoni A.
International Symposium on Ultra High Performance Concrete, Kassel, 2004
2003
Innovationen im Brückenbau am Beispiel der unterspannten Tragwerke
Muttoni A.
Internationales Brückenbausymposium, Aktuelle Entwicklungen im Brückenbau, Darmstadt, Germany, 2003, 12 p.
2002
Decision Framework for Seismic Risk Management
Pellissier V., Badoux M.
12 th European Conference on Earthquake Engineering, London, UK, 2002, 10 p.
Underspanned Bridge Structures in Reactive Powder Concrete (RPC)
Jungwirth J., Muttoni A.
4th International PhD Symposium in Civil Engineering, Munich, Germany, 2002
Transposing multimedia into a virtual course
Burdet O., Laffranchi M.
4th International Conference on New Educational Environments, Lugano, Switzerland, 2002, pp. 1.3/11-14.
Long-Term Evaluation vs Short-Term Measurements : the Case of the Riddes Bridges
Burdet O., Zanella J.-L.
fib, Fib Congress 2002, Osaka, Osaka, Japan, 2002
Automatic Monitoring of the Riddes Bridges using Electronic Inclinometers
Burdet O., Zanella J.-L.
IABMAS, First International Conference on Bridge Maintenance, Safety and Management, Barcelona, Spain, 2002
2001
The Lake Lugano Crossing-Technical Solutions
Haugerud S. A., Olsen T. O., Muttoni A.
Swets& Zeitlinger B. V., Lisse, the Netherlands, Strait Crossings 2001, Krokeborg ed, Lisse, Netherlands, 2001, pp. 563-597.
A crossing Proposal for the Lake Lugano for the new AlpTransit Railway across the Alps
Muttoni A., Haugerud S. A., Olsen T. O.
Swets & Zeitlinger B. V., Lisse, the Netherlands, Strait Crossing 2001, Krokebord ed, Lisse, Netherlands, 2001, pp. 575-579.
Seismic Vulnerability of Traditional Masonry Buildings in Switzerland
Peter B. K., Badoux M.
20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001
Damage Prediction for Buildings with Reinforced Concrete Shear Walls
Peter B. K., Badoux M.
20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001
Methodology for Comparing Strategies in Seismic Risk Management of Existing Building Population
Pellissier V., Badoux M.
20th European Regional Earthquake Engineering Seminar, Sion, Switzerland, 2001
2000
Seismic vulnerability of older swiss reinforced concrete buildings
Badoux M., Peter B. K.
Paper No 566, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, 2000
Automatic Monitoring of Bridges using Electronic Inclinometers
Burdet O., Zanella J.-L.
IABSE, , Lucerne Congress Structural Engineering for Meeting Urban Transportation Challenges, Zürich, Switzerland, 2000, pp. 398-399.
Comparison of Internal and External Prestressing for Typical Highway Bridges
Burdet O., Badoux M.
IABSE, 16th Congress, Lucerne, Switzerland, 2000
Punching Strength of R.C. Flat Slabs with Moment Transfer
Krueger G., Burdet O.
International Workshop on Punching Shear, Stockholm, Sweden, 2000
1999
Amount of Prestressing Based on Serviceability Requirements
Favre R., Burdet O.
IABSE Rio 1999, Zürich, Switzerland, 1999, pp. 594-601.
Comparison of the amount of reinforcement for a box-girder bridge prestressed with Internal or extenal cables
Badoux M., Burdet O., Benouaich D.
fib Symposium Prague 1999, Prague, Czech Republic, 1999
Long-term deflection monitoring of prestressed concrete bridges retrofitted by external post-tensioning - examples from Switzerland
Burdet O., Badoux M.
IABSE Rio 1999, Rio de Janeiro, Brazil, 1999
1998
Automatic Deflection and Temperature Monitoring of a Balanced Cantilever Concrete Bridge
Burdet O.
5th International Conference of Short and Medium Span Bridges, Calgary, Canada, 1998
Vertical Displacement of Bridges Using the SOFO System: a Fiber Optic Monitoring Method for Structures
Perregaux N., Vurpillot S., Tosco J.-S., Inaudi D., Burdet O.
ASCE-12th Engineering Mechanics Conference Procedings: A force for the 21st Century, San Diego, USA, 1998, pp. 791-794.
Concrete tie model for the flexural behavior of RC and PC sections
Rossier S., Burdet O., Favre R.
2nd International PhD Symposium in Civil Engineering, Budapest, Hungary, 1998
Punching Tests on RC Flat Slabs with Eccentric Loading
Krueger G., Burdet O., Favre R.
Proceedings of the 2nd Int. Ph.D. Symposium in Civil Engineering, Budapest 1998, Budapest, Hungary, 1998, pp. 1-8.
1995
Dynamic load testing of Swiss bridges
Burdet O., Corthay S.
IABSE Symposium San Francisco, Extending the lifespan of structures, 73/2, Lausanne, Switzerland, 1995, pp. 1123-1128.
1994
Static and Dynamic Load Testing of Swiss Bridges
Burdet O., Corthay S.
International Bridge Conference Warsaw'94, Varsovie, Poland, 1994
Statistical Data Combined with Linear and Non-Linear Analysis to Interpret Bridge Load Tests
Favre R., Hassan M., Burdet O.
4th International Conference on Short and Medium Span Bridges, Halifax, Canada, 1994, pp. 1197-1208.
Critères pour le choix d'une précontrainte : Application au cas d'un renforcement
Favre R., Burdet O., Charif H.
Colloque international "Gestion des ouvrages d'art", Paris, France, 1994
1993
Interpretation of 200 Load Tests of Swiss Bridges
Hassan M., Burdet O., Favre R.
IABSE Colloquium, Remaining Structural Capacity, Copenhagen, Denmark, 1993, pp. 319-326.
Combination of Ultrasonic Measurements and Load Tests in Bridge Evaluation
Hassan M., Burdet O., Favre R.
Structural Faults + Repair, Edinburgh, UK, 1993
1991
Models and Tests of Anchorage Zones of Post-Tensioning Tendons
Burdet O., Sanders D. H., Roberts-Wollmann C. L., Breen J. E., Fenves G. L.
IABSE Stuttgart 91, Stuttgart, Germany, 1991, pp. 545-550.
Behavior of Beams and Punching in Slabs without Shear Reinforcement
Muttoni A., Schwartz J.
IABSE Colloquium, Vol. 62, Stuttgart, Germany, 1991, pp. 703-708.
1990
Zur Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton
Muttoni A.
Deutscher Ausschuss für Stahlbeton, Forschungskolloquium, Berlin, Germany, 1990, pp. 1-6.
Conference Papers
2022
Validation of bond models for the crack width estimation based on detailed measurements
Corres E., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 138-144.
Long anchorage resistance of reinforcement bars derived from local bond-slip relationships for good and poor bond conditions
Corres E., Muttoni A.
Bond in Concrete 2022, Stuttgart, Germany, 2022, pp. 207-216.
Experimental investigation of dowel action using advanced measurement techniques
Pejatovic M., Muttoni A.
14th fib International PhD Symposium in Civil Engineering, Rome, Italy, 2022, pp. 573-580.
2012
Verification of details of existing structures with the elastic-plastic stress field method
Argirova G., Muttoni A.
9th fib International PhD Symposium in Civil Engineering, Vol. 1, Karlsruhe, Germany, 2012, pp. 153-158.
Behaviour and strength of existing bridges with low amount of shear reinforcement
Rupf M., Muttoni A.
Proceedings of the 9th fib International PhD Symposium in Civil Engineering, Karlsruhe, Germany, 2012, pp. 23-28.
2010
Quasi-static cyclic tests of two prefabricated, reinforced masonry walls
Braun B., Rupf M., Beyer K., Dazio A.
14th European Conference on Earthquake Engineering, Ohrid, Macedonia, 2010, 8 p.
Test campaign on the influence of a prestessing eccentricity on the punching shear strength of post tensioned slab-bridges
Clément T., Muttoni A.
1st EPFL Doctoral Conference in Mechanics, Lausanne, Switzerland, 2010, 97.
Modified Geometry of Transition Slabs for Integral Bridges
Dreier D.
Proceedings of the 1st EPFL Doctoral Conference in Mechanics, Advances in Modern Aspects of Mechanics, Lausanne, Switzerland, 2010, pp. 107-110.
2009
Quasi-statisch zyklische Versuche an vorfabrizierten, bewehrten Mauerwerkswänden
Rupf M., Braun B., Beyer K., Dazio A.
SIA D0231 - Erdbeben und Mauerwerk, Zurich, Suisse, 2009, 8 p.
2008
Detail design of the MPU Heavy Lifter
Ludescher H., Haugerud S. A., Fernández Ruiz M.
fib Symposium, Amsterdam 2008, Amsterdam, Netherlands, 2008, pp. 931-937.
Post punching behaviour of reinforced concrete slab-column connections
Mirzaei Y.
7th International FIB PhD Symposium, Stuttgart, Germany, 2008, 8 p.
2007
Shear strength predictions according to the critical shear crack theory and the Swiss code SIA 262 (2003)
Muttoni A., Fernández Ruiz M.
Workshop on assessment methods for determining the shear strength of existing structures, Rotterdam, Netherlands, 2007, 14 p.
2000
Crossing the Lugano Lake for the AlpTransit line; Submerged Floating Tunnels
Muttoni A.
Lecco, Italy, 2000
1996
Verbundstützen und Deckenanschlüsse
Muttoni A.
SIA D 0160, Les structures mixtes acier-béton, Eurocode 4, Dimensionnement, Réalisations, Zürich, Switzerland, 1996
Teaching Documents
2011
Champs de contraintes et méthode des bielles et tirants - Applications dans la conception et le dimensionnement des structures en béton armé
Muttoni A., Fernández Ruiz M., Kostic N.
EPFL - IBETON, Lausanne, Switzerland, 2011, 117 p.
2004
Conception et dimensionnement des éléments de structures, béton armé
Muttoni A., Burdet O.
EPFL - IS-BETON, Polycopié cours 5ème semestre, Lausanne, Switzerland, 2004
1998
Strutture - un'introduzione al funzionamento delle strutture portanti in archittectura
Muttoni A.
Accademia di architettura, Lugano, Switzerland, 1998, 167 p.
Reports
2024
Créativité, rigueur et passion - Creativity, rigour and passion
Muttoni A., Guandalini S., Hars E., Jungwirth J., Plumey S., Vaz Rodrigues R., Spasojevic A., Redaelli D., Kostic N., Mirzaei Y., Guidotti N., Dreier D., Tassinari L., Lips S., Clément T., Campana S., Rupf M., Natário F., Einpaul J., Drakatos I.-S., Brantschen F., Backes M.-R., Niketic F., Cavagnis F., Simões J. T., Tasevski D., Valeri P, Tirassa M., Moccia F., Cantone R., Monney F., Yu Q., Pejatovic M., Malja X., Hernández Fraile D., Corres E.
IBETON, Switzerland, 2024, 178 p.
2022
Contribution to the updating of detailing rules for concrete structures
Muttoni A., Fernández Ruiz M., Moccia F., Monney F.
Rapport OFROU, AGB 2018/001 , FB 712, Suisse, 2022, 255 p.
2016
Assessment of existing structures based on elastic-plastic stress fields - Modelling of critical details and investigation of the in-plane shear transverse bending interaction
Muttoni A., Fernández Ruiz M., Niketic F., Backes M.-R.
Rapport OFROU, N° 680, Switzerland, 2016, 134 p.
2013
Poinçonnement des ponts-dalles précontraints
Clément T.
Vereinigung Schweizerischer Strassenfachleute (VSS), 653, Suisse, 2013, 79 p.
Experimental verification of integral bridge abutments
Muttoni A., Dumont A.-G., Burdet O., Savvilotidou M., Einpaul J., Nguyen M. L.
Rapport OFROU, Switzerland, 2013, 86 p.
2010
Interaction sol-structure : Ponts à culées intégrales
Dreier D., Muttoni A.
Rapport OFROU, N° 646, Bern, Switzerland, 2010, 99 p.
2009
Dimensionnement et vérification des dalles de roulement des ponts routiers
Fernández Ruiz M., Vaz Rodrigues R., Muttoni A.
Rapport OFROU, N° 636, Bern, Switzerland, 2009, 53 p.
2008
Applications structurales du béton fibré à hautes performances aux ponts
Spasojevic A., Burdet O., Muttoni A.
Rapport OFROU, Zürich, Switzerland, 2008, 59 p.
2006
Evaluation des systèmes existants pour le suivi à long terme des déformations des ponts
Burdet O., Muttoni A.
Office fédéral des routes, N° 607, Bern, Switzerland, 2006, 57 p.
Résistance à l'effort tranchant des poutres précontraintes à âmes minces
Fernández Ruiz M., Hars E., Muttoni A.
Rapport OFROU, N° 606, Bern, Switzerland, 2006, 68 p.
Commento sul punzonamento secondo norma SIA 262
Muttoni A., Guandalini S.
Switzerland, 2006, 14 p.
Kommentar zum Durchstanzen nach SIA 262
Muttoni A., Guandalini S.
Lausanne, Switzerland, 2006, 14 p.
2005
Deckeneinsturz der Tiefgarage am Staldenacker in Gretzenbach
Muttoni A., Fürst A., Hunkeler F.
Medieninformation vom 15.11.2005, Solothurn, Switzerland, 2005, 14 p.
2002
Inventaire simsique de la ville d'Aigle
Brennet G., Peter B. K., Badoux M.
IS-BETON, Lausanne, Switzerland, 2002
2001
Etanchéité à l'air et durabilité du béton armé sous vide partiel, projet SwissMetro
Badoux M., Fellay N.
Lausanne, Switzerland, 2001, 167 p.
2000
Précontrainte extérieure des ponts
Benouaich D., Badoux M., Burdet O.
Rapport OFROU, Mandat de recherche 94/98, VSS, 545, Zürich, Switzerland, 2000, 81 p.
1999
Influence de la rigidité des colonnes sur la résistance au poinçonnement
Krueger G., Burdet O., Favre R.
Rapport des essais IBAP - DGC - EPFL, No. 147, Lausanne, Switzerland, 1999, 107 p.
1998
Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires 1ère partie, Caractérisation thermique et mécanique de différentes formulations de bétons au moyen d'essais en laboratoire
Badoux M., Jaccoud J.-P., Fleury B.
IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 36 p.
Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires, 1ère partie (complément), caractérisation thermique et mécanique de différentes formulations de bétons au moyen d'essais en laboratoire
Badoux M., Jaccoud J.-P., Fleury B.
IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 34 p.
Bétons à hautes performances, recommandations & projet pilote, Tranchée couverte de Champ Baly, Etudes préliminaires, 2ème partie, Modélisation du comportement thermique et mécanique de la tranchée couverte de Champ Baly
Badoux M., Jaccoud J.-P., Fleury B.
IBAP - DGC - EPFL, Lausanne, Switzerland, 1998, 63 p.
1996
Beurteilung von Massivbrücken aufgrund von Belastungsversuchen und Langzeitbeobachtungen Empfehlung für die Vorspannung
Favre R., Burdet O.
Office fédéral des routes, 522, 1996
1995
Enseignements tirés d'essais de charge et d'observations à long terme pour l'évaluation des ponts en béton et le choix de la précontrainte
Favre R., Burdet O., Charif H., Hassan M., Markey I. F.
Rapport OFR, Lausanne, Switzerland, 1995
1988
Punching Shear, Draft Code Proposal
Muttoni A.
SIA Draft, SIA 162 / AG 5, Swiss Federal Institute of Technology - Zurich 1985, rév. 1988, Zürich, Switzerland, 1988, 14 p.
1984
Durchstanzversuche an Flachdecken mit Aussparungen
Mueller F. X., Muttoni A., Thürlimann B.
IBK - Bericht (ETHZ), Institut für Baustatik und Konstruktion der ETH Zürich, Birkhäuser Verlag, 7305-5, Zürich, Switzerland, 1984, 118 p.
Theses
2024
Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns
Hernández Fraile D.
EPFL PhD Thesis, n° 10680, Lausanne, Switzerland, 2024, 282 p.
Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures
Malja X.
Thesis dissertation, Switzerland, 2024
Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications
Corres E.
PhD Thesis, EPFL, No 10772, 2024, 205 p.
2023
Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures
Yu Q.
EPFL Thesis n° 10 159, Switzerland, 2023, 170.
2022
Revisiting Detailing Rules for Bending Bars, Anchorage and Minimum Shear Reinforcement in Concrete Structures
Monney F.
EPFL PhD Thesis, n° 8824, Lausanne, Switzerland, 2022, 184 p.
2021
The mechanics of shear failures in RC slabs based on refined measurements
Cantone R.
EPFL PhD Thesis, n° 7555, Lausanne, Switzerland, 2021, 160 p.
On the compressive and bond strength of reinforced concrete as structural properties
Moccia F.
EPFL PhD Thesis, n° 7765, Lausanne, Switzerland, 2021, 215 p.
2020
The transfer of forces through rough surface contact in concrete
Tirassa M.
EPFL PhD Thesis, n°7804, Lausanne, Switzerland, 2020, 239 p.
A Contribution to the Design of Textile Reinforced Concrete Structures
Valeri P
EPFL PhD Thesis, n°7490, Lausanne, Switzerland, 2020, 132 p.
2019
Time-dependent strength of concrete in compression and shear
Tasevski D.
EPFL PhD Thesis, n°9559, Lausanne, Switzerland, 2019, 149 p.
2018
The mechanics of punching in reinforced concrete slabs and footings without shear reinforcement
Simões J. T.
EPFL PhD Thesis, n°8387, Lausanne, Switzerland, 2018, 223 p.
2017
Development of a consistent approach for design and assessment of structural concrete members using stress fields and strut-and-tie models
Niketic F.
EPFL PhD Thesis, n° 7911, Lausanne, Switzerland, 2017, 193 p.
Shear in reinforced concrete without transverse reinforcement: from refined experimental measurements to mechanical models
Cavagnis F.
EPFL PhD Thesis, n° 8216, Lausanne, Switzerland, 2017, 223 p.
Stress fields for the interaction of in-plane and out-of-plane forces in reinforced concrete shell elements
Backes M.-R.
Thèse EPFL, N°7474, Lausanne, Switzerland, 2017, 167 p.
2016
Influence of bond and anchorage conditions of the shear reinforcement on the punching strength of RC slabs
Brantschen F.
Thèse EPFL, n°7315, Lausanne, Suisse, 2016, 186 p. .
Seismic behaviour of slab-column connections without transverse reinforcement
Drakatos I.-S.
Lausanne, Switzerland, 2016, 196 p.
Punching Strength of Continuous Flat Slabs
Einpaul J.
EPFL PhD Thesis, n°6928, Lausanne, Switzerland, 2016, 209 p.
2015
Static and Fatigue Shear Strength of Reinforced Concrete Slabs Under Concentrated Loads Near Linear Supports
Natário F.
EPFL PhD Thesis, n° 6670, Lausanne, Switzerland, 2015, 201 p.
2014
Querkraftwiderstand von Stahlbeton- und Spannbetonträgern mittels Spannungsfeldern
Rupf M.
Thèse EPFL, n°6004, Lausanne, Switzerland, 2014, 132 p.
2013
Éléments en béton armé soumis à une combinaison de flexion, effort tranchant et forces de déviation
Campana S.
Thèse EPFL, n°5574, Lausanne, Switzerland, 2013, 162 p.
2012
Punching of Flat Slabs with Large Amounts of Shear Reinforcement
Lips S.
Thèse EPFL, n°5409, Lausanne, Switzerland, 2012, 273.
Influence de la précontrainte sur la résistance au poinçonnement des dalles en béton armé
Clément T.
Thèse EPFL, n°5516, Lausanne, Switzerland, 2012, 224 p.
2011
Poinçonnement symétrique des dalles en béton armé avec armature de poinçonnement
Tassinari L.
Thèse EPFL, n°5030, Lausanne, Switzerland, 2011, 197 p.
2010
Poinçonnement des planchers-dalles avec colonnes superposées fortement sollicitées
Guidotti R.
Thèse EPFL, n°4812, Lausanne, Switzerland, 2010, 230 p.
Post-Punching Behavior of Reinforced Concrete Slabs
Mirzaei Y.
Thèse EPFL, n°4613, Lausanne, Switzerland, 2010, 203 p.
Interaction sol-structure dans le domaine des ponts intégraux
Dreier D.
Thèse EPFL, n°4880, Lausanne, Switzerland, 2010, 155 p.
2009
Comportement et modélisation des éléments de structures en Béton Fibré à Ultra-Hautes Performances avec armatures passives
Redaelli D.
Thèse EPFL, n°4298, Lausanne, Switzerland, 2009, 285 p.
Topologie des champs de contraintes pour le dimensionnement des structures en béton armé
Kostic N.
Thèse EPFL, n°4414, Lausanne, Switzerland, 2009, 235 p.
2008
Structual implications of ultra-high performance fibre-reinforced concrete in bridge design
Spasojevic A.
EPFL PhD Thesis, n°4051, Lausanne, Switzerland, 2008, 285 p.
2007
Interaction sol-structure dans le domaine des tranchées couvertes
Plumey S.
Thèse EPFL, n°3714, Lausanne, Switzerland, 2007, 299 p.
Shear Strength of Reinforced Concrete Bridge Deck Slabs
Vaz Rodrigues R.
EPFL PhD Thesis, n°3739, Lausanne, Switzerland, 2007, 289 p.
2006
Zum Querkraftwiderstand von Stahl-und Spannbetonträgern mit dünnen Stegen
Hars E.
Thèse EPFL, n°3551, Lausanne, Switzerland, 2006, 275 p.
Zum Tragverhalten von zugbeanspruchten Bauteilen aus Ultra-Hochleistungs-Faserbeton
Jungwirth J.
Thèse EPFL , n°3429, Lausanne, Switzerland, 2006, 214 p.
2005
Poinçonnement symétrique des dalles en béton armé
Guandalini S.
Thèse EPFL, n°3380 , Lausanne, Switzerland, 2005, 289 p.
1999
Résistance au poinçonnement excentré des planchers-dalles
Krueger G.
Thèse EPFL, N° 2064, Lausanne, Switzerland, 1999, 173 p.
1990
Analysis and Design of Anchorage Zones in Post-Tensioned Concrete Bridges
Burdet O.
PhD Dissertation, The University of Texas at Austin, Austin, USA, 1990, 433 p.
Die Anwendbarkeit der Plastizitätstheorie in der Bemessung von Stahlbeton
Muttoni A.
Birkhäuser Verlag, Institut für Baustatik und Konstruktion ETH Zürich, No 176, Basel, Switzerland, 1990, 164 p.